If the hole patterns are the same, why not swap sides with the seats. With the bad seat on the passenger side maybe you will be able to use the bolt thru the...
Hmmm then I could have like a ejection seat for the passenger, now that is something to consider... get the wife to sit in there... make a hard left turn. ...
I just found out that I have to sell my house and I am needing funds to help reduce my debt/Income ratio. As a result Im going to sell my 1.4 year old yerf. It...
I have the 3209. I have also the Twister. Both are cold-blooded as heck. They take forever to start. I did do the manual choke mod to my 3209 and there was...
- Chris, how cold is it where you live right now? Mine has always started fast unless its cold out. After sitting for a couple weeks it takes a few more...
I am in Texas, it is 90-100 degrees now. When you say something wrong with the circuit, you mean the idle or low speed circuit, like a clogged jet? Chris ... ...
Yes; idle curcuit,choke curcuit, 1 of the starter lockouts; one of the curcuits these Yerfs have that can prohibit or inhibit proper starting. Havent heard to...
Have you cleaned the carb? Mine wouldn't start Saturday and I ride fairly often. A carb cleaning primer for the noobs: Remove the 2 10mm nuts from intake....
Well, as I reported on fathers day the rear axle drivers side broke at the traditional spot shown on our site webpage. It was welded and has held since. Today...
-Hey T, If they're $120.00 now it sounds as if maybe the price came down. I heard $140.00 last time on here. I wouldnt pay more $50.00 for one knowing it would...
Just curious has a petition been started of everyone that has had a broken axle. If so you can get a lawyer to probably write up a statement with the signed...
my biggest prob now is getting the proper spindle replaced. It has been almost 2 months since I originally ordered I will attach a copy of letter I SENT TO...
love this idea lets make it so!!! ______________________________________________________ Yahoo! for Good Watch the Hurricane Katrina Shelter From The Storm...
-Dont know of any or how to effectively submit one,;but I would certainly feel justified having one or being part of such! I'll sign it Will. Start it if you...
-T, thanks for the sunday afternoon chuckles.(story) Sorry them b- tards are giving ya wrong parts. Good luck with them. Can you heat and straighten the old...
I have an "06" hammer head II twister with a 150cc 14 or 15hp does anyone know how to get a little more out of the motor???? Keith D. Ress [Non-text portions...
Can you tell me where on the web page? what section thanks Keith D. Ress ... From: hopsterguy To: yerfdoggx150@yahoogroups.com Sent: Sunday, September 11,...
Be careful to believe that it is 14hp first of all, it is the same motor in the yerf who specs it at 7.8hp, but you can by a performance pipe, jets and air...
That makes me want to kick some Yerf dog but! They are on the way out. Many law suits pending! Big T <trev_hoser69@...> wrote:my biggest prob now is...
I remember you said there is a Web Page with the mod kits do you have it? I've seen the yerf Dogs that state that they have 7hp. But, I've seen several...
Follow the forum link, and then you should see sections for engines and mods. Lots and lots of info on that site. Use the search function, or post a new...
There are TONS of things that can be done to increase performance on these engines. New intake, New pipe, or open up the stock pipe. After that, rejet. After...
Also, keep this in mind. In 2005 Twister updated their engine. They have a new head design with cleaner porting. They have better exhaust. They have a "hotter"...
www.eastsidems.com www.bladeatv.com (see performance parts section) www.miamimoto.com (cvt tuning stuff... look for gy6 stuff... btw, their belts don't seem...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
