k i have a modified gy6 150 i installed the stroker crank and a big bore kit the
larger carb the performance exhast a performance cam with spring and a 114 jet a
racing clutch performance variator and a yellow spring in the drivin clutch now
it ran realy good and strong on the trails and the mud but here is the problem
my youngest boy took it out and i had to tow it back when i got it home and was
able to get it going smoke just pours out the exhaust within 30 seconds it will
smoke you right out of the garage it stars normaly revs good now when i checked
to oil before starting it it was barly on the stick so i serviced it now i have
the smoke this build has about 70 hours on the build it dosent start smoking
right away it take about 10 or 15 seconds it makes me think a problem with head
but im not sure

--- On Sun, 10/18/09, dave taylor <taylorteamracing@...> wrote:


From: dave taylor <taylorteamracing@...>
Subject: Re: [yerfdoggx150] Re: drive belt
To: yerfdoggx150@yahoogroups.com
Date: Sunday, October 18, 2009, 7:56 PM


 



what i just experianced on mine is the drivin clutch nut backed off and it just
screwed up the clutch timing it would start unless the wheels was off the ground
onces i took the clutch apart ( be carefull allot of tension ) i put it all back
together and dunt dunt daaaaa it worked fine

--- On Sun, 10/18/09, ss454_1972 <ss454_1972@yahoo. com> wrote:

From: ss454_1972 <ss454_1972@yahoo. com>
Subject: [yerfdoggx150] Re: drive belt
To: yerfdoggx150@ yahoogroups. com
Date: Sunday, October 18, 2009, 5:50 PM

 

it wont hardley idle there is way to much tension on the belt if I pick up the
back end it starts spining the tires what is wrong??

--- In yerfdoggx150@ yahoogroups. com, "TravisC" <travis@...> wrote:
>
> 743-20-30 is the correct belt. The CVT drive is designed to ride the belt
tight without any slip, however a turned roller may cause problems. Let us know
if you experience any problems getting the kart going from a stop.
>
> Travis
>
>
> --- In yerfdoggx150@ yahoogroups. com, "ss454_1972" <ss454_1972@ > wrote:
> >
> > Hi we have a yerf dog cart just like the one on the home page I got a new
belt 743x20x30 is this the right one it seems very tight does anybody know what
belt sixe it should be
> >
>

[Non-text portions of this message have been removed]



















[Non-text portions of this message have been removed]