Which was the "400 hill"?

--- In yerfdoggx150@yahoogroups.com, "Bill Dunk" <bslamd@...> wrote:
>
> Hey Guy48065,
>
> The Buggy Bash was awesome!!!
>
> I am still have withdrawals- It needs to be a 4 day deal!!! Don't
you agree
>
> I brought my HH250 SS, a YD GX150 (which by the way made the grade
on the
> 400 hill- there was about 8-10 karts at the bottom(blister, jabo,
kurtsty,
> blade girl, and a few others and they were ALL having trouble
making this
> hill actually only 1 kart made it until the Yerf-Dog zipped right
up there.
> I guess the lighter frame weight and getting the gear set-up really
got
> attention from the other folks. They said was that the YERF!!!!
>
> -----Original Message-----
> From: yerfdoggx150@yahoogroups.com
[mailto:yerfdoggx150@yahoogroups.com] On
> Behalf Of guy48065
> Sent: Tuesday, May 09, 2006 9:58 AM
> To: yerfdoggx150@yahoogroups.com
> Subject: [yerfdoggx150] Who attended the Buggy Bash this weekend?
>
> Did anybody here attend the big buggy rally in Kentucky this
weekend?
> It was a BLAST!  Miles of tough trails and plenty of mud at Paddy's
> Bluff in Dycusburg.  I posted a group shot in my album.  Sometimes
I
> feel a little obsessed with my involvement in these "toys" so it
was
> terrific to be among 100 or so other obsessed guys beating the snot
> out of their buggys for 3 days.
> I met so many great people and learned and saw so much.  If another
> such event comes along try like hell to attend--you won't regret it.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>

i think you're describing the slide & needle.  The stock carb is vacuum
operated and there's a rubber diaphragm on the top that moves the slide
to let air & fuel through.  Maybe you put it together wrong and there's
no vacuum signal to lift the slide.  The service manual in the Files
section has some good pictures & info on the carb.

--- In yerfdoggx150@yahoogroups.com, "smilninside"
<happinesspending@...> wrote:
>
> Recap,  float stuck, fixed float, also took top of carb off like an
> idiot and probably put it back together wrong.  Lets just say that
> barely idles and stalls when step on gas.  But if i reach inside
> intake of carb and push up on the rubber(choke)that encompasses the
> needle, it runs like a beast.   Can somebody please give picture or
> details of this portion of carb.
>
> thank you in advance
>

http://shxs.en.alibaba.com/product/50032829/50143234/Rubber_Carburetor_
Seal_Elements/Rubber_Carburetor_Seal_Elements__PD24J_Series_/showimg.ht
ml

Recap,  float stuck, fixed float, also took top of carb off like an
idiot and probably put it back together wrong.  Lets just say that
barely idles and stalls when step on gas.  But if i reach inside
intake of carb and push up on the rubber(choke)that encompasses the
needle, it runs like a beast.   Can somebody please give picture or
details of this portion of carb.

thank you in advance

Try Eric @www.bajasports.net.  I am not sure if he is Eric with a K or a C.  He
is the guy in charge of the Yerf Dog parts that were bought back from Pep Boys
and what he has got is what he has got.  By the way, easier to talk with him @
888-863-252.  Good Luck! and yes, Yerf Dog is gone....DT

-------------- Original message --------------
From: amanda gunthorp <mamaboys321@...>
I was wondering if anyone out there knew where to get parts?  I cannot get
through to the Yerfdog co. via web or phone.  I heard they were bought out by
Baja Motors?  It is really frustrating to have such a neat machine and no place
to get parts.  Thanks!

---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

[Non-text portions of this message have been removed]



SPONSORED LINKS Auto racing poster Auto racing safety equipment Auto racing
apparel
Auto racing helmet Auto racing seat Auto racing flag



YAHOO! GROUPS LINKS

  Visit your group "yerfdoggx150" on the web.

  To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

I was wondering if anyone out there knew where to get parts?  I cannot get
through to the Yerfdog co. via web or phone.  I heard they were bought out by
Baja Motors?  It is really frustrating to have such a neat machine and no place
to get parts.  Thanks!

---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

[Non-text portions of this message have been removed]

I had 2 engines do the exact same thing, and they BLEW white smoke,
and just all of a sudden. No warning. It would run the engine dry of
oil if you would let it.
  On the lighter side, I didn't have any bugs in the yard when the
kids rode it. It was under warranty both times, Yerf replaced the
engine twice.
  There was no mistaking the smell of oil.




--- In yerfdoggx150@yahoogroups.com, "guy48065" <guy48065@...> wrote:
>
> I assumed you meant blue smoke.  White smoke & carbon buildup
sounds
> like you're too rich.  Maybe your choke is stuck ON.  The service
> manual (Files section) describes how to remove it & test.
>
> --- In yerfdoggx150@yahoogroups.com, jerry smith <spinningcain@>
> wrote:
> >
> > ya I pulled the head off last night and theres a whole lot of
> carbon buildup on the face of the piston and the valve chamber I
> might try and clean everything up and reinstall still cant figure
out
> why its so carboned up but maybe thats causing the white
> smoke?..............thanks for the reply.....the rings look
> good.......thanks.......jerry
> >
> > guy48065 <guy48065@> wrote:  You could contact
> > http://www.bajamotorsports.net/
> > the Dune 150 uses the same motor.  Just about any GY6 150cc in
any
> > buggy will interchange.  Get one with reverse and you're BETTER
> than
> > new!
> > Sometimes they show up on eBay.
> > I'm sure a ring job would be much cheaper than a whole engine.
> Don't
> > know why you would suddenly start burning oil...Is your air
filter
> > intact?
> >
> > --- In yerfdoggx150@yahoogroups.com, "braveskckass"
> > <spinningcain@> wrote:
> > >
> > > will my sons yerf started burning oil all the sudden today now
> its
> > > blowing smoke and using oil real fast guees it needs rebuilt
its
> > just
> > > so sudden just a couple of days ago it was running great anyone
> > know a
> > > good place to get a howit replacement motor?.........Jerry
> > >
> >
> >
> >
> >
> >
> >
> >
> >   SPONSORED LINKS
> >         Auto racing seat   Auto racing school   Auto racing
> ticket     Auto racing safety equipment   Auto racing helmet   Auto
> racing flag
> >
> > ---------------------------------
> >   YAHOO! GROUPS LINKS
> >
> >
> >     Visit your group "yerfdoggx150" on the web.
> >
> >     To unsubscribe from this group, send an email to:
> >  yerfdoggx150-unsubscribe@yahoogroups.com
> >
> >     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> > ---------------------------------
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

Hey Guy48065,

The Buggy Bash was awesome!!!

I am still have withdrawals- It needs to be a 4 day deal!!! Don't you agree

I brought my HH250 SS, a YD GX150 (which by the way made the grade on the
400 hill- there was about 8-10 karts at the bottom(blister, jabo, kurtsty,
blade girl, and a few others and they were ALL having trouble making this
hill actually only 1 kart made it until the Yerf-Dog zipped right up there.
I guess the lighter frame weight and getting the gear set-up really got
attention from the other folks. They said was that the YERF!!!!

-----Original Message-----
From: yerfdoggx150@yahoogroups.com [mailto:yerfdoggx150@yahoogroups.com] On
Behalf Of guy48065
Sent: Tuesday, May 09, 2006 9:58 AM
To: yerfdoggx150@yahoogroups.com
Subject: [yerfdoggx150] Who attended the Buggy Bash this weekend?

Did anybody here attend the big buggy rally in Kentucky this weekend?
It was a BLAST!  Miles of tough trails and plenty of mud at Paddy's
Bluff in Dycusburg.  I posted a group shot in my album.  Sometimes I
feel a little obsessed with my involvement in these "toys" so it was
terrific to be among 100 or so other obsessed guys beating the snot
out of their buggys for 3 days.
I met so many great people and learned and saw so much.  If another
such event comes along try like hell to attend--you won't regret it.







Yahoo! Groups Links

Did anybody here attend the big buggy rally in Kentucky this weekend?
It was a BLAST!  Miles of tough trails and plenty of mud at Paddy's
Bluff in Dycusburg.  I posted a group shot in my album.  Sometimes I
feel a little obsessed with my involvement in these "toys" so it was
terrific to be among 100 or so other obsessed guys beating the snot
out of their buggys for 3 days.
I met so many great people and learned and saw so much.  If another
such event comes along try like hell to attend--you won't regret it.

I assumed you meant blue smoke.  White smoke & carbon buildup sounds
like you're too rich.  Maybe your choke is stuck ON.  The service
manual (Files section) describes how to remove it & test.

--- In yerfdoggx150@yahoogroups.com, jerry smith <spinningcain@...>
wrote:
>
> ya I pulled the head off last night and theres a whole lot of
carbon buildup on the face of the piston and the valve chamber I
might try and clean everything up and reinstall still cant figure out
why its so carboned up but maybe thats causing the white
smoke?..............thanks for the reply.....the rings look
good.......thanks.......jerry
>
> guy48065 <guy48065@...> wrote:  You could contact
> http://www.bajamotorsports.net/
> the Dune 150 uses the same motor.  Just about any GY6 150cc in any
> buggy will interchange.  Get one with reverse and you're BETTER
than
> new!
> Sometimes they show up on eBay.
> I'm sure a ring job would be much cheaper than a whole engine.
Don't
> know why you would suddenly start burning oil...Is your air filter
> intact?
>
> --- In yerfdoggx150@yahoogroups.com, "braveskckass"
> <spinningcain@> wrote:
> >
> > will my sons yerf started burning oil all the sudden today now
its
> > blowing smoke and using oil real fast guees it needs rebuilt its
> just
> > so sudden just a couple of days ago it was running great anyone
> know a
> > good place to get a howit replacement motor?.........Jerry
> >
>
>
>
>
>
>
>
>   SPONSORED LINKS
>         Auto racing seat   Auto racing school   Auto racing
ticket     Auto racing safety equipment   Auto racing helmet   Auto
racing flag
>
> ---------------------------------
>   YAHOO! GROUPS LINKS
>
>
>     Visit your group "yerfdoggx150" on the web.
>
>     To unsubscribe from this group, send an email to:
>  yerfdoggx150-unsubscribe@yahoogroups.com
>
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> ---------------------------------
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

New photos posted in "Airplanes Dawg Trails" and of course "New
Photos" area on the front page! My "REVOLT" trip ended in disaster.
And I now have 160.5 hrs. overtime this year! Lucky me! Anyways-miss
all of ya! Hope you enjoy the pics. This is the daughter that wheelies
the Manco! Finally got her picture up. Soon after these were taken
last weekend she bent my right front spindle. As it was her birthday
sunday; I didnt bend her! My fault for letting her ride my Kart when
she has her own! Notice the forest now has leaves!    Jim

hey guys just wanted to let you know that i found a crack on my
supension box. right above the a arms where the shock meets the "box"
is a good size crack. also i am thinkin about welding the entire
supension box ot the frame...sound good?

ya I pulled the head off last night and theres a whole lot of carbon buildup on
the face of the piston and the valve chamber I might try and clean everything up
and reinstall still cant figure out why its so carboned up but maybe thats
causing the white smoke?..............thanks for the reply.....the rings look
good.......thanks.......jerry

guy48065 <guy48065@...> wrote:  You could contact
http://www.bajamotorsports.net/
the Dune 150 uses the same motor.  Just about any GY6 150cc in any
buggy will interchange.  Get one with reverse and you're BETTER than
new!
Sometimes they show up on eBay.
I'm sure a ring job would be much cheaper than a whole engine. Don't
know why you would suddenly start burning oil...Is your air filter
intact?

--- In yerfdoggx150@yahoogroups.com, "braveskckass"
<spinningcain@...> wrote:
>
> will my sons yerf started burning oil all the sudden today now its
> blowing smoke and using oil real fast guees it needs rebuilt its
just
> so sudden just a couple of days ago it was running great anyone
know a
> good place to get a howit replacement motor?.........Jerry
>







   SPONSORED LINKS
         Auto racing seat   Auto racing school   Auto racing ticket     Auto
racing safety equipment   Auto racing helmet   Auto racing flag

---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





[Non-text portions of this message have been removed]

You could contact
http://www.bajamotorsports.net/
the Dune 150 uses the same motor.  Just about any GY6 150cc in any
buggy will interchange.  Get one with reverse and you're BETTER than
new!
Sometimes they show up on eBay.
I'm sure a ring job would be much cheaper than a whole engine. Don't
know why you would suddenly start burning oil...Is your air filter
intact?

--- In yerfdoggx150@yahoogroups.com, "braveskckass"
<spinningcain@...> wrote:
>
> will my sons yerf started burning oil all the sudden today now its
> blowing smoke and using oil real fast guees it needs rebuilt its
just
> so sudden just a couple of days ago it was running great anyone
know a
> good place to get a howit replacement motor?.........Jerry
>

Our Dog works great.  Took it for a spin around the neighborhood, {just the
hubby and I}, got a few nasty looks from the "Gladys Kravitz's" of our
neighborhood.  But works great now! DT

-------------- Original message --------------
From: Thetunisons@...

> I did:) and thank you for the info on the yerfernet. I found
> Erik@bajamotorsports. He has a few of the parts leftover that the company
> bought back from Pep Boys when Yerf dog went under. Good price too! Bought a
> whole lot! Ended up getting the engine mount welded over at Meineke? brakes.
> Did a good job. Just getting the chain back on as we speak. I'll let you know
> if this works. DT
>
> -------------- Original message --------------
> From: Dan Neuenswander
> lol, wow, you are rough on that poor yerf ! As soon as I get home I'll check
> mine out and get back with ya. btw, did you ever get the rear shocks ?
>
> debbie_tunison wrote: Broke the upper right engine
> mount, any ideas? weld? new one? Thanks
> DT
>
>
>
>
>
>
> SPONSORED LINKS
> Auto racing shoes Auto racing apparel Auto racing flag Auto
> racing ticket Auto racing helmet Auto racing safety equipment
>
> ---------------------------------
> YAHOO! GROUPS LINKS
>
>
> Visit your group "yerfdoggx150" on the web.
>
> To unsubscribe from this group, send an email to:
> yerfdoggx150-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ---------------------------------
>
>
>
>
>
> ---------------------------------
> How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call rates.
>
> [Non-text portions of this message have been removed]
>
>
>
> SPONSORED LINKS Auto racing helmet Auto racing poster Auto racing safety
> equipment
> Auto racing apparel Auto racing shoes Auto racing flag
>
>
>
> YAHOO! GROUPS LINKS
>
> Visit your group "yerfdoggx150" on the web.
>
> To unsubscribe from this group, send an email to:
> yerfdoggx150-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

[Non-text portions of this message have been removed]

I did:) and thank you for the info on the yerfernet.  I found
Erik@bajamotorsports.  He has a few of the parts leftover that the company
bought back from Pep Boys when Yerf dog went under.  Good price too!  Bought a
whole lot!  Ended up getting the engine mount welded over at Meineke? brakes. 
Did a good job.  Just getting the chain back on as we speak.  I'll let you know
if this works.  DT

-------------- Original message --------------
From: Dan Neuenswander <penny99_92883@...>
lol, wow, you are rough on that poor yerf ! As soon as I get home I'll check
mine out and get back with ya. btw, did you ever get the rear shocks ?

debbie_tunison <Thetunisons@...> wrote:  Broke the upper right engine
mount, any ideas?  weld? new  one? Thanks
DT






   SPONSORED LINKS
         Auto racing shoes   Auto racing apparel   Auto racing flag     Auto
racing ticket   Auto racing helmet   Auto racing safety equipment

---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

[Non-text portions of this message have been removed]



SPONSORED LINKS Auto racing helmet Auto racing poster Auto racing safety
equipment
Auto racing apparel Auto racing shoes Auto racing flag



YAHOO! GROUPS LINKS

  Visit your group "yerfdoggx150" on the web.

  To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

lol, wow, you are rough on that poor yerf ! As soon as I get home I'll check
mine out and get back with ya. btw, did you ever get the rear shocks ?

debbie_tunison <Thetunisons@...> wrote:  Broke the upper right engine
mount, any ideas?  weld? new  one? Thanks
DT






   SPONSORED LINKS
         Auto racing shoes   Auto racing apparel   Auto racing flag     Auto
racing ticket   Auto racing helmet   Auto racing safety equipment

---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

[Non-text portions of this message have been removed]

Broke the upper right engine mount, any ideas?  weld? new  one? Thanks
DT

i think i messed up the tie rod on the dog. whenever i turn th right
side tire  move all over the place any ideas?

will my sons yerf started burning oil all the sudden today now its
blowing smoke and using oil real fast guees it needs rebuilt its just
so sudden just a couple of days ago it was running great anyone know a
good place to get a howit replacement motor?.........Jerry

Purchased 3206 in December 2003 Serial #96917. Have less than 25 hours on kart.
One oil change. New spindles and A-arms ready to bolt on. Only mod was extra
roll bar padding from Summit. Ran fine last time kids rode it, but sat up for
about a year and it will not crank now. It has always been garaged. The boys
don't like working on the kart with me and if I am working by myself I'd rather
be wrenching on my Vette.

Just bought 2 horses for the boys so the kart needs to go. Advertised locally
for $500. Would consider trades involving horse tack in good shape. Located in
Taft, TN 38488 which is just north of Huntsville, AL.

Ya'll know more about these karts than I do. Send me an email if your
interested.

Keith

[Non-text portions of this message have been removed]

Im here everyday

nick <teenage_riot31@...> wrote:  I'm alive!! so is the Dawg!! she got her
new chain tensioner and i
ordered the hubs and rims for the front! doggy is gonna haul when i
get all of the parts. took her out for a spin yesrterday and got
buried a few times. im really considering a atv sized wicnch. that
would put a little wieght on the front whcih would make it turn even
better, right? still would be nice to have. nick



--- In yerfdoggx150@yahoogroups.com, "planepower2004"
<planepower2004@...> wrote:
>
> --- I'am not dead! Just over 150hr. of overtime already this year
and
> not much time to play! Who else here is alive?
>                   "Wish I was walking my Dawg right now"    Jim
>
>
>
>
>
> In yerfdoggx150@yahoogroups.com, "Bill Underwood" <lbunder@> wrote:
> >
> > Is this group dead? have many issues and answers to questions.
> >
>







---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





[Non-text portions of this message have been removed]

I'm alive!! so is the Dawg!! she got her new chain tensioner and i
ordered the hubs and rims for the front! doggy is gonna haul when i
get all of the parts. took her out for a spin yesrterday and got
buried a few times. im really considering a atv sized wicnch. that
would put a little wieght on the front whcih would make it turn even
better, right? still would be nice to have. nick



--- In yerfdoggx150@yahoogroups.com, "planepower2004"
<planepower2004@...> wrote:
>
> --- I'am not dead! Just over 150hr. of overtime already this year
and
> not much time to play! Who else here is alive?
>                   "Wish I was walking my Dawg right now"    Jim
>
>
>
>
>
> In yerfdoggx150@yahoogroups.com, "Bill Underwood" <lbunder@> wrote:
> >
> > Is this group dead? have many issues and answers to questions.
> >
>

--- I'am not dead! Just over 150hr. of overtime already this year and
not much time to play! Who else here is alive?
                   "Wish I was walking my Dawg right now"    Jim





In yerfdoggx150@yahoogroups.com, "Bill Underwood" <lbunder@...> wrote:
>
> Is this group dead? have many issues and answers to questions.
>

Is this group dead? have many issues and answers to questions.

I had an issue and took my carb off and cleaned 5 times still had issues ended
up that my valves were way tight. As soon as i adjusted them it ran great. Might
not have anything to do with your issue but worth a shot if yours have not been
adjusted........Jerry

smilninside <happinesspending@...> wrote:  OK gentlemen,
float stuck, took apart fixed stuck float, adjusted float to be
parallell with base of carb. (somebody had pictures) cleaned carb jets
and all with gum out, soaked in gumout, sprayed with gumout. New plug,
new fuel filter, no air cleaner, barely starts, does not hold idle and
sputters when stepping on gas.  I have had this carb on and off 100
times now.  Please somebody save me!!!!!






   SPONSORED LINKS
         Auto racing seat   Auto racing apparel   Auto racing flag     Auto
racing ticket   Auto racing school   Auto racing safety equipment

---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





[Non-text portions of this message have been removed]

OK before you buy a new carb check your intake manifold for any rips or holes
because even the smallest hole will result in a vaccum leak thats what happend
to mine, it happens when the intake gets oil on it and it gets soft and rips
when you move the carb around. I fixed mine by sealing it with 100% pure
silicone and now it is still going strong.

smilninside <happinesspending@...> wrote:  OK gentlemen,
float stuck, took apart fixed stuck float, adjusted float to be
parallell with base of carb. (somebody had pictures) cleaned carb jets
and all with gum out, soaked in gumout, sprayed with gumout. New plug,
new fuel filter, no air cleaner, barely starts, does not hold idle and
sputters when stepping on gas.  I have had this carb on and off 100
times now.  Please somebody save me!!!!!






   SPONSORED LINKS
         Auto racing seat   Auto racing apparel   Auto racing flag     Auto
racing ticket   Auto racing school   Auto racing safety equipment

---------------------------------
   YAHOO! GROUPS LINKS


     Visit your group "yerfdoggx150" on the web.

     To unsubscribe from this group, send an email to:
  yerfdoggx150-unsubscribe@yahoogroups.com

     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





[Non-text portions of this message have been removed]

Get a new carb at awesomebuggies.com


[Non-text portions of this message have been removed]

OK gentlemen,
float stuck, took apart fixed stuck float, adjusted float to be
parallell with base of carb. (somebody had pictures) cleaned carb jets
and all with gum out, soaked in gumout, sprayed with gumout. New plug,
new fuel filter, no air cleaner, barely starts, does not hold idle and
sputters when stepping on gas.  I have had this carb on and off 100
times now.  Please somebody save me!!!!!

are you still in the group? i saw your photos and i noticed the awsome
pipe you have! the picture caption said it was a kpx performance pipe?
where did you find this? i have been seaching for it all night and
been having no luck. cant you tell me where i can get one? thanks a
lot nick.