Hi, it's Aluminum Johnny,
Yes I am still alive; and still recumbent.
Parts needs; Go to:
http://www.novacycles.com/catalog/
The owner, Lon, is a great guy for 1 or 100 parts.
AJ
-----Original Message-----
From: recumbentsmn@yahoogroups.com [mailto:recumbentsmn@yahoogroups.com]
On Behalf Of Tim Dunsworth
Sent: Monday, December 05, 2005 10:30 AM
To: bschmidt613; recumbentsmn@yahoogroups.com
Subject: Re: [recumbentsmn] Parts needed to build a recumbent


If you need it already threaded (ie. no local bike or machine shop that
could face and thread it for you) then your best bet may be the Gaerlan
company. They have a pre-threaded bottom bracket shell for $8.95 mail
order. The standard size is 68 mm wide and English threaded (the main
variation is in the length of the spindle and the type of BB bearings
used, not in the shell itself), which seems to be all they offer. For
more info or to order one, go to: www.gaerlan.com/bikeparts/ Tim
Dunsworth

>>> "bschmidt613" <bschmidt613@...> 12/04/05 9:02 PM >>>
Hi,
Don't know where else to turn, so I thought I's try this group. I'm
looking for the threaded tube that the crank goes thru, to use in
building a recumbent. I don't know how many different sizes there are
either. Any help is appreciated.









MNHPVA & RECUMBENTS MINNESOTA
Home Page: http://www.mnhpva.org
Group Page: http://groups.yahoo.com/group/RecumbentsMN
Post message: mailto:RecumbentsMN@yahoogroups.com
To Unsubscribe: send a blank message to:
recumbentsmn-unsubscribe@yahoogroups.com
Yahoo! Groups Links









MNHPVA & RECUMBENTS MINNESOTA
Home Page: http://www.mnhpva.org
Group Page: http://groups.yahoo.com/group/RecumbentsMN
Post message: mailto:RecumbentsMN@yahoogroups.com
To Unsubscribe: send a blank message to:
recumbentsmn-unsubscribe@yahoogroups.com
Yahoo! Groups Links