Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the nwohiogardentractorpulling
group.

   File        : /Syracuse Nationals update.doc
   Uploaded by : tpfirefly
   Description : update 6/8/08

You can access this file at the URL:
http://groups.yahoo.com/group/nwohiogardentractorpulling/files/Syracuse%20Nation\
als%20update.doc

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.htmlfiles

Regards,

tpfirefly

KB hitches & wheelie bars for sell on ebay
130220390612
130220389358

Hello All! Tri county pullers website is updated, with our schedule
and, some topics we have been discussing at our meetings.
                     www.geocities.com/tricountypullers

                                             Thanks,

                                                Kyle

Several new Kohler K321 & command parts listed on ebay, also under
garden tractor pulling there are cub gear sets, clutch drivers and
starter pulleys!

We've got another one up! Here's a preview of the machinist article
for those new to the machining trade: "Help For Novices." If you wish
to view this article complete with images go to the article directory
at http://www.proshoppublishing.com/articles.html

Enjoy.

* * *

"Help For Novices" (preview)

What is the best way to learn something? For my money, it's hard to
beat the "just do it" method, which may land you in hot water once in
a while. So be it.

The following are some basic shop practices for newcomers. The
information is also about avoiding blunders. Not all mistakes in a
machine shop are of the dimensional type. Blowing chips on the guy
next to you is an example of a nondimensional mistake. By learning
some of these basics, newcomers will be in a better position to work
independently and with other shop personnel.

- Avoid using the support table of a disc sander to deburr thin plates.

I've worked with two people who severely ground down their thumbs
trying to deburr the edges of a thin plate in a disc sander. As they
were sanding an edge, the plate got sucked into the small opening
between the table and the disc, which pulled the plate and their
thumbs into the disc. If you are going to deburr a plate with a disc
sander, make sure you hold the plate above the support table.

- Understand nominal sizes.

Nominal sizes are convenient labels used to discuss part sizes that,
in reality, nobody will ever hit. However slight, there is always some
tolerance or error in every machined part. People sometimes say, "Just
shoot for the nominal." That means if the nominal size you're working
to is 1/2", then you need to do your best, within reason, to machine
the part to 1/2", taking into account the type of machining process
being used. You wouldn't be expected to hold 1/2" nominal size as
closely with a milling machine as you would with a surface grinder.

- Know the difference between 'absolute' and 'incremental' ...


* * *

Check out the rest of this article at
http://www.proshoppublishing.com/articles_novices.html

Best,
Joanna

The Blue Ridge Mountain Garden Tractor Pullers Association
(BRMGTPA)will be having an indoor pull on July 19th and it should be a
big event. We will be heavily promoting this event. Anderson Coliseum
is the location inside the Virginia Horse Center in Lexington, VA and
the website is http://www.horsecenter.org . It is an incredible
facility and is easy to get to. It is right on the intersections of
I-81 and I-64 in Virginia. You can see the facility from the
Interstate highway. Check it out on their website. This will be a
no-rain-out event due to it being indoors. Please contact me (Greg
Edwards) for more info at sdrawde@... or you can email me for
my phone number. Our pulling club website is
http://www.blueridgemountainpullers.com

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the nwohiogardentractorpulling
group.

   File        : /2007streetfairflyer.doc
   Uploaded by : lhelms_98 <lhelms_98@...>
   Description : fair pull

You can access this file at the URL:
http://groups.yahoo.com/group/nwohiogardentractorpulling/files/2007streetfairfly\
er.doc

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/help/us/groups/files

Regards,

lhelms_98 <lhelms_98@...>

please visit my web store at www.cubclassics.com for all your parts
needs lots of used tractors.

i don't post on here much but i wanted to let everyone know that i
made it another year. i had pepole tell me that i would never see 18 {
i was pretty wild with cars and trucks, could never grow up} well
today i trun 51 and i still act like a kid when i get behind the whell
but not as often. i hope everyone has a geat day.

Rick Hobbs
wis.toyfarmer

Hi all. I'm looking for some info.  I am building a 1969 Whell horse
commando V8 with an 18hp Briggs IC twin cylinder Vertical shaft.  It
is an extra in my collection of Horses, and i thought I would take off
the 8hp pull start Briggs someone put on it and put the 18 I had on
it.  I know this is a vertical shaft tractor, but its also a 69 with a
solid frame and unidrive rear like its big brothers.  I live in
Chillicothe OH.  Are there any groups or classes in my area that I
could pull this tractor in?  Again its a toy.  Not planning to pull
every week, and no dreams of rooms full of trophies.  Just want to
have some fun with it.  Like to say it does a little more than just go
to shows and look pretty.  Thanks

Joel

I added photos of our new 70 ci turbo diesel under construction in the
photos section under "New Turbo Diesel".

I am designing a new micro controlled ignition system to address NLA
Tecumseh OH series engines, and a few HH models for that matter.

Since I needed to address a start/retard feature anyway, I can now
offer any desirable performance curve. So, what is it?

I plan a start at TBD for < 500RPM. Above 500, the first shift would
be to stock full advance. To squeeze out more power, I would imagine
another 3 degrees advance at 4000 RPM or so would be a good thing -
right?

This can either be a step or true curve - Any ideas?

This product will also provide a tach output so that any desired
automotive tach will work correctly.

Any other ideas of desirable features? Rev limiting? An LED to
indicate a given RPM? Redline?

I look forward to your thoughts...

Thank you,

Dale Colvert/Overnight Solutions

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> I still have my cub up for sale 650 or best offer no less then 500
> just send me a message and I'll list details
>
Send me the details and I will get back to you. Thanks.

I still have my cub up for sale 650 or best offer no less then 500
just send me a message and I'll list details

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> Will SELL for $650 OBO.... my loss is your gain.....
>
>
>
> --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> <cityboystoy@> wrote:
> >
> > I have for sale a narrow cub 102/122 two sets new turff tires for
> > street pulls not mounted kohler. 12hp motor tractor was spray gun
> > panted yellow last spring. Mid west super cub drive shaft and
clutch
> > used maybe 5 pulls steel and cast flywheel. tractor almost ready
to
> > pull motor just needs put back in pulled to store over the winter
nib
> > voltage regulater as well a coil does not nee replace just wanted
to
> > have back up.......$1000 obo.cash only.......located in neo ohio
pick
> > up only
> >
>

Will SELL for $650 my loss is your gain.....



--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> I have for sale a narrow cub 102/122 two sets new turff tires for
> street pulls not mounted kohler. 12hp motor tractor was spray gun
> panted yellow last spring. Mid west super cub drive shaft and clutch
> used maybe 5 pulls steel and cast flywheel. tractor almost ready to
> pull motor just needs put back in pulled to store over the winter nib
> voltage regulater as well a coil does not nee replace just wanted to
> have back up.......$1000 obo.cash only.......located in neo ohio pick
> up only
>

I have for sale a narrow cub 102/122 two sets new turff tires for
street pulls not mounted kohler. 12hp motor tractor was spray gun
panted yellow last spring. Mid west super cub drive shaft and clutch
used maybe 5 pulls steel and cast flywheel. tractor almost ready to
pull motor just needs put back in pulled to store over the winter nib
voltage regulater as well a coil does not nee replace just wanted to
have back up.......$1000 obo.cash only.......located in neo ohio pick
up only

Get ahold of Roger
--- In gardentractorpulling@yahoogroups.com, "rogercasto32"
<rogercasto32@...> wrote:
>
> Lodi Garden Tractor Pullers Asso.
>
>
>
> List of Pulls
>
>
>
>
> 1. Nashville May 28,2007
> Weigh in @ 4 pm Pull @ 5 pm
>
>
> 2. Polk June 16, 2007
> Weigh in @ 1 pm Pull @ 2 pm
>
>
> 3. West Salem June 29, 2007
> Weigh in @ 4 pm Pull @ 6 pm
>
>
> 4. Columbia Station June 30, 2007
> Weigh in @ Noon Pull @ 2 pm
>
>
> 5. Spencer July 4, 2007
> Weigh in @ Noon Pull @ 2 pm
>
>
> 6. Shreve July 13, 2007
> Weigh in @ 5 pm Pull @ 6 pm
>
>
> 7. Rittman July 27,2007
> Weigh in @ 6 pm Pull @ 7 pm
>
>
> 8. Doylestown August 4, 2007
> Weigh in @ 1 pm Pull @ 2 pm

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> I herd of them but could not find a rulebook or calender of events
> to get any info........
>
>
> --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> <no_reply@> wrote:
> >
> > The Lodi pullers may have a class you fit in.
> >
> > --- In
nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > <cityboystoy@> wrote:
> > >
> > > I had a stocker Its been put in to the 12 stock altered
becouse i
> > > have a steel flywheel and motor has been cleaned up to 30
over
> no
> > > port and pollished though....  last season could not compeate
> with
> > 14
> > > horse stock now i have no chance with the 12 stock altered it
> > > baseicly a stock tractor no other mods other then a mwsc
clutch.
> > > I may have to find some other group to pull in order to pull
in
> the
> > > stock class.. I just have to see what it will do Thanks for
the
> > offer
> > > on the gas I will let you know for sure what race ill be at
> > >
> > > Tim
> > >
> > > --- In nwohiogardentractorpulling@yahoogroups.com,
bigkrank2000
> > > <no_reply@> wrote:
> > > >
> > > > Just google Jerry's Speed Shop. It's on Rugby St just off
> Anthony
> > > > Wayne Trail. Do you have a stocker? 2 or 3 gallons will get
you
> > > thru
> > > > a year easy. Take your own jug and make sure it's a good one
> that
> > > > will tolerate all the stuff that's in race gas. I get new
once
> > > every
> > > > year right before the season. Dumb as hell them specing C12
for
> > > stock
> > > > motors but I guess that's the easiest thing for them to
check.
> > > >
> > > > --- In
> nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > > <cityboystoy@> wrote:
> > > > >
> > > > > Thats by faw the chepest so far Where at in toledo
> > > > > address/directions..
> > > > > What is the shelf life and how many gallons does the
average
> > > puller
> > > > > use I live in shelby and just wanted to konw how often i
> would
> > > have
> > > > > to make the trip to Toledo...
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- In nwohiogardentractorpulling@yahoogroups.com,
> bigkrank2000
> > > > > <no_reply@> wrote:
> > > > > >
> > > > > > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's
> normally
> > > the
> > > > > > cheapest.
> > > > > >
> > > > > > --- In
> > > nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > > > > <cityboystoy@> wrote:
> > > > > > >
> > > > > > > Just wanted to let you know that Im still planning on
> > pulling
> > > > > some
> > > > > > this
> > > > > > > year work has been very busy 7 days a week sence the
end
> of
> > > > last
> > > > > > season
> > > > > > > I see there where a few changes in officers congrads
to
> > all..
> > > > > > > Also I see that there some rule changes for the good
> > > > > > > I just can't get over the price for the c12 gas....
> > > > > > > So if any one knows of any place cheep please share
> info..
> > > Just
> > > > > got
> > > > > > > motor back form shop hence I have not been able to
pull
> > hope
> > > to
> > > > > be at
> > > > > > > the pull after fathers day so till then FULL pull
> > > > > > >
> > > > > > > Tim Loughman
> > > > > > > CityBoysToy
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

I herd of them but could not find a rulebook or calender of events
to get any info........


--- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
<no_reply@...> wrote:
>
> The Lodi pullers may have a class you fit in.
>
> --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> <cityboystoy@> wrote:
> >
> > I had a stocker Its been put in to the 12 stock altered becouse i
> > have a steel flywheel and motor has been cleaned up to 30 over
no
> > port and pollished though....  last season could not compeate
with
> 14
> > horse stock now i have no chance with the 12 stock altered it
> > baseicly a stock tractor no other mods other then a mwsc clutch.
> > I may have to find some other group to pull in order to pull in
the
> > stock class.. I just have to see what it will do Thanks for the
> offer
> > on the gas I will let you know for sure what race ill be at
> >
> > Tim
> >
> > --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> > <no_reply@> wrote:
> > >
> > > Just google Jerry's Speed Shop. It's on Rugby St just off
Anthony
> > > Wayne Trail. Do you have a stocker? 2 or 3 gallons will get you
> > thru
> > > a year easy. Take your own jug and make sure it's a good one
that
> > > will tolerate all the stuff that's in race gas. I get new once
> > every
> > > year right before the season. Dumb as hell them specing C12 for
> > stock
> > > motors but I guess that's the easiest thing for them to check.
> > >
> > > --- In
nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > <cityboystoy@> wrote:
> > > >
> > > > Thats by faw the chepest so far Where at in toledo
> > > > address/directions..
> > > > What is the shelf life and how many gallons does the average
> > puller
> > > > use I live in shelby and just wanted to konw how often i
would
> > have
> > > > to make the trip to Toledo...
> > > >
> > > >
> > > >
> > > >
> > > > --- In nwohiogardentractorpulling@yahoogroups.com,
bigkrank2000
> > > > <no_reply@> wrote:
> > > > >
> > > > > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's
normally
> > the
> > > > > cheapest.
> > > > >
> > > > > --- In
> > nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > > > <cityboystoy@> wrote:
> > > > > >
> > > > > > Just wanted to let you know that Im still planning on
> pulling
> > > > some
> > > > > this
> > > > > > year work has been very busy 7 days a week sence the end
of
> > > last
> > > > > season
> > > > > > I see there where a few changes in officers congrads to
> all..
> > > > > > Also I see that there some rule changes for the good
> > > > > > I just can't get over the price for the c12 gas....
> > > > > > So if any one knows of any place cheep please share
info..
> > Just
> > > > got
> > > > > > motor back form shop hence I have not been able to pull
> hope
> > to
> > > > be at
> > > > > > the pull after fathers day so till then FULL pull
> > > > > >
> > > > > > Tim Loughman
> > > > > > CityBoysToy
> > > > > >
> > > > >
> > > >
> > >
> >
>

The Lodi pullers may have a class you fit in.

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> I had a stocker Its been put in to the 12 stock altered becouse i
> have a steel flywheel and motor has been cleaned up to 30 over  no
> port and pollished though....  last season could not compeate with
14
> horse stock now i have no chance with the 12 stock altered it
> baseicly a stock tractor no other mods other then a mwsc clutch.
> I may have to find some other group to pull in order to pull in the
> stock class.. I just have to see what it will do Thanks for the
offer
> on the gas I will let you know for sure what race ill be at
>
> Tim
>
> --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> <no_reply@> wrote:
> >
> > Just google Jerry's Speed Shop. It's on Rugby St just off Anthony
> > Wayne Trail. Do you have a stocker? 2 or 3 gallons will get you
> thru
> > a year easy. Take your own jug and make sure it's a good one that
> > will tolerate all the stuff that's in race gas. I get new once
> every
> > year right before the season. Dumb as hell them specing C12 for
> stock
> > motors but I guess that's the easiest thing for them to check.
> >
> > --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > <cityboystoy@> wrote:
> > >
> > > Thats by faw the chepest so far Where at in toledo
> > > address/directions..
> > > What is the shelf life and how many gallons does the average
> puller
> > > use I live in shelby and just wanted to konw how often i would
> have
> > > to make the trip to Toledo...
> > >
> > >
> > >
> > >
> > > --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> > > <no_reply@> wrote:
> > > >
> > > > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally
> the
> > > > cheapest.
> > > >
> > > > --- In
> nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > > <cityboystoy@> wrote:
> > > > >
> > > > > Just wanted to let you know that Im still planning on
pulling
> > > some
> > > > this
> > > > > year work has been very busy 7 days a week sence the end of
> > last
> > > > season
> > > > > I see there where a few changes in officers congrads to
all..
> > > > > Also I see that there some rule changes for the good
> > > > > I just can't get over the price for the c12 gas....
> > > > > So if any one knows of any place cheep please share info..
> Just
> > > got
> > > > > motor back form shop hence I have not been able to pull
hope
> to
> > > be at
> > > > > the pull after fathers day so till then FULL pull
> > > > >
> > > > > Tim Loughman
> > > > > CityBoysToy
> > > > >
> > > >
> > >
> >
>

I had a stocker Its been put in to the 12 stock altered becouse i
have a steel flywheel and motor has been cleaned up to 30 over  no
port and pollished though....  last season could not compeate with 14
horse stock now i have no chance with the 12 stock altered it
baseicly a stock tractor no other mods other then a mwsc clutch.
I may have to find some other group to pull in order to pull in the
stock class.. I just have to see what it will do Thanks for the offer
on the gas I will let you know for sure what race ill be at

Tim

--- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
<no_reply@...> wrote:
>
> Just google Jerry's Speed Shop. It's on Rugby St just off Anthony
> Wayne Trail. Do you have a stocker? 2 or 3 gallons will get you
thru
> a year easy. Take your own jug and make sure it's a good one that
> will tolerate all the stuff that's in race gas. I get new once
every
> year right before the season. Dumb as hell them specing C12 for
stock
> motors but I guess that's the easiest thing for them to check.
>
> --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> <cityboystoy@> wrote:
> >
> > Thats by faw the chepest so far Where at in toledo
> > address/directions..
> > What is the shelf life and how many gallons does the average
puller
> > use I live in shelby and just wanted to konw how often i would
have
> > to make the trip to Toledo...
> >
> >
> >
> >
> > --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> > <no_reply@> wrote:
> > >
> > > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally
the
> > > cheapest.
> > >
> > > --- In
nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > <cityboystoy@> wrote:
> > > >
> > > > Just wanted to let you know that Im still planning on pulling
> > some
> > > this
> > > > year work has been very busy 7 days a week sence the end of
> last
> > > season
> > > > I see there where a few changes in officers congrads to all..
> > > > Also I see that there some rule changes for the good
> > > > I just can't get over the price for the c12 gas....
> > > > So if any one knows of any place cheep please share info..
Just
> > got
> > > > motor back form shop hence I have not been able to pull hope
to
> > be at
> > > > the pull after fathers day so till then FULL pull
> > > >
> > > > Tim Loughman
> > > > CityBoysToy
> > > >
> > >
> >
>

Tim - I sell it for $10 a gallon and I get it at Jerry's but I bring
it to the pulls for the guys if you want me to bring you some and
save you a 100 mile trip to Toledo and back. Let me know what pull
you will be at and I will have some.
Mike

--- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
<no_reply@...> wrote:
>
> Just google Jerry's Speed Shop. It's on Rugby St just off Anthony
> Wayne Trail. Do you have a stocker? 2 or 3 gallons will get you
thru
> a year easy. Take your own jug and make sure it's a good one that
> will tolerate all the stuff that's in race gas. I get new once
every
> year right before the season. Dumb as hell them specing C12 for
stock
> motors but I guess that's the easiest thing for them to check.
>
> --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> <cityboystoy@> wrote:
> >
> > Thats by faw the chepest so far Where at in toledo
> > address/directions..
> > What is the shelf life and how many gallons does the average
puller
> > use I live in shelby and just wanted to konw how often i would
have
> > to make the trip to Toledo...
> >
> >
> >
> >
> > --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> > <no_reply@> wrote:
> > >
> > > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally
the
> > > cheapest.
> > >
> > > --- In
nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > > <cityboystoy@> wrote:
> > > >
> > > > Just wanted to let you know that Im still planning on pulling
> > some
> > > this
> > > > year work has been very busy 7 days a week sence the end of
> last
> > > season
> > > > I see there where a few changes in officers congrads to all..
> > > > Also I see that there some rule changes for the good
> > > > I just can't get over the price for the c12 gas....
> > > > So if any one knows of any place cheep please share info..
Just
> > got
> > > > motor back form shop hence I have not been able to pull hope
to
> > be at
> > > > the pull after fathers day so till then FULL pull
> > > >
> > > > Tim Loughman
> > > > CityBoysToy
> > > >
> > >
> >
>

Just google Jerry's Speed Shop. It's on Rugby St just off Anthony
Wayne Trail. Do you have a stocker? 2 or 3 gallons will get you thru
a year easy. Take your own jug and make sure it's a good one that
will tolerate all the stuff that's in race gas. I get new once every
year right before the season. Dumb as hell them specing C12 for stock
motors but I guess that's the easiest thing for them to check.

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> Thats by faw the chepest so far Where at in toledo
> address/directions..
> What is the shelf life and how many gallons does the average puller
> use I live in shelby and just wanted to konw how often i would have
> to make the trip to Toledo...
>
>
>
>
> --- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
> <no_reply@> wrote:
> >
> > $9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally the
> > cheapest.
> >
> > --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> > <cityboystoy@> wrote:
> > >
> > > Just wanted to let you know that Im still planning on pulling
> some
> > this
> > > year work has been very busy 7 days a week sence the end of
last
> > season
> > > I see there where a few changes in officers congrads to all..
> > > Also I see that there some rule changes for the good
> > > I just can't get over the price for the c12 gas....
> > > So if any one knows of any place cheep please share info.. Just
> got
> > > motor back form shop hence I have not been able to pull hope to
> be at
> > > the pull after fathers day so till then FULL pull
> > >
> > > Tim Loughman
> > > CityBoysToy
> > >
> >
>

Thats by faw the chepest so far Where at in toledo
address/directions..
What is the shelf life and how many gallons does the average puller
use I live in shelby and just wanted to konw how often i would have
to make the trip to Toledo...




--- In nwohiogardentractorpulling@yahoogroups.com, bigkrank2000
<no_reply@...> wrote:
>
> $9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally the
> cheapest.
>
> --- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
> <cityboystoy@> wrote:
> >
> > Just wanted to let you know that Im still planning on pulling
some
> this
> > year work has been very busy 7 days a week sence the end of last
> season
> > I see there where a few changes in officers congrads to all..
> > Also I see that there some rule changes for the good
> > I just can't get over the price for the c12 gas....
> > So if any one knows of any place cheep please share info.. Just
got
> > motor back form shop hence I have not been able to pull hope to
be at
> > the pull after fathers day so till then FULL pull
> >
> > Tim Loughman
> > CityBoysToy
> >
>

$9.10 a gallon at Jerry's Spped Shop in Toledo. He's normally the
cheapest.

--- In nwohiogardentractorpulling@yahoogroups.com, "tim_loughman"
<cityboystoy@...> wrote:
>
> Just wanted to let you know that Im still planning on pulling some
this
> year work has been very busy 7 days a week sence the end of last
season
> I see there where a few changes in officers congrads to all..
> Also I see that there some rule changes for the good
> I just can't get over the price for the c12 gas....
> So if any one knows of any place cheep please share info.. Just got
> motor back form shop hence I have not been able to pull hope to be at
> the pull after fathers day so till then FULL pull
>
> Tim Loughman
> CityBoysToy
>

Just wanted to let you know that Im still planning on pulling some this
year work has been very busy 7 days a week sence the end of last season
I see there where a few changes in officers congrads to all..
Also I see that there some rule changes for the good
I just can't get over the price for the c12 gas....
So if any one knows of any place cheep please share info.. Just got
motor back form shop hence I have not been able to pull hope to be at
the pull after fathers day so till then FULL pull

Tim Loughman
CityBoysToy

Sorry for the delay but the Tricounty Pullers 2007 schedule and rules
are posted on their website -
http://www.geocities.com/tricountypullers/MAIN

Thanks Mike

WELL I AM HAPPY TO ANNOUNCE THAT I HAVE CONFIRMATION ON THE JUNE
  RACE.

  THE RACE IS GOING TO BE JUNE 2nd AND JUNE 3rd AT THE WILSON COUNTY
  FAIR GROUNDS 2331 Hwy 301 South Wilson Nc 27893-8556

  JUNE 2nd REG 12:00
  TECH 1:00
  Race 4:00

  JUNE 3rd REG 11:00
  TECH 12:00
  RACE 2:00

  CAMPING WILL BE ALLOWED ON SITE IF YOU DECIDE TO BRING AN RV THEY
  WILL HAVE WATER AND ELECTRICITY HOOK UPS BUT THERE WILL BE A CHARGE
  OF 20.00 A DAY. THERE IS ALSO HOTLES DOWN THE ROAD. DAVE ALLGOOD
  THE
  FAIR GROUND EVENTS DIRECTOR SAID THAT THE DELUXE INN AND THE
  MATTHEWS MOTEL ARE ALWAYS FILLED FIRST DURING OTHER EVENTS SO I
  WILL
  SEE WHAT I CAN DO FOR SOME RATES AT THOSE TWO AND MAYBE TAKE A RIDE
  AND SEE WHAT THEY ARE??? THERE ARE PLENTY OF RESTAURANTS REAL
  CLOSE.
  THE FACILITYS ARE AWSOME AND I MEAN AWSOME PLENTY OF ROOM TO RUN
  THE
  KIDS CAN RUN WIDE OPEN. THIS EVENT WILL BE RAN RAIN OR SHINE WITH
  IN
  RESON OF COURSE. IF AND WHEN WE PULL THIS OFF HE IS ALREADY TALKING
  SOMETHING IN SEPTEMBER JUST BEFORE THE FAIR..I COULD RUN ON FOREVER
  SO ANY QUESTIONS PLEASE GIVE ME OR AMY A CALL OUR NUMBERS ARE 919-
  702-0065 FOR ME AND FOR AMY 919-702-0131.

  Dave Lande
  PRESIDENT CLMRA
______________________________________________________________________
____________________
Could Everyone Respond to my email (Yardzilla82@...)that
is planning on attending this event and what class they will
be racing in or if they are just coming to watch.

Thank You

David Wright
______________________________________________________________________
____________________
Carolina Lawn Mower Racing Association and Contentnea VFD
Proudly present for the first time ever Lawn Mower Race at the Wilson
Co. Fairgrounds.
Two days of action packed racing.
Date: June 2ND @ 4 pm and June 3RD @ 2 pm
Come early and meet the drivers.
All proceeds go to the Victory Junction Gang Camp and Contentnea VFD.

Five Dollars a person 12 and under Free.
Food and drinks will be available.
Kids rides and more
DJ playing music after races.
______________________________________________________________________
____________________
If you are coming from GA here are the directions
I-20 E via the ramp on the LEFT toward AUGUSTA (Crossing into SOUTH
CAROLINA)
Merge onto I-95 N via EXIT 141A on the LEFT toward FAYETTEVILLE
(Crossing into NORTH CAROLINA).
Merge onto US-264 E via EXIT 119.
Merge onto US-301 N via EXIT 43A.
End at 2331 Us Highway 301 S Wilson, NC 27893-8556, US

If you are coming from Boston MA here are the directions
I-90 W / MASS PIKE / MASSACHUSETTS TURNPIKE (Portions toll).
Merge onto I-84 W via EXIT 9 toward US-20 / STURBRIDGE / HARTFORD
(Portions toll) (Crossing into CONNECTICUT).
Merge onto CT-15 S via EXIT 57 on the LEFT toward I-91 S / CHARTER
OAK BR / N.Y. CITY.
Merge onto I-91 S via EXIT 86 toward NEW HAVEN / N.Y. CITY.
Merge onto I-95 S via the exit on the LEFT (Portions toll) (Crossing
into NEW YORK).
Keep RIGHT to take I-95 S toward G W BRIDGE / LOWER LEVEL / LAST NY
EXIT (Crossing into NEW JERSEY).
Keep LEFT to take I-95 EXPRESS LN S / NEW JERSEY TURNPIKE S toward I-
80 / GARDEN STATE PARKWAY / PATERSON.
Take I-95 S / NEW JERSEY TURNPIKE S toward US-46 / NEWARK (Portions
toll).
Keep RIGHT to take NEW JERSEY TURNPIKE S toward CARS-TRUCKS-BUSES
(Portions toll).
NEW JERSEY TURNPIKE S becomes I-295 S (Portions toll) (Crossing into
DELAWARE).
Merge onto I-95 S via the exit on the LEFT (Portions toll) (Crossing
into MARYLAND).
Merge onto I-495 W / CAPITAL BELTWAY via EXIT 27 toward SILVER SPRING
(Crossing into VIRGINIA).
Merge onto I-95 S via EXIT 57A toward RICHMOND
Merge onto I-295 S via EXIT 84A on the LEFT toward ROCKY MT NC.
Take the I-295 S exit on the LEFT toward I-95 SOUTH / EMPORIA / ROCKY
MOUNT NC.
Merge onto I-95 S (Crossing into NORTH CAROLINA).
Merge onto US-264 E via EXIT 119.
Merge onto US-301 N via EXIT 43A.
End at 2331 Us Highway 301 S
Wilson, NC 27893-8556

Local Places To Stay: There are many more that I did not list.
Econo Lodge
1815 Us Highway 301 S
Wilson, NC 27893
(252) 243-1900
Deluxe Inn of Wilson
2617 Us Highway 301 S
Wilson, NC 27893
(252) 237-1178
Relax Inn
2650 Us Highway 301 S
Wilson, NC 27893
(252) 243-8437
Beefmastor Inn
2656 Us Highway 301 S
Wilson, NC 27893
(252) 237-7343
Quality Inn South
2901 US Highway 301 S
Wilson, NC 27893
(252) 243-5165
Travelodge
2901 Us Highway 301 S
Wilson, NC 27893
(252) 243-5165
Best Western Lasammana
817A Ward Blvd
Wilson, NC 27893
(252) 237-8700
Holiday Inn
2308 Montgomery Dr W
Wilson, NC 27893
(252) 246-1588
Microtel
5013 Hayes Pl W
Wilson, NC 27896
(252) 234-0444
Hampton Inn
5606 Lamm Rd
Wilson, NC 27896
(252) 291-0330

Places To Dine: There are many more that I did not list.
McDonalds No 2
4816 Ward Blvd
Wilson, NC 27893
(252) 291-3344
Western Sizzlin Steak House
101 Bruton St NE
Wilson, NC 27893
(252) 291-6100
K & W Cafeteria
116 Raleigh Road Pkwy N
Wilson, NC 27893
(252) 291-8828
Gators Sport Pub
2330 Nc Highway 42 E
Wilson, NC 27893
(252) 237-1625
Applebee's
2300 Forest Hills Rd W
Wilson, NC 27893
(252) 399-0504
Chili's Grill & Bar
2823 Raleigh Road Pkwy W
Wilson, NC 27896
(252) 246-0069


Parts Locations:
Kens Small Engine Repair
6028 Nc Highway 58 S
Stantonsburg, NC 27883
(252) 238-3163
Bethel Small Engine Repair
458 House Rd
Bethel, NC 27812
(252) 531-5243
Advance Auto Parts
415 Ward Blvd
Wilson, NC 27893
(252) 243-2169
Wilson Lawn & Garden Equipment Company
3042 Forest Hills Rd SW
Wilson, NC 27893
(252) 237-5542
Autozone
1201 Tarboro St SW
Wilson, NC 27893
(252) 243-7292

I have a totally custom pulling chassis for sale on eBay.
One-of-a-kind. Here is the item number if anyone is interested:
250099836766

Hi everyone. We are kicking off our regular pulling season in Virginia
on April 7th. We would like to invite anyone from anywhere that loves
the sport of pulling to come join us and try out our first class sled
and pulling organization. Our goal is to become the best pulling club
on the east coast. We have classes that will just about fit any
tractor you may have to pull. We have classes from 6 year old juniors
up to 4 cylinder car engines and everything in between. Some of our
classes may have different names than what some of you may be
accustomed to but you will find a spot for your tractor, I am almost
positive. Stock Altereds, Pro Altereds, Super Stocks, Pro Stocks, 30
Cubes, Open Super Stocks, etc. can all fit into our Modified
divisions. Check out the rules and cubic inch class you fit in. Our
Super Modified classes will encompass about any motorcycle, compact
diesel, or automobile engine tractors short of v8's. We even have a
Hot Stock class for those that like to do a "little something" to
their tractors that may be deemed "illegal" in most clubs. We have a
class just for your style of tractor. Just make sure you have a
4,000rpm limit governor on it. Check out those classes as well. We
would love to invite anyone to be a member but membership is not
required to pull with us. If you are looking for a non-intimidating,
fun-to-pull-with club, then this is it. Visit us at
www.blueridgemountainpullers.com and feel free to email or call me for
more information. I will give you my number upon request. We have
about a dozen sponsored pulls already and more may be in the works.
Thanks.