I am building a 2 seater kart with a swing arm rear suspension. What is a good coil over spring shock to use. One that will not be to stiff but will support...
Matt, I am working on building my kart with a 42" solid steel live axle. How far apart are your rails that connect to the axle? Does it matter if you use two...
On my custom karting group, I have photos of the drawings I made of my frame. They are jpg photos so anyone can open them. There are no measurements yet, but...
The most impotant thing to remeber is how much does your vehicle weigh? You can adjust for the weight by putting the shocks inboard or outboard. If you have...
http://www.mcneel.com go to this site and download the demo for rhino 3D. i dont think you will want to buy the full version because it is very pricey. any ...
I know that the lighter the vehicle the better. However for vehicles weighing lets say around 650lbs with engine and a couple of passengers weighing a combined...
You have to sit in these to experience the steering effort. My BMW rack is about the same effort as the buggy is... maybe even a little more firm. You want...
True Eldon I agree that the steering needs to be firm enough to keep a feel of the surface you are driving on. I have a custom kart that weighs approximately...
I like the kart. I looked at it hen you first posted the URL. I think what you need is a differential to help the buggy turn. That is one of the big drawbacks...
I have searched and paid lots of $$ for help and have not gotten any yet. Maybe this group will turn my luck around. I have a 1982 Yamaha SR250 engine that I...
My frame rails are about 20 inches apart. I have pillow block bearings holding my axle on, and they are mounted directly to the top of the swing arm rails....
Hi Matt where is your custom karting group at i did a search and got nothing. have you got a link. Dave Matt <matt1ptkn1@...> wrote:On my custom karting...
Hi, I'm a Spanish guy trying to build my first Kart. I am doing ok but I'm strugling to get the rear axle. Do I need to buy one or can I make one myself? If I...
Just picked up an old dune cycle (trike) it has a TC88 secondary clutch,5/8's belt,I mounted a 335 rotax (ski-doo), any one know what kind of drive clutch...
I don't think you will find a drive clutch for that engine that will match the driven clutch. The driven clutch you have is only good for about 5 hp. The drive...
Hey, I really like your Piranha, you did a great job on it. Where did you get those front tires from and where could I find some for my cart. Do they work...
Hey Greg, Those wheels are 19" Honda XS650 series front wheels 100/90-19". The tires are a Dunlop 19" rear Motocross tire. You need to use tubes also in these...
The link is www.groups.yahoo.com/group/customkarting ... got nothing. have you got a link. Dave ... photos of the drawings I made of ... no ... will ... shocks...
Hey everyone Im a new member to this group. I also am a dessigner/fabricater of a go cart. I am in the midst of designing a go cart with individual front...
Hi Guys I have a 5hp briggs, a mig welder, 4 turf tires, 1"x5' rod, hubs and mounting disks, and about a dozen bicycle frames. Any Ideas?? The clutch has 11...
I have a 6 1/2 hp with turf tires and a comet torque converter. I had to switch from a 48 tooth to a 54 tooth sprocket on the axle to get better acceleration....
Typically, with a 5HP engine you need a 6:1 drive for a centrifugal clutch and at least 5:12 for a torque converter. This means a 10:60 combo for the...
Thanks for the info. The tires I have are 2 18X9 and 2 16x4 inches. I also have 2 10x4 inch tires mounted on the snowblower I could possibly use. The clutch is...
i have a 750 kawasaki kz i want to build a 2 seater bugy with but i cant get plans anywhere can any ony please send me some free plans the engige allready has...
Thanks guys I am building this out of stuff I already have and I am on a very limited budget. I have about 100. to spend on the project. IS rear suspension...
Does anyone have experience with purchasing parts from badland from the united states? I ordered some bushings from Badland, but the canada post office tells...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
