Benefit pull for St Judes
Garden Tractor Pull October 26th at Pop-A-Top in Ellis Grove IL.
Weigh in at 12 Pull at 1:30.. All proceeds will go to St. Judes.
Pull will be for trophies only. Trophies will be awarded to 1st 2nd
and 3rd Places. Classes are
Stock:
750 11.9 and under (16yrs old and under)
750 12-19.9hp (16 yrs old and under)
950 & 1050 11.9 and under
950 & 1050 12-19.9

950 & 1050 Stock Altered
950   30 Cube
1050 16hp Super Stock
1050 50 Cube
Motorcycle Class

Attendance Prizes will be handed out through out the day. There will
be a 50/50 drawing.

Directions to Ellis Grove:
From Missouri: If you come across JB Bridge – Take Route 3 south. You
will go through Columbia, Waterloo, Red Bud (at the square Rt 3 makes
a right), Ruma, past Evansville and then it is only 4-5 miles to
Ellis Grove. As soon as you come into Ellis Grove Pop-A-Top is on the
Right, you can't miss it.

From Belleville IL: Take 159 south to Red Bud. At the square in Red
Bud you will go straight and that turns into Rt 3.  You will then go
through Ruma, past Evansville and then it is only 4-5 miles to Ellis
Grove. As soon as you come into Ellis Grove Pop-A-Top is on the
Right, you can't miss it.

If you need other directions or have any questions please call Eric
at 618-324-4306 ,
John & Sabrina 618-282-4632 or email Sabrina at jsbbdets@...

If you don't see your class listed give Eric a call and it might be
able to be added.

Congrates,
    Darrell&Lenny Kirby on their first championship. Also to the
Tramme's for finishing 2nd.
                                          Scott

I am retiring from Garden Tractor Pulling and have 3 tractors for
sale; starter cart; 1998 4 wheel ATV; tires; 16x6'6" enclosed trailer
and misc. for sale.  If interested, please call Sam Irivn @ 859-234-
2668.  I also have pictures I can e-mail if you are interested in
seeing.  Thank you

How much for the rolling chassis? Thanks.

rrg


>From: buzillamini <no_reply@yahoogroups.com>
>Reply-To: illinoistractorpullingassoc@yahoogroups.com
>To: illinoistractorpullingassoc@yahoogroups.com
>Subject: [Illinois Tractor Pulling Assoc] Re: Info on building a mini-rod
>Date: Sat, 24 Aug 2002 02:36:08 -0000
>
>I have two mini's for sale one turn key and one rolling chassis
>contact me at BUZILLAMINI@... for more info.  I am sure I can
>sell you one cheaper than you can build one.
>
>--- In illinoistractorpullingassoc@y..., "emptypockets44"
><mrrglass@h...> wrote:
> > I am thinking of building a mini-rod using a 350 Chevy motor and
> > trans.  I don't have a clue on what rear-end to use or what gear to
> > run, or for that matter, what size tire to run.  Info on this would
> > be greatly appreciated and so would links to parts supplies.
>Thanks.
>



_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com

I have two mini's for sale one turn key and one rolling chassis
contact me at BUZILLAMINI@... for more info.  I am sure I can
sell you one cheaper than you can build one.

--- In illinoistractorpullingassoc@y..., "emptypockets44"
<mrrglass@h...> wrote:
> I am thinking of building a mini-rod using a 350 Chevy motor and
> trans.  I don't have a clue on what rear-end to use or what gear to
> run, or for that matter, what size tire to run.  Info on this would
> be greatly appreciated and so would links to parts supplies.
Thanks.

I am thinking of building a mini-rod using a 350 Chevy motor and
trans.  I don't have a clue on what rear-end to use or what gear to
run, or for that matter, what size tire to run.  Info on this would
be greatly appreciated and so would links to parts supplies.  Thanks.

--- In illinoistractorpullingassoc@y..., "jlruyle15" <jlruyle15@y...>
wrote:
> At some pulls I have noticed some pullers using a 12 volt electric
> motor and a V-belt to start their tractors in the 1050# class
instead
> of the regular starter. What kind of motor are they using and where
> can I find one?

There are several ways of going about building a starter cart, but
probably the most popular is to use a 6 volt starter motor off of a
mid 50's Ford truck.  These starters have an "inboard" bearing
instead of one located on the nose of the starter drive.  This allows
the mounting of a v-belt pulley without modifying the starter motor.
They will stand a 12V battery as long as you don't run them for
extended periods of time without allowing them to cool off.

At some pulls I have noticed some pullers using a 12 volt electric
motor and a V-belt to start their tractors in the 1050# class instead
of the regular starter. What kind of motor are they using and where
can I find one?

I would like to congradulate Jeff Sapp on his win at the Brown County
Fair. And i would also like to the Schnikter Pulling for the great
competition they gave jeff up untill the pull off.
Ryon

DOES ANYBODY KNOW THE RUNDOWN FROM THE FIRST 2 PULLS IN THE GARDEN
TRACTOR CLASS?

14,000 Farm Stock

1.  Raymond Kostecki
2.  Barry Wittenberg
3.  Tim Brauer
4.  Gary Leber
5.  Scott Brauer
6.  Bill Voorhees
7.  Urban Edelman
8.  Gene Stumpf

6200 4WDT

1.  Cody Lewis
2.  Kim Edington
3.  Jason Brammer
4.  Randy Nelson
5.  Jim Gray
6.  Dave Oakley

8000 Super Stock

1.  Joe Kwiatkowski
2.  Marc Clifton
3.  Jeff Justus
4.  Bob Schilling
5.  Kent Payne
6.  Robert Jones
7.  Steve Wiewel
8.  Patrick Huebner

10,000 Pro Stock

1.  Rodney Schnitker
2.  Bruce Skinner
3.  Jeff Sapp
4.  Danny Schnitker
5.  Larry Steinmann

7200 Modified

1.  Tom Bollinger
2.  Steve Bollinger
3.  Dave Rursch
4.  Vince Reinke
5.  Joe Kwiatkowski
6.  Don Deane
7.  Marc Clifton
8.  Jeff Justus

20,000 Pro Stock Semi

1.  Roger Clark
2.  Kay Aitken
3.  David Stalker
4.  Art Downs

My apologies for only having the top 8 and no distances.  Steve,
Dennis, and the Schuyler County Fair Board would like to thank all
the competitors, fans, and Dave Hager with "Old Ironsides" for making
this year's event a big success.

Ryan Quillen
rwquill@...

And I also want to congratulate Andy Bedoli with (Shameless) on his
win at Cerro Gordo also!

Ya... and I also want to congratulate Chad Mayhill (Sudden Impact) on
his first win at Cerro Gordo!

hey yall~

I just wanted to say good luck to the 58 mod class this year! I hope
to have lots of fun ! be good, stay safe, & have FUN!
~Kristin~

I just wanted to let ya'll know that I've updated my website. I have
pictures and distances (light supers only) from Decatur and
Griggsville.
If you're interested, please check it out...
http://www.angelfire.com/il2/BlueAngel

Beth

I have all the results from Taylorville except Jeff Justus in the IL
Grand Open Class.  I will try to post them latter.

Does anybody have the full results from the recent pulls in
Taylorville and Cowden IL?  Thanks for any help

Just joined today.  You have a very nice site.  Am from Kentucky and
we are in our 2002 pulling season already.  We were rained out for
several pulls but we're going good now.  Have posted a few pictures
of some of our pulls in the photo section.  Thank you

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the illinoistractorpullingassoc
group.

   File        : / Place you bet online now!
   Uploaded by : heritaoraz <heritaoraz@...>
   Description : Securely place your sport bets online. Click above.

You can access this file at the URL

http://groups.yahoo.com/group/illinoistractorpullingassoc/files/%20Place%20you%2\
0bet%20online%20now%21

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/us/groups/files

Regards,

heritaoraz <heritaoraz@...>

Rumor is that Tom Lashmett has officially entered his second
childhood, and may be "seeing red" these days!!!

Our sympathy goes out to ITPA President Mike Miller on the passing of
his father recently.  Please keep Mike and his family in your
thoughts and prayers during this difficult time.

would like to know if there will be a gardentractor pull there. and
if so what classes and what will the rules be. thank you.

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the illinoistractorpullingassoc
group.

   File        : / Click Here!
   Uploaded by : stevenjimmied <stevenjimmied@...>
   Description : No matter what your credit is like ,there is a card here for
you!

You can access this file at the URL

http://groups.yahoo.com/group/illinoistractorpullingassoc/files/%20Click%20Here%\
21

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/us/groups/files

Regards,

stevenjimmied <stevenjimmied@...>

Now I heard, another tornado hit Greenville. Anyone know anything
about that?

This site has a lot of great cards. I was able to get approved in 30
seconds for two different cards. Check it out for yourself.

http://visacardwithbadcredit.com

--- In illinoistractorpullingassoc@y..., goldenharvester
<no_reply@y...> wrote:
> I just saw on T.V. this noon where a tornado hit Union County Ill..
> 1 person was killed. I was just wondering how close it was to Anna.
> We know a few people from that area because our class is there.
Were
> there anymore injured? Does anyone know?

According to our local newspaper, the tornado hit the town of
Dongola, which is close to Anna.  ITPA member Bradley Corzine is from
Dongola, but I have not heard anything more.  Wayne Co. was also hit
last week, with damage and injuries in Fairfield.  ITPA members Larry
Greenwalt and Bob and Ladeana Davis are from that area, and reports
are that all is well with them.

I just saw on T.V. this noon where a tornado hit Union County Ill..
1 person was killed. I was just wondering how close it was to Anna.
We know a few people from that area because our class is there. Were
there anymore injured? Does anyone know?

You can get all of the referred BENEFITS for ONLY $1

* Get $1 per referral.
* MONEY is INSTANTLY deposited into your PayPal/E-Gold
account
* One webpage like this one, to promote, for FREE.
* UNIQUE referral link.
* Access to a great variety of e-books for free (worth
hundred of dollars)
* Real-Time statistics.
* Become part of the RICH group
* No more costs EVER.
* NO SCAM.
* NO MATRIX TO FILL, get a referral get paid.

http://www.payedbyyou.com/$1/?ID=443

This safelist is just $10.00 for lifetime membership.

Joining will be worth the money.
The members area is up, and it contains free software, e-books, and
free programs to help your marketing efforts. It also NOW includes a
search engine site submitter! And like everyone, if you read the ad
headings in the safelist, you will have chances to win prizes!
A few hundred dollars worth of free stuff plus a safe place to
advertise for only $10.00 ONE TIME. Why would you hesitate? JOIN NOW!!

http://www.blueskydreams.com/cgi-bin/paypal/main.cgi?signup

Here's An Awesome Deal - Free!
Get a Free Pro Membership to 130 New Pro Safelists (quality private
lists -
not Yahoo or the like) just for taking a minute to sign up for free
in
the
biggest - best free club ever to hit the internet! This list of
safelists is
updated constantly - and it's the handiest page we have ever had
access
to!!
We have been thanked many times already for this!

Revolution 9 is taking over! Be a part of it!
The first program we will join is only $5.00!
Of course-no obligation to join anything!

Join at the link below. Make sure our Sponsor ID number is in the
Sponsor
box in order to get your safelist memberships. The number is 52559.
Then
when we
see that you have joined - we will email you the url right away!

http://www.thincnet.com/revolution9/join.htm?id=52559

EVERY member of our club will earn BIG BIG money THIS YEAR!
No matter when you join!
Join R9 Free right now and get the details!

- Multiple income streams
- Handpicked hottest programs with the best payouts
- Everyone gets a shot at the top spots
- NO ONE GETS LEFT BEHIND
- Automated recruiting system (one of a kind)
- Your own web site
- Tons of resources and support
- Forced matrixes - HUGE SPILLOVER
- ONLY $5 entry for the first program!!
- Six figures in WEEKS NOT YEARS OR EVEN MONTHS!!
- TOP 100 club for top recruiters - SEVEN FIGURES THIS YEAR.

HURRY! JOIN US NOW. It's FREE.
See you there !!!!

http://www.thincnet.com/revolution9/join.htm?id=52559