best offer email me at demon1_4u@...

hello everyone,
I got a 75 chevy monza for sale.
its a hb in good condition, justs
needs to be put back together. (just body)
i have 3 piece glass front end for it
rear spoiler
front and rear axles to make it 5 lug
it has a posi rear end
4 speed tranny
262 v8

if anyone has any more questions about it u can call me at
419 283-8984 or 419 476-4846
my name is ed

I was wondering if anyone saw the Dual point Distributor for a 140
Cu. motor on ebay?
Here's the link if interested
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=2416371809&category=34205&rd=1
or
Item # 2416371809

does the 140 Cu. distributor also fit the 122 Cu. Cosworths Vega's?
Thanks

Here is the latest info on the Vega get together that will be going
one during the Super Chevy Show at Norwalk Raceway Park on July 24-
27. If enough vega's are in attendance they will be judging them
individually, as opposed to open class, and maybe even by years if we
have enough support. This is an awesome 3 day event that includes
carshows, Drag racing, and swap meet.
To show is $40 if you pre-register until July 11th, after that the
price is $45 at the gate. That is for car and driver for the whole
event. Anybody coming with the driver will need a $30 crew pass for
the event. Spectator passes depend on what days a person will be
there. A Fri, Sat, Sun pass for all three days is $35, Friday only
is $7, Sat. or Sun. only is $20, and a two day ticket for Sat. AND
Sun. is $30. All of this information and more is available on the
website at www.superchevyshow.com

Email me with questions or comments
Kevin Black
kbb@b...

ForSale - 1976 Buick Skyhawk, C06 Astro Roof option (glass top), 231
c.i., 5 speed, p/s. p/b, a/c not working. Glass roof is cracked, but
does not leak. Solid body. $1,500. Pictures posted on GMHBODY2.

Richard

i have a 75 vega motor 55k no carb/alt or other stuff like that ran
great putting in a 355 so its free to good home. come and get it. i'm
located right by the i-x center. email me at novamike3@... if
intrested. also have trans th350

--- In hbodiesofnorthernohio@yahoogroups.com, baker3502000
<no_reply@y...> wrote:
> I might be interested, do you have any pics and could you give me
some details??? Thanks Todd

i've posted pics of my progress in the photo spot under the folder
called 75 pro-street

hi i've just joined your group. my name is mike i have a 75 vega
which i am pro-streeting. i live in cleveland and hope to see u guys
at norwalk and car shows

Hope you don't mind me joining (i'm from south central ohio)but this
is the only Hbodie site i can find for ohio.

heres my email im in mi but have a 78 spyder

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com

i have a 1976 vega i am looking for infomation and or pictures on
installing a 9"ford rear .  it has a 7.5 3point rear now
any info would be apreciated

Vega Car show, Swap Meet and Races scheduled.  Many clubs and
organizations have talked about or attempted to get Vega enthusiasts
together without any luck.  Well now it is going to happen.  Through
discussions with many others in the Vega community I have decided
that instead of having a get-together of only Vegas it would be best
to start out during a larger show until attendance builds up enough
to host our own event.  During July 24th –27th 2003, Norwalk Raceway
Park (Located in North Central Ohio) is hosting its annual Super
Chevy Show.  I have personally attended this awesome event and it is
well worth your time to attend.  An auto parts swap meet, car show,
and races are continually going on throughout the weekend.  I will
get back to you on a later date with prices and maybe a more detailed
time schedule.  Please email me at kbb@... with comments,
questions, or suggestions.  I hope to hear from many of my fellow
Vega enthusiasts.  See you in July
Kevin Black
http://autos.groups.yahoo.com/group/Vegabonds/

I am currently in contact with both organizations and I will be
giving more information out as I receive it.  Again please email me
or post what you think.

thinking about selling project, about 65% completed, have some motor
parts and a few misc items, over 12.000 in parts and car cost, not to
mention what fab cost was!, full 3" exhaust, car is very stiff with
cage and connectors, look at photo album to get better look. asking
6500.00 e-mail me if intersted @ spydermike_1979@...

--- In hbodiesofnorthernohio@y..., locomonza <no_reply@y...> wrote:
> Hi, I have a problem with my holley, Ok the engine is a 350 with a
> holley 1850-3.
> When the car is at idle the fuel ratio gauge shows me that it is Ok
> but when I put the car on heavy load or a cruicing speed like 55 or
> 60 mph it shows me a very lean condition, I think maybe the power
> valve is not the correct for my vaccum, I have 15in at idle in
drive
> and I have a power valve 65, the power valve may open too late???
> could this be the problem???.And this could be the problem of my
> engine running too hot???
> Please if anybody can help me with this one.
> Thank you in advance
> Alex

From what I remember, Holley powervalves should be only 2 inches
below what you idle at.  This would put you at 125 or so.  Also
sounds like you need more fuel with larger jets.  I do remember I
could not get a powervalve low enough for a 327 with a roller cam in
it.  I had an 850 CFM double pumper.  Everyone said it was too much
for the 327.  I blocked off the powervalve and jetted the secondaries
8 numbers richer to make up for it.  78's in front and 88´s in back.
Mileage was terrible, but I wasn't after mileage.  Ran mid 12's in a
73 Camaro.

Mike

I am looking for the AC hoses on a 74 vega that run from the
compressor to the front cooloer and to the condenser.  I have checked
my local Napa and Autozone stores with no luck.  If anyone has any
tips or know of any hoses laying around please let me know.
Thanks, Kevin

Hi, I have a problem with my holley, Ok the engine is a 350 with a
holley 1850-3.
When the car is at idle the fuel ratio gauge shows me that it is Ok
but when I put the car on heavy load or a cruicing speed like 55 or
60 mph it shows me a very lean condition, I think maybe the power
valve is not the correct for my vaccum, I have 15in at idle in drive
and I have a power valve 65, the power valve may open too late???
could this be the problem???.And this could be the problem of my
engine running too hot???
Please if anybody can help me with this one.
Thank you in advance
Alex

Does anyone know anything about the vegabonds club that used to exist
in California if so let me know. thanks

Vega America's First annual Vega Gathering in Oklahoma City Ok

June 14, 15 and 16

This is an H-body potluck event so bring your own BBQ and grille

For more information Check out the websites @
http://vegaworld.hypermart.net and www.vegaworld.freeservers.com


Vega World

Vega Americas First annaul Vega America Gathering in oklahoma City OK
june 14,15 and 16


Check out the websites for more info go to
http://vegaworld.hypermart.net or www.vegaworld.freeervers.com


This is an hbody potluck event event so bring your own BBQ and grille



Vega World

Could you attend or help spread the word about our car show?
Branson Missouri Car & Truck Show Extravaganza!!
June 7th, 8th & 9th ~ 3 Days/2 Nights, lodging, fun, live
entertainment,
music, dancing, awards presentation dinner with cash give away,
raffles, door prizes, moonlight cruise and more. YOU DON'T
WANT TO MISS THIS ONE!!! Visit our website for full details:
www.carsplusclassics.com/carshow
Please tell your friends
Thanks Keith & Julie!!

Hi, I want to buy all this parts or some, I need the pulleys for a
monza V8(crank, w/pump,alternator)power steering setup w/brackets,
water pump, and alternator brackets.
Please let me what you have??
Thank you in advance
Alex

Hello Selling all my vega parts for $25. See ebay # 1818800145. Live
near Wheeling W.Va. Will not ship
Thanks
Dave aka whitetop on ebay

Hi y'all I posted 50+h-bodies at marcos amd was overwhelmed at the response so I
am posting at all the H-body clubs I can find. have access to 50 or more H-cars,
vegas, astres, wagons, GT's, monzas and the clones. this is N. Mich we use salt
on the roads not much sheetmetal but everything elsebumper to bumper, inside and
out.The owner dont want me th give ph.# they only have a home ph.# not a
business ph.# there are 65 acres here and some jewels in the junk. I can't get
in till the snow is gone (May 1 ?) then I will catalog all parts and post them
here, if interested in something contact me at powermad350@... and I will
add your order to my shopping list.


---------------------------------
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax

[Non-text portions of this message have been removed]

Hi, I'm looking to buy a power steering braket or the whole set up
(braket and pump) for a Monza V8.
The 79 camaro power steering can work???.
Please e-mail me :trolo1@...
Thnk you in advance
Alex

Hi, I'm looking to buy a set of front springs for monza.
I want to swap to a V8 but I can't find any place to buy the springs,
I have the moog part number but nobody carry them (summit, jeg's).
Please let me know where I can buy it or if somebody have a set for
sale.
Thank you very much
Alex

looking to swap nice fast 86 yamha radian looking for vegas aster maybe monza
complete or body e mail if interested have pic of bike.

You're all invited to join <a href=http://www.mwir.net.
target=new>http://www.mwir.net.</a>
It's a racing site mainly made up of people in the
Midwest. The primary group is based in Chicagoland, where
many events take place. I frequent between Chicago and
Ohio a lot and would like to see Ohio represented well
on this site also. Check it out ... go through the
forums and check out some of the discussions. If you
like what you see (especially if you're interested in
challenging Illinois to a few races or interested in putting
together an event from OH to IL) join the club. I hope
you're pleased with what you find.<br><br>V6Driver...
<a href=http://www.mwir.net target=new>http://www.mwir.net</a>

My husband and I are moving out of state and are
looking to sell a 1980 Camaro with positraction rearend.
The body is solid and we are including many parts
such as deck lid, hood, extra window glass, doors, and
many interior parts. The brake line is all stainless
steel, has new calipers and most of the undercarriage
has been replaced if not all. (I am not sure of how
much but you can discuss it with my hubby) It has a
small block engine. The interior is excellent. We were
asking $4,500 dollars but will sacrifice for $3,500. He
was setting the car up to race at Thompson Drag
Raceway but since we are moving, we need to sell. If
anyone is interested please contact us! Photos can be
sent via email if interested.