In my Y50 I´m using a cloud nine too, and it´s works great. This shock haven´t got lockout, but have a Rapid Compression Adjuster to take the compression...
some shocks work great with the original hardware...... I got the manitou swinger 4 way air on my Y5 with some modifications to the original fox spacers, had...
Hi! I've got my used YSL last week, but unfortunately overtorqued one of the screws on the stem. So the lightweight aluminium of the threaded hole got damaged...
Hi Ed. Just replaced my old Stratos pro recently with a Stratos xc which i found unused on ebay. What a difference !! the bobing is gone and the feel of my...
I agree as well. I replaced my front shocks with the Marzocchi EXR pro 110mm, and just that changed my frames geometry considerably. gave it more of a...
For those of us who want to keep the bikes original, most of the parts come up on the U.S eBay from time to time. The Icon stem used on the YSL's was also used...
Possibility is that the number is just a series/batch number (treks record for warranty purposes)Â Or a number determining style (length/rise/steer tube...
Hello to all!!! I'm learning about my trek Y 22 and I have a question for you. The bike weighs 20lbs and I want to install a new front suspention...
hi there. i'm listing my y-22's stem and bar ends on ebay (item # 290237401311). i'm replacing my y's handle bar and stem with carbon since i replaced my front...
hi there. i'm listing my y-22's stem and bar ends on ebay (item # 290237401311). i'm replacing my y's handle bar and stem with carbon since i replaced my front...
I replaced my 1997 Y-11 Indy shock with a 2006(ish) Tora. The Tora had 120mm travel, which is more than the Indy. At 1st the different geometry felt weird...
I'm not sure how you could have a 20lb Y bike. Back then Y33 with XTR is around 24.5 lb. 20lb is really Hartail territory but if you do have a 20lb Y bike,...
Greetings! I have a 1998 Y5 with the original Shimano hardware (STX derailleur and Deore LX shifter). My problem is that I can shift from the small to the ...
Sounds like the cable just needs to be tightened. There's an adjuster for that on the shifter; where the cable goes into the shifter you can screw the sleeve ...
... Your shifter is shot. There's a tiny plastic, stepped cog inside the shifter mechanism that rounds over on the big ring step. I know this because the...
The shifter may be shot, but more likely is excessive cable length. Try shortening it, and loosening the upper limit screw, before writing off the shifter. ......
I am going to sell my 1998 mint condition Y22 frame and URT as a combo. Please note that there will be no components sold with the bike...just the frame and...
I recently unearthed from Storage my 1997 Y33 and want to pass it on to someone who will appreciate it. I do not have pictures yet but they are coming. I raced...
Hi Philip I am very interested in the bike, I do not know what kind of offers you have got but I live in Sacramento CA and was wondering if you are far from...
hi, you have the wrong guy, i'm not selling a bike.... good luck ... From: Jack Bourgeois <cactus459@...> To: trekybikes@yahoogroups.com Sent: Monday,...
Jack - I am having an open house/ gear sale this upcoming Holiday weekend. Sat/ sun 11-4 My address is 1346 merced St. Richmond, Ca 94804. I am right off the...
Hey everyone. I'm new to this forum, and new to Y bikes. I just got one recently for a great deal through local classifieds. It's been repainted- and looks...
The URT gives a clue. The rectangular section URT with replaceable derailleur hanger means 1997. Pre 96 the hanger was not replaceable; from 98 on all URT's...
Here is a little update on my Y33 I am parting with. This bike was my spare that never got to be used as the first one had no issues, so less than 50 miles...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
