Well the group has had several new members join lately so lets hear
from You new guys and some of the old members allso!
George

Well the trike is dead! We got it mostly togather and tryed it and it
pushed so bad that you couldent drive it We were afrade it would push
some and had a "plan B" I made a floteig wheel hub for the right rear
wheel so that it would only have 1 drive wheel insted of a live axel.
That seemd like it was going to work great pushing it around in the
garage, but then we took it outside and tryed to ride it and had
another problem, It drove great as long as you were coasting, but when
you hit the gas it only wanted to go right! You couldent even hold it
stright while giveing it gas!
the only thing to fix it would be to rake the front fork more, and that
would make it longer than We wanted!
So Now it has been cut up! the minibike part has been cut off and We
are going back to what We started to build in the first place, a
barstool racer.
I will post some pictures of it if there is any interest.
Later
George

Hi
Theres not been much going on in the group lately. I havent done much
to report on My buggy till today, I made an intake manafold for the
engine this week and today I put it & the carb on and tryed the engine!
It runs GREAT! The carb that I got off ebay seems like it is going to
be just what this honda wanted! Other than that the only thing I have
acomplished is to get a little more tubeing for the rollcage, I have
about 20 feet of it now but I need around 90 ft. of it and the longest
pice I have is about 6 ft. and I have to have at least 1 that is 13
feet long to make the main loop of the cage out of! I could weld 2
togather but I would rather not do that! I have found a sorce for 1in x
11g. dom. at a good price but they can only suply 10ft. lenths and I
would rather 13g. but I might just buy some of the 11g. if I dont find
another sorce!
Well I will end this for now and let yall know when I make some more
headway!
George

Merry Christmass to all and to all a good night!!

schd 40 NOT ADVISABLE bends easy and can break
conduit will just fold up
us at least .090 wall steel 1 inch at a min
--- George <gphunt2005@...> wrote:

> Hi All
> I am still looking for roll cage material for My
> buggy. I was wondering
> what others have used for theres? I have looked at
> about everything but
> the only thing that I have found that is close to
> being affordable is
> sech.40 black iron pipe and it is a lot heaver than
> I would like to
> use. I looked for sech.20 black iron but no one in
> My area stocks it.I
> have allso looked at electrical conduit but I dont
> think it would be
> strong enough to offer much protection without
> useing a lot more of it
> than other pipe or tubeing. Has any one used conduit
> and if so would
> You recomend it?
> Does anyone have any ideas on what else there is
> readily available?
> I am keeping My eye out at the local scrap yard but
> not haveing any
> luck.
> Thanks
> George Hunt
>
>

Hi All
I am still looking for roll cage material for My buggy. I was wondering
what others have used for theres? I have looked at about everything but
the only thing that I have found that is close to being affordable is
sech.40 black iron pipe and it is a lot heaver than I would like to
use. I looked for sech.20 black iron but no one in My area stocks it.I
have allso looked at electrical conduit but I dont think it would be
strong enough to offer much protection without useing a lot more of it
than other pipe or tubeing. Has any one used conduit and if so would
You recomend it?
Does anyone have any ideas on what else there is readily available?
I am keeping My eye out at the local scrap yard but not haveing any
luck.
Thanks
George Hunt

Hi All
I have finely made up My mind on My rear syspinsion and trailing arms
are what I decided to go with. These will be easer to make, Take less
metal and everything fits into the area much better!
I had a sleepless night last night so I started drawing and meshureing
and desined the trailing arms there mounts and the mount for the
transaxel! I allso did a little drawing & thinking about the brakes. I
am going to have 2 discks with calipers from the front of a suzuki
streetbike and I am allso going to use a cheep mechanical calliper on 1
or the roters for a parking break.
Later
George


>The rear "A" arms will be made
> out of the 1in tubeing and the cage will be 1.250 tubeing, allthough
I
> am now thinking about useing tralling arms in the back insted of "A"
> armes, Any toughts on this from anyone??

Hi Everyone
I just posted some pictures of a pit trike that I am helping a friend
build. We have been working on this for a while now. We dont get to
work on it verry often but it is allmost finished now! I will post a
couple more pictures when it is finished.
We started out with an old(mid 60s to early 70s) minibike and an
outdated racing go kart frame. The go kart frame was cut at the front
of the seat area. The minibike frame was cut under the seat area and
just in front of the engine mount. The 2 bottom tubes of the minibike
frame were then spred to match the go kart frame width and squared up
and welded to it with the go kart frome upsidedown for more ground
clearance. We took some of the tubeing from the discarded
frame peaces and some new tubeing and extended the top of the
minibike frame to the back of the go kart frame. The engine mount is
made from 3/16 steel plate. We are useing a disc brake setup for a
raceing go kart.
The engine is an early animal overhead valve briggs. We put a raceing
stock class flathead 5hp briggs on it(app.12hp) once for a test run
and it was way to fast! This animal is app.9hp.
We still need to finish the seat, the plywood is cut out We just need
to get some foamrubber for padding and some vinyl for it to finish it.
We are haveing truble with the carb but hopefully We will have that
worked out next week.
Later
George

I bought "A"arms with the balljoints in them on ebay, they are for the
china knokoff of a banshee 4 wheeler, they are well made and look to be
verry strong.The rear axels are something that I couldent think of in
the last post, I got 2 tractor PTO shafts from Surpluss Center, they
come with 2 compleet U Joints each and a slider shaft for $25 each. I
got brakes for the front of a Suzuki street bike off ebay, I got 2
calipers and the mastercylinder. I am going to use these with raceing
go kart roters on the back axel. I thought about doind front brakes but
decided that I wont need them(i hope lol) If the need for front brakes
comes up I can allways add them later.

George


--- In offroadgokarts@yahoogroups.com, Michael <findawg78@...> wrote:
>
> What front suspinsion arms with balljoints are you using? Rear drive
axle brake or are you doing fronts too?

What front suspinsion arms with balljoints are you using? Rear drive axle brake
or are you doing fronts too?




________________________________
From: George <gphunt2005@...>
To: offroadgokarts@yahoogroups.com
Sent: Tuesday, November 25, 2008 12:07:02 PM
Subject: [Off Road GoKarts] Re: Allmost a year


Hi Michael
So far I have gotten the 1x3 box tubeing for the base frame,2
18x8.5x8 rear wheels, 2 15x6.5x8 front wheels, a raceing bucket seat,
all 4 front suspinsion arms with balljointes and 6 grade 8 bolts to
attach them with, Commet 40 series toqurck converter system, 4
sprockets and 10ft. of chain,4 1in.id. ballbearrings, 2 boots for My
rack&pinion, a steeringwheel, a carbarator, a carb kit, 2 3/4x16x6
grade 8 bolts for front axels,4 wheel hubs,20 lugnuts,alu. sheet for
floorboard,2 roals of welding wire,some 3/8 steal plate for transaxel
case, A 4 point raceing seatbelt, And I know there are some more
little things that I cant think of rite now.
I still havent found a good deal on the tubeing for the cage yet. I
might have to brake down and pay reatail price (ouch) for it. Other
than the tubeing and a little more 3/8 steel plate I have most of
what I need to finish buildeing My buggy!
I did some tradeing and got the engine I am going to use over a year
ago and only have about $50 cash in it! It is a mildley modifyed 13
hp Honda GX390 off a minicup car. It should make around 20-25 hp.
Later
George hunt

--- In offroadgokarts@ yahoogroups. com, Michael <findawg78@. ..> wrote:
>
> So what kind of a shopping list did you talley up $400 with so far?
Engine? wheels?
>
>
>
>
> ____________ _________ _________ __
> From: George <gphunt2005@ ...>
> To: offroadgokarts@ yahoogroups. com
> Sent: Wednesday, November 19, 2008 5:46:27 PM
> Subject: [Off Road GoKarts] Re: Allmost a year
>
>
> --- In offroadgokarts@ yahoogroups. com, "remembersammiejenk ins"
> <remembersammiejenk ins@> wrote:
> >
> > Kinda off topic, but this might help you guys. This is my kart
that i
> > built on a budget about 5 years ago. the entire suspension has
been
> > redesigned since, but ill see about getting updates up.
>
> Hi
> I personaly look forward to seeing and hearing about Your redesine
on
> the suspension! I am buildeing My buggy on a budget allso. I have
> bought allmost everything on ebay, even the steel box tubeing for
the
> frame.I got 24 feet of 1x3x.090 tubeing for about $53 includeing
> shipping. So far I have spent about $400 on materals and $500 on
> tooling lol (I had to buy a welder) I know that this is a lot of
money
> but I dont count the tooling in the cost of My buggy because I will
use
> it for years to come on manny other projects. If I can find a deal
on
> some 1 1/4 round tubeing for the cage then I should be able to
finish
> it for around $600!
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>






[Non-text portions of this message have been removed]

Hi Michael
So far I have gotten the 1x3 box tubeing for the base frame,2
18x8.5x8 rear wheels, 2 15x6.5x8 front wheels, a raceing bucket seat,
all 4 front suspinsion arms with balljointes and 6 grade 8 bolts to
attach them with, Commet 40 series toqurck converter system, 4
sprockets and 10ft. of chain,4 1in.id. ballbearrings,2 boots for My
rack&pinion, a steeringwheel,a carbarator, a carb kit, 2 3/4x16x6
grade 8 bolts for front axels,4 wheel hubs,20 lugnuts,alu. sheet for
floorboard,2 roals of welding wire,some 3/8 steal plate for transaxel
case, A 4 point raceing seatbelt, And I know there are some more
little things that I cant think of rite now.
I still havent found a good deal on the tubeing for the cage yet. I
might have to brake down and pay reatail price (ouch) for it. Other
than the tubeing and a little more 3/8 steel plate I have most of
what I need to finish buildeing My buggy!
I did some tradeing and got the engine I am going to use over a year
ago and only have about $50 cash in it! It is a mildley modifyed 13
hp Honda GX390 off a minicup car. It should make around 20-25 hp.
Later
George hunt



--- In offroadgokarts@yahoogroups.com, Michael <findawg78@...> wrote:
>
> So what kind of a shopping list did you talley up $400 with so far?
Engine? wheels?
>
>
>
>
> ________________________________
> From: George <gphunt2005@...>
> To: offroadgokarts@yahoogroups.com
> Sent: Wednesday, November 19, 2008 5:46:27 PM
> Subject: [Off Road GoKarts] Re: Allmost a year
>
>
> --- In offroadgokarts@ yahoogroups. com, "remembersammiejenk ins"
> <remembersammiejenk ins@> wrote:
> >
> > Kinda off topic, but this might help you guys. This is my kart
that i
> > built on a budget about 5 years ago. the entire suspension has
been
> > redesigned since, but ill see about getting updates up.
>
> Hi
> I personaly look forward to seeing and hearing about Your redesine
on
> the suspension! I am buildeing My buggy on a budget allso. I have
> bought allmost everything on ebay, even the steel box tubeing for
the
> frame.I got 24 feet of 1x3x.090 tubeing for about $53 includeing
> shipping. So far I have spent about $400 on materals and $500 on
> tooling lol (I had to buy a welder) I know that this is a lot of
money
> but I dont count the tooling in the cost of My buggy because I will
use
> it for years to come on manny other projects. If I can find a deal
on
> some 1 1/4 round tubeing for the cage then I should be able to
finish
> it for around $600!
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

So what kind of a shopping list did you talley up $400 with so far? Engine?
wheels?




________________________________
From: George <gphunt2005@...>
To: offroadgokarts@yahoogroups.com
Sent: Wednesday, November 19, 2008 5:46:27 PM
Subject: [Off Road GoKarts] Re: Allmost a year


--- In offroadgokarts@ yahoogroups. com, "remembersammiejenk ins"
<remembersammiejenk ins@...> wrote:
>
> Kinda off topic, but this might help you guys. This is my kart that i
> built on a budget about 5 years ago. the entire suspension has been
> redesigned since, but ill see about getting updates up.

Hi
I personaly look forward to seeing and hearing about Your redesine on
the suspension! I am buildeing My buggy on a budget allso. I have
bought allmost everything on ebay, even the steel box tubeing for the
frame.I got 24 feet of 1x3x.090 tubeing for about $53 includeing
shipping. So far I have spent about $400 on materals and $500 on
tooling lol (I had to buy a welder) I know that this is a lot of money
but I dont count the tooling in the cost of My buggy because I will use
it for years to come on manny other projects. If I can find a deal on
some 1 1/4 round tubeing for the cage then I should be able to finish
it for around $600!






[Non-text portions of this message have been removed]

Hello to all of the group members!
I am George Hunt. Mark has just made Me a moderator for the group and
I am going to try to get the group going again! If You havent been to
the group in a while You might be suprised to see that there has been
more messages posted in the past month than in allmost the past 2
years! So PLEASE come back to the group and partisapate in the
discutions and tell us all what You have been up to with Your offroad
go karts!

We have several new members and some of the original members are
allready back onboard!

I have gone through the members list and removed all of the members
that were "bounceing" emails ( this uasually happens because the
member has quit useing or deleeted the yahoo ID that they joined the
group with) Acording to Yahoo this will make the group email faster
for those who recieve group messages in there email! If I deleeted
anyone that still wants to be a member Please rejoin the group with
Your current Yahoo ID and let Me know that You used to be a member
and are rejoining the group, include Your old ID that You used to use
and I will approve Your membership ASAP and the first time You post a
message to the group I will change You to unmoderated!

Ok LETS get things rooling again!
George Hunt

it will be powered by a slightly modifyed honda 13hp minicup
> engine running through a 40 series T.C. drive and a homebuilt F-N-R
> transaxel. I plan to build the trans. case out of steel plate and use
> timeing gears from 5hp brigs engines to achive the reverse and 8to1
> gear reduction for the finel drive snd reverse will have another 2to1
> set in it making it 1/2 the speed of forward!

I have finished My plans for the transaxel! I made a couple of changes
in it, mostley to simplyfy things. I have decided to use a chan and
sprockets for the finel drive and part of reverce, this will eleminate
8 gears and 8 bearings! I had allso not thought much about finel drive
ratio when I posted beore. With 8 to 1 in the transaxel I would have
had way to low of a gear ratio, after doing some reserch and math I
decided that 3 to 1 in the transaxel would be low enough. With the
toqurc converter I will have a low of allmost 9 to 1. I have all of
the gears, sprockets, and chane for the internails ordered I have all
of the bearrings on hand now and part of the steel for the case. I
still need to get part of the shafting and some more plate before for
the case I can start buildeing it though.
I will post pictures when I get started on it.
Later
George

--- In offroadgokarts@yahoogroups.com, "remembersammiejenkins"
<remembersammiejenkins@...> wrote:
>
> Kinda off topic, but this might help you guys. This is my kart that i
> built on a budget about 5 years ago. the entire suspension has been
> redesigned since, but ill see about getting updates up.

Hi
I personaly look forward to seeing and hearing about Your redesine on
the suspension! I am buildeing My buggy on a budget allso. I have
bought allmost everything on ebay, even the steel box tubeing for the
frame.I got 24 feet of 1x3x.090 tubeing for about $53 includeing
shipping. So far I have spent about $400 on materals and $500 on
tooling lol (I had to buy a welder) I know that this is a lot of money
but I dont count the tooling in the cost of My buggy because I will use
it for years to come on manny other projects. If I can find a deal on
some 1 1/4 round tubeing for the cage then I should be able to finish
it for around $600!

Mike
Looks like a lot of fun!! I hope to be haveing fun like that on My
buggy by this spring!
George


--- In offroadgokarts@yahoogroups.com, Mike Collins <collins380@...>
wrote:
>
>
> George if you would like to see the one we built with a 4 wheeler
motor in it  go to youtube and type in 200cc homemade buggyshould be
about 11 videos we have taken just goofin around    Mike C
>
> To: offroadgokarts@...: gphunt2005@...: Fri, 21 Nov 2008 23:07:27
+0000Subject: [Off Road GoKarts] Re: test
>
>
>
> Hi MikeI dont know much about the bandit. I do like its cage and
plan to build My cage something like that. I do not like what I can
see of the suspinsion, I prefer double "A" arms on the front and
either double "A" arms or trailing arms on the back. Mine has
double "A" arms on the front and I am leaning toward trailing arms on
the back for simplsitys sake. allthough I am still concidering
double "A" arms for the back allso. I am going to have to make up my
mind soon! lolLet us know how Your build is going when You get
started!LaterGeorge --- In offroadgokarts@yahoogroups.com, "Michael
Collins" <collins380@> wrote:>> -Hey george just checked out the pics
posted the BANDIT i just bought > plans for one of these exact
buggies how does it run , ride and > handle ? MIke > C -- In >
offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:> >> > >
> Some of My messages still sre not showing up, there is 1 or 2 that
I > > posted 2 or 3 days ago that still do not show?> > I just tryed
on My plans&blueprints group and the message went > through > >
instantly! Is this yahoo screwing up again or have the group settings
> > gone back to moderated?> > George Hunt> > > > > > --- In
offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:> > >> >
> this is just a test, I posted a message 2 days ago and it still is
> > not > > > in the list> > >> >>
>
>
>
>
>
> _________________________________________________________________
> Get more done, have more fun, and stay more connected with Windows
Mobile®.
> http://clk.atdmt.com/MRT/go/119642556/direct/01/
>
> [Non-text portions of this message have been removed]
>

George if you would like to see the one we built with a 4 wheeler motor in it 
go to youtube and type in 200cc homemade buggyshould be about 11 videos we have
taken just goofin around    Mike C

To: offroadgokarts@...: gphunt2005@...: Fri, 21 Nov
2008 23:07:27 +0000Subject: [Off Road GoKarts] Re: test



Hi MikeI dont know much about the bandit. I do like its cage and plan to build
My cage something like that. I do not like what I can see of the suspinsion, I
prefer double "A" arms on the front and either double "A" arms or trailing arms
on the back. Mine has double "A" arms on the front and I am leaning toward
trailing arms on the back for simplsitys sake. allthough I am still concidering
double "A" arms for the back allso. I am going to have to make up my mind soon!
lolLet us know how Your build is going when You get started!LaterGeorge --- In
offroadgokarts@yahoogroups.com, "Michael Collins" <collins380@...> wrote:>> -Hey
george just checked out the pics posted the BANDIT i just bought > plans for one
of these exact buggies how does it run , ride and > handle ? MIke > C -- In >
offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:> >> > > > Some of
My messages still sre not showing up, there is 1 or 2 that I > > posted 2 or 3
days ago that still do not show?> > I just tryed on My plans&blueprints group
and the message went > through > > instantly! Is this yahoo screwing up again or
have the group settings > > gone back to moderated?> > George Hunt> > > > > >
--- In offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:> > >> > >
this is just a test, I posted a message 2 days ago and it still is > > not > > >
in the list> > >> >>





_________________________________________________________________
Get more done, have more fun, and stay more connected with Windows Mobile®.
http://clk.atdmt.com/MRT/go/119642556/direct/01/

[Non-text portions of this message have been removed]

Hi Mike
I dont know much about the bandit. I do like its cage and plan to
build My cage something like that. I do not like what I can see of
the suspinsion, I prefer double "A" arms on the front and either
double "A" arms or trailing arms on the back. Mine has double "A"
arms on the front and I am leaning toward trailing arms on the back
for simplsitys sake. allthough I am still concidering double "A" arms
for the back allso. I am going to have to make up my mind soon! lol

Let us know how Your build is going when You get started!
Later
George


--- In offroadgokarts@yahoogroups.com, "Michael Collins"
<collins380@...> wrote:
>
> -Hey george just checked out  the pics posted the BANDIT  i just
bought
> plans for one of these exact buggies how does it  run , ride and
> handle ? MIke
> C                                                                --
In
> offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:
> >
> >
> > Some of My messages still sre not showing up, there is 1 or 2
that I
> > posted 2 or 3 days ago that still do not show?
> > I just tryed on My plans&blueprints group and the message went
> through
> > instantly! Is this yahoo screwing up again or have the group
settings
> > gone back to moderated?
> > George Hunt
> >
> >
> > --- In offroadgokarts@yahoogroups.com, "George" <gphunt2005@>
wrote:
> > >
> > > this is just a test, I posted a message 2 days ago and it still
is
> > not
> > > in the list
> > >
> >
>

-Hey george just checked out  the pics posted the BANDIT  i just bought
plans for one of these exact buggies how does it  run , ride and
handle ? MIke
C                                                                -- In
offroadgokarts@yahoogroups.com, "George" <gphunt2005@...> wrote:
>
>
> Some of My messages still sre not showing up, there is 1 or 2 that I
> posted 2 or 3 days ago that still do not show?
> I just tryed on My plans&blueprints group and the message went
through
> instantly! Is this yahoo screwing up again or have the group settings
> gone back to moderated?
> George Hunt
>
>
> --- In offroadgokarts@yahoogroups.com, "George" <gphunt2005@> wrote:
> >
> > this is just a test, I posted a message 2 days ago and it still is
> not
> > in the list
> >
>

Some of My messages still sre not showing up, there is 1 or 2 that I
posted 2 or 3 days ago that still do not show?
I just tryed on My plans&blueprints group and the message went through
instantly! Is this yahoo screwing up again or have the group settings
gone back to moderated?
George Hunt


--- In offroadgokarts@yahoogroups.com, "George" <gphunt2005@...> wrote:
>
> this is just a test, I posted a message 2 days ago and it still is
not
> in the list
>

Forgot the URL XD
http://s6.photobucket.com/albums/y232/killatrashcan/GoCart/

--- In offroadgokarts@yahoogroups.com, hesham labib <hshmlabib@...>
wrote:
>
> hi that is hesham from egypt i built a very nice off road go kart
but i dont know what to do next  it is not ezy in egypt
> so can u tell me what to do please
> gratings from egypt
>
>
> --- On Mon, 11/17/08, George <gphunt2005@...> wrote:
>
> From: George <gphunt2005@...>
> Subject: [Off Road GoKarts] Re: Allmost a year
> To: offroadgokarts@yahoogroups.com
> Date: Monday, November 17, 2008, 6:38 AM
>
>
>
>
>
>
> Well I feal like I am beeting a dead horse, but I still think this
> group could make a comeback if only some of the other members would
get
> on hear and try with Me!
> Come on guys I know some of You must be working on something,
wether it
> be a new build or just tweeking what You have allready built! Lets
hear
> from you other gear heads!
> George
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Hi All
I finely got around to takeing some pictures of what I have gotten done
on My buggy and posting them in the photos! Look for the
album "George,s buggy build"
Later
George Hunt

Kinda off topic, but this might help you guys. This is my kart that i
built on a budget about 5 years ago. the entire suspension has been
redesigned since, but ill see about getting updates up.

--- In offroadgokarts@yahoogroups.com, hesham labib <hshmlabib@...>
wrote:
>
> hi that is hesham from egypt i built a very nice off road go kart
but i dont know what to do next  it is not ezy in egypt
> so can u tell me what to do please
> gratings from egypt
>
>
> --- On Mon, 11/17/08, George <gphunt2005@...> wrote:
>
> From: George <gphunt2005@...>
> Subject: [Off Road GoKarts] Re: Allmost a year
> To: offroadgokarts@yahoogroups.com
> Date: Monday, November 17, 2008, 6:38 AM
>
>
>
>
>
>
> Well I feal like I am beeting a dead horse, but I still think this
> group could make a comeback if only some of the other members would
get
> on hear and try with Me!
> Come on guys I know some of You must be working on something,
wether it
> be a new build or just tweeking what You have allready built! Lets
hear
> from you other gear heads!
> George
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

There is several sites listed in the links, Tre them or google "off
road gokart plans" and see what you get. Or You can do like Me and lots
of others have done, desine Your own. You can look at what others have
built to get ideas, then use what You like and dont use what You
dislike to make Your own desine.
George

--- In offroadgokarts@yahoogroups.com, "kareem" <kareem_ali35@...>
wrote:
>
> hay
> i want to buy buggy plan , wher is the best site i can get it from (
> single setter)
> iam going to use it on the dunes and racing
>
> thanx
>

There used to be a couple You could get for free online but I havent
looked in a few years so I dont know if there are any now or not.
google "free cad softwear" and see what You get!
George


--- In offroadgokarts@yahoogroups.com, Michael <findawg78@...> wrote:
>
> Are the systems avalable to download some where online or do you have
to purchase them?

Hi Hesham
Tell us more about Your kart. Is it finished? Give some details about
it. If You can post some pictures of it!
George


--- In offroadgokarts@yahoogroups.com, hesham labib <hshmlabib@...>
wrote:
>
> hi that is hesham from egypt i built a very nice off road go kart
but i dont know what to do next  it is not ezy in egypt
> so can u tell me what to do please
> gratings from egypt
>
>
> --- On Mon, 11/17/08, George <gphunt2005@...> wrote:
>
> From: George <gphunt2005@...>
> Subject: [Off Road GoKarts] Re: Allmost a year
> To: offroadgokarts@yahoogroups.com
> Date: Monday, November 17, 2008, 6:38 AM
>
>
>
>
>
>
> Well I feal like I am beeting a dead horse, but I still think this
> group could make a comeback if only some of the other members would
get
> on hear and try with Me!
> Come on guys I know some of You must be working on something,
wether it
> be a new build or just tweeking what You have allready built! Lets
hear
> from you other gear heads!
> George
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Are the systems avalable to download some where online or do you have to
purchase them?




________________________________
From: George <gphunt2005@...>
To: offroadgokarts@yahoogroups.com
Sent: Tuesday, November 18, 2008 1:15:07 PM
Subject: [Off Road GoKarts] Re: 3dm files?


I just took a look at the rhino files, it is a traning program for a 3d
cad system of the same name. The 3DM files requier a cad system to view.
George

--- In offroadgokarts@ yahoogroups. com, "Mike" <findawg78@. ..> wrote:
>
> Hello, its definately been awhile. I was browsing and couldnt open
the
> 3dm files? Do they require a special program to open? Couldnt open
the
> rhino file either? Is that a model or 3d building program?
>






[Non-text portions of this message have been removed]

hi that is hesham from egypt i built a very nice off road go kart but i dont
know what to do next  it is not ezy in egypt
so can u tell me what to do please
gratings from egypt


--- On Mon, 11/17/08, George <gphunt2005@...> wrote:

From: George <gphunt2005@...>
Subject: [Off Road GoKarts] Re: Allmost a year
To: offroadgokarts@yahoogroups.com
Date: Monday, November 17, 2008, 6:38 AM






Well I feal like I am beeting a dead horse, but I still think this
group could make a comeback if only some of the other members would get
on hear and try with Me!
Come on guys I know some of You must be working on something, wether it
be a new build or just tweeking what You have allready built! Lets hear
from you other gear heads!
George


















[Non-text portions of this message have been removed]

I just took a look at the rhino files, it is a traning program for a 3d
cad system of the same name. The 3DM files requier a cad system to view.
George


--- In offroadgokarts@yahoogroups.com, "Mike" <findawg78@...> wrote:
>
> Hello, its definately been awhile. I was browsing and couldnt open
the
> 3dm files? Do they require a special program to open? Couldnt open
the
> rhino file either? Is that a model or 3d building program?
>

Hello, its definately been awhile. I was browsing and couldnt open the
3dm files? Do they require a special program to open? Couldnt open the
rhino file either? Is that a model or 3d building program?