Just got the dawg up and going again after axle number three broke. Broke down and ordered the new HD axle from BD. Figured we have had such great luck with...
Hey Tom.. I shot you an email... We've got to get you in the NEBA loop on things... We're neighbors. Okay, I too live in Connecticut. Contact me via the email...
After five years of daily use pulling the heavy manure spreader, I need to replace some original parts as a precaution: The battery (cranking slower), muffler...
I removed and modified the battery box so that it would fit a battery I bought at Walmart. I also had to make a longer strap using boat top clips. The kind...
Has anyone tried to put a different engine on the yerfdog 150? I have a Kawasaki 18hp v-twin lawnmower engine that is in great sgape and I was wondering if it...
Erin, the stock Howhit engine was rated at 7.8 hp/7500 rpm. If you go above 8hp, you may have to change the torque converter to handle the extra horsepower....
I have a brand new 3206 rear axle for sale. I am asking $125 plus shipping to you. I also have a nearly new rear disk brake rotor, just light pad marks no...
Anyone else replace the rotor/stator? It was advertised as a high output unit with about 50% weight reduction in rotational mass. It was a bolt in and work...
If it was the 4-pole "racing" stator, forget about running any lights since it only puts out enough power for battery charging and ignition.I went with an...
If it is a lighter flywheel, the engine will change RPMs easier but have more trouble maintaining them under varying loads.How much climbing did you lose? I...
what is the biggest size engine that can be placed in a 3209 go kart. I currently have a 150 cc in now. Also it is not ideling right. THe more gas i give it...
I bought the front whel bearing replacement for my 3206. how do I put it in the rim? Do I need to pull the broken one out? do I put it in from the front or the...
pull the old bearing out the put the new one in from the out side there should be 2 bearings per wheel on inner one outer ________________________________ ...
There should be an inner and outer bearing on each front wheel. you will need to pull to them out and insert the new ones with smaller part of the offset...
OK I changed the bearings, took it fo a spin the other day. Now I try to start it, and nothing. I charged the battery overnight. checked all the plus and...
Here is a troubleshooting guide. Let us know what you find: http://www.buggydepot.com/buggy-tech-center/150cc/GY6-Ignition-Starting-Problems-No-Spark/6/...
Hi we have a yerf dog cart just like the one on the home page I got a new belt 743x20x30 is this the right one it seems very tight does anybody know what belt...
743-20-30 is the correct belt. The CVT drive is designed to ride the belt tight without any slip, however a turned roller may cause problems. Let us know if...
The forward shaft is the crank. On the crank is the variator with rollers inside. You must make sure that the rollers are positioned so they roll from the...
what i just experianced on mine is the drivin clutch nut backed off and it just screwed up the clutch timing it would start unless the wheels was off the...
k i have a modified gy6 150 i installed the stroker crank and a big bore kit the larger carb the performance exhast a performance cam with spring and a 114 jet...
Running a 114 main jet with big bore and stroker probably resulted in an overly lean condition. You will need to pull the head and look for heat damage....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
