i own a 2000 model ct110. it runs well but it now has a bad vibration i the motor somewhere.it has got me stuffed.help is needed badly. yours cincerely Ross...
Hello, I have a 10/93 ct110 bought from auction 5 yrs ago, it is 12v, the CDI is Shindengen CF 416D. I have reduced the wiring to postie racer, 5 wires from...
how can I test a shindengen CDI unit CF416D to see if it is working? recently stripped the electrics to postie racer, in the process of snipping wires and...
how can I test a shindengen CDI unit CF416D to see if it is working? recently stripped the electrics to postie racer, in the process of snipping wires and...
Hi, Welcome to the group. So it sounds to me like the CDI is working... have you checked the coil? You can Test by connecting +ve to the coil and taking it...
Hi just read your message again. Sorry I incorrectly understood it the first time. The CDI is NOT working by the sound of it. The wire going to the coil...
-Hi Ross, You haven't mentioned if there is any noise with this vibration, if there is no noise check engine mounts for tightness also swing arm mount through...
--HI , I think Warrens on the right track Check the wiring conections and that every thing that should be earthed is and things that shouln't aren't, let us...
-Hi , also check for continuity in kill switch circuit an earthing I'll have a look in the manual for testing CDI unit Noel -- In postiebikes@yahoogroups.com,...
Sounds like mine... Mine got run by someone who borrowed it and ran it a bit low and hot all day, which made it have slight bottom end noise. Then about a...
my suggestion is that the bottom end bearing is going catch it before it locks up and destroys ya motor .if ya can take the head and barrel of it and grab the...
if u have pulled put wires check for a yellow and black wire and check to see if it is conected to the coil under the tnak this has made drama for me before ...
Brings back memories of my '75 CD90Z I was told to measure the oil with the dipstick screwed down, after some months, I was told NO just rest it unscrewed and...
Thanks for the replies, I finally have a spark, found slivers of iron on the pulse generator shorting out the wires. The magnet in it attracted the iron and...
Everytime I ride my postie bike and it rains it just cuts out.. when I put it in gear as soon as I touch the throttle it just dies :S but whilst riding its...
G'Day Just putting my postie back together after a full strip down and paint,need help with a rewiring diagram,removed all lights,dash,key start,wire...
Hi, Check out http://sports.groups.yahoo.com/group/postiebikes/files/ for a range of wiring diagrams. Or http://www.postiebikes.com/specs.htm for minimal...
That's pretty good! What size are you? i.e. age, height and weight. Also what mods do you have to your bike? i.e. gearing i.e. front and back sprocket size...
Hi Could anyone tell me where to find/ buy new gaskets in the Sydney area? I need most of the gaskets replaced as my engine is being rebuilt. I spoke to one...
Honda are U a monkey or what unless U make yr own which is not that hard just remember the old sticks in the sticks with a piece of gasket paper a pocket knife...
--Hi Toby, I am pretty sure that a pre 98' gasket kit will will have all the gaskets you will need, I can't think what they have changed on the late model...
