Does anybody run a wider tire in front? I was at the bike shop and they mentioned that some people run a wider tire in front than in the rear. They said that...
I run 2.2" front and back, but I run low air pressure in the front for more traction. If I run the front harder I biff it on the edge or ruts and bounce too...
I personally run a 2.5" in the front, and the max of 2.3" in the back.......the back looks a bit scary due to clearance issues, but it does fit, and works...
hi. i have a y-22 nude frame that i bought from a co-worker. got spin and spinergy wheelsets. any tips on fabricating a rotor attachment to these wheelsets? ...
I don't know those wheelsets but remember that many wheels built around non-disc hubs are not laced to take the large torsional loads from a disc brake acting...
I remember reading somewhere that you could send the wheels back to Spinergy to be retrofit to accept disc rotors at a cost off course. Call them up and see...
I am hoping to replace my front fork and maybe headset, and get some disc brakes, but I was hoping for some information or suggestions. I would like a front...
All, Where is a good place to get replacement spokes for our bikes? I have 1998 Y-33 and have just broken a spoke and some others look questionable. Another...
I have always been able to get my replacement spokes from Cane Creek directly. You can also send your wheel to them and they will service it. Phil Philip...
In case anyone is interested, I received this email: "After posting my Y3 for apparently too little, I was amazed at the response, I did more research and...
Thanks for the info. I just talked to by bike mechanic friend and we looked at my rims and most spokes need replaced and the rim is concave from wear by the...
Hello, I am currently into this situation myself. I live in Reno, NV and winter is setting in, so it is time for me to tear apart my Y3. I bought an aluminum...
For my Y-33 renovation project, I found a 80mm 2008 Marzocchi MX Pro LO (Lock Out) Fork online for under $200. I noted that the 100mm versions were more...
Fun show. I wanted to use handcuffs to lock up my Y-22 'til someone told me they all use the same key ... ooops! For the link challenged, here's a shorter link...
hi, I'm posting my Spin Wheelset at craigslist (Orange county / LAX). Comes with WTB nanoraptor tires and Shimano HG 8 spd cassette. No cracks or major...
I am in need of a Spinergy Rev x Roks four spoke front wheel. If anyone has one or knows of somewhere I can find one please let me know. I am currently...
hi i do have 1 for sell... but in singapore.. where u from. how much u looking at? tom ... Yahoo! Toolbar is now powered with Search Assist.Download it now! ...
I am in Pennsylvania, USA. Do you have any pictures of the wheel? Also, what condition is it in? What I am looking to spend depends on condition. Please let me...
condition is 9/10. very new u may surprised i can send u the photo, what is your email. ... Try cool new skins, plus more space for friends. Download...
I have posted some new pictures of my "Pacific Blue" build. They are in the "Tom Y-11" folder. Anyone with comments or suggestions let me know. This bike was...
I don't think anyone makes a complete kit. I would recommend taking all the pictures you can of other y33's and then giving those to a graphic shop to...
Hi again. What about a complete new pivot bushing? The "crick-crick" noises of my 97 Y-33 suggest me that it's tame to change! Anybody knows here could I find...
Hey manutreky33, Your first topic about Y-33 decals is one that I have considered several times. I have two mint Y-33's, so no need for a decal set unless one...
I already replaced the bushings in my Y-3, and my Gary Fisher Joshua F3. Got them from a local Trek dealer that had a hard time getting part numbers for me,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
