I have a XL/SL125 k1 front end and fork clamps. The only change that I needed to make to mount the steering head was to take a couple of mm's off the bottom of...
Good to hear you all had a great day :) I would have much rather been at Brightside being lapped by you guys than moving house :( See you all next race .......
Hi there,Just looking for some advice.I have just transfered the motor from a 1979 C90 into a CT110 frame.I have removed all lights,wiring,battery etc as it is...
I have a ct110 that i want to have bored out to 125cc, race cam, shaved head, new bottom end bearings, timing chain and all rollers, and need some work on 1st...
Hi there,Just looking for some advice.I have just transfered the motor from a 1979 C90 into aCT110 frame.Ihave removed all lights,wiring,battery etc as it is...
G'day you lot! Forgive the dual post here & on the CT90 group!! Havn't posted for quite awhile, been busy buying a house & it's slowed me up on the '90. ...
Hi, have just replaced the clutch plates and it is not working as smoothly as before. At tickover,engaging first is ok and smooth. However, when going to...
--Hi. I think you have the clutch procedure around the wrong way, try anti clockwise till you feel resistance then clockwise 1/8 to 1/4 ,you should be able to...
Hi Bruce, If you go to the postie bikes home page , under specs you will find some wiring diag. for posties running without batteries that may help. post again...
--Hi I'm in Sydney so can't recomend any body to do the machine work but I use a Tighe cam regrind and he is based in QLD and does a mail back service, You...
While checking out the Honda clone pitboss engine specs,,capacity is listed as 107cc..BUT,,they quote a bore/stroke of 47mm / 41.4mm,,guess what ! any who have...
You're dead right about the pitboss engine, and to find out engine capacity for anything with pistons: For people who don't read maths: Get a calculator. ...
Oh heck, I can't read instructions properly.Yes I was turning it the wrong way. However now I am adjusting it correctly the problem is the same. I can continue...
--Hi , The other thing you may want to check (I had this happen)make sure that the pin on the adjuster ingaged with the hole in the cover when you assembled ??...
Some guy says he can have me fined for riding on his front lawn. So I checked out the laws and it appears there is only an exemption for riding on a footpath...
lol I think I know what you mean, as in a postie who works for Australia Post and rides their bikes? I've been riding postie bikes for 13 years and I ()wn my...
G'day, if you feel that it is dangerous to deliver his mail to his letterbox, for whatever reason, card it all and let him collect it from the LPO. Remember -...
G'day, my reply seems to have gone astray-- "if you feel that it is dangerous to deliver his mail to his letterbox, for whatever reason, card it all and let...
Hi, I picked up a 2001 model postie bike (CT-110) from auction just under a year ago which has been going great except now the speedo needs replacing, the...
Hey Mate I'm a PDC this month we have the average monthly rainfall in a couple of day's with local flooding in the Adelaide Hills and for the last two weeks I...
The latest model I have is a 2000 and the oldest is a 1989, to me the speedo's are the same all the way through. So I say you would be safe in getting one from...
oz post spent millions getting the right for there workers (posties) to ride on any and all nature strips a pesrons lawn that they legally own ends at there...
I wasn't having a "go" at pop..or any other posties,,or postie bike riders,,(actually enjoyed reading the post) it was just a tongue in cheek attempt at...
yeah thats what I reckon, but I downloaded the official transport thingy and it was very vague on what is a nature strip and what is a footpath... using...
Hey, Man! A supercharger on a postie is incredibly wicked crazy sweet awesome. Run it off of alcohol and break somthin right quick. Have any of you guys done a...
