Here is the item number for one of our pulling engines for sale on
eBay. Item #7737373681. Check it out. No dissapointments.

All the info for the Nov.12th Blackhawk Indoor Pull is now available
at www.bhc.edu. Hope to see all of you there!!

Barry Pheiffer

Summer National in Tiffin, Ohio Saturday, September 3 - We will offer
$1000 to win, $750 for second, and $500 for third - paying a total of
15 places to any class with 100 entries. Pro Stock, Super Stock, 16
Stock Altered, Outlaw (Hilliard/NQS rules) There will also be 4 Tri-
County classes: 100% payback on these classes paying 4 places - 14hp
Stock class, 12hp Stock Altered, 16hp Stock Altered, 20hp Twin Stock
Altered (for those rules http://www.geocities.com/tricountypullers )

Summer Nationals Rain or Shine in Tiffin, Ohio Saturday, September 3,
10AM - Two 250 foot tracks in covered arena. Pro stock $450 minimum to
win, Super Stocks $450 minimum to win, 16 Stock Altered $250 minimum
to win, Outlaw $250 Minimum to win. There will also be 4 Tri-County
classes: 14hp Stock class, 12hp Stock Altered, 16hp Stock Altered,
20hp Twin Stock Altered (for those rules
http://www.geocities.com/tricountypullers )

A big thank you to the Lakeshore Pullers of northeast Wisconsin for
putting on a great event this past weekend at Brussels.  To Gordie,
Beecker, Tom, Chuck, and all the lady's that helped, the Teachers Pet
Pulling Team would like to say thank you.  We'll see you in Plymouth.

Matt Kaster

Adam Jannene

indoor tractor pull in farley Iowa  on April 16th  go to this
website for more info
http://www.geocities.com/americanminipuller/SpringNationals/index.htm
l

JUST IN !!! Brand new small block Kawasaki hi-rev pushrods that
replace our previous style. These are a new for 2005 lightweight
design that is a magnatude stronger than the wimpy stock pushrods
and lighter than our old design. They work great with high revving
engines and big lift cams. If you are pulling an FD620D water-cooled
Kawasaki 18-20hp twin in a modified-no rpm limit type class then you
need these. Must be used in conjunction with our hi-rev valve
springs. These are field tested to over 9,000rpms. Complete matching
set of pushrods and valve springs for your engine is only $80.00
plus UPS ground shipping. Call 276-236-5305 and ask for Frank. Also
available for 23-29hp Kawasaki Big Block. Please specify.

The rod will fit a 12. I mentioned going with a 14 simply because you
pick up some cubic inches.

so your rod is for a 14hp? what piston would i need? will a stock crank be ok? i
can have a fly wheel made from my macheneist what weight you think ,im new at
building these but am very capeable just dont have lots of $ like lots of guys
thanks Roger

dvogtvpe <no_reply@yahoogroups.com> wrote:

you need to match them to your piston pin hieght and stroke. they
won't work with a stock piston. but if you're building an altered
you'll want to change the piston anyway. its hard to find used stuff
for a 12hp altered, they aren't that common.





---------------------------------
Yahoo! Groups Links

    To visit your group on the web, go to:
http://groups.yahoo.com/group/gtpullinginwisconsin/

    To unsubscribe from this group, send an email to:
gtpullinginwisconsin-unsubscribe@yahoogroups.com

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




---------------------------------
Do you Yahoo!?
  Yahoo! Mail - Find what you need with new enhanced search. Learn more.

[Non-text portions of this message have been removed]

you need to match them to your piston pin hieght and stroke. they
won't work with a stock piston. but if you're building an altered
you'll want to change the piston anyway. its hard to find used stuff
for a 12hp altered, they aren't that common.

its our altered stock up to 15hp i have 3 -12 hp kohlers to play with what r
your rods for?

dvogtvpe <no_reply@yahoogroups.com> wrote:
what class are you building for? there aren't to many places to run a
12 competitivly. you may want to consider just going to a bigger
engine. I have used rods, 5.968 & 6 in.





---------------------------------
Yahoo! Groups Links

    To visit your group on the web, go to:
http://groups.yahoo.com/group/gtpullinginwisconsin/

    To unsubscribe from this group, send an email to:
gtpullinginwisconsin-unsubscribe@yahoogroups.com

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




---------------------------------
Do you Yahoo!?
  The all-new My Yahoo! – What will yours do?

[Non-text portions of this message have been removed]

what class are you building for? there aren't to many places to run a
12 competitivly. you may want to consider just going to a bigger
engine. I have used rods, 5.968 & 6 in.

looking for some used performance parts


---------------------------------
Do you Yahoo!?
  Yahoo! Mail - 250MB free storage. Do more. Manage less.

[Non-text portions of this message have been removed]

looking for performance parts to get my son in the top 3 at least no
cant afford a 3000$  engine thanks Roger

someone from the club involved can correct me if I'm wrong but I
believe its not happening this year.

Is there going to be a spring 2005 pull @ Pebble Ridge again?

I am wondering if any one can help me find the engine specs on all of the engine
manufacturers--i.e. torque rpm load/unload torques and rpm's etc. such as
tecumseh--kohler--briggs--onan,etc I have gotten a few from some of their
websites but nothing that is very comprehensive. tnx--Bud

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]

Rock County Pullers has a new website for everone to look at. The
site is    www.geocities.com/rockcountypullers/
The website has all of our upcomming pull and dates along with all of
our club and class rules. If you have any questions email us
at rockcountypull@...

Everyone have a great and safe pulling season.

Thanks.it was fun, especially since I havent pulled since 10/2002.  I hope the
trend continues.
   ----- Original Message -----
   From: dvogtvpe
   To: gtpullinginwisconsin@yahoogroups.com
   Sent: Wednesday, April 21, 2004 12:21 PM
   Subject: [GT Pulling In Wisconsin ] Pebble Ridge


   Dennis , talked to Charlie & heard you guys did real good in PS &
   single cyl SS. Congratulations!



------------------------------------------------------------------------------
   Yahoo! Groups Links

     a.. To visit your group on the web, go to:
     http://groups.yahoo.com/group/gtpullinginwisconsin/

     b.. To unsubscribe from this group, send an email to:
     gtpullinginwisconsin-unsubscribe@yahoogroups.com

     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]

Dennis , talked to Charlie & heard you guys did real good in PS &
single cyl SS. Congratulations!

Last year there was a pull in St. Croix Falls,WI.
I couldn't make it to that one and I was wondering if there will be
any others
North of Eau Claire this year.  Thanks

W.G.T.P. will be having the Pebble Ridge Spring Shoot Out Once again!
April 16th through the 18th all are welcome to come and pull.
For more info go to www.wgtpinc.org

Need a Holley Black fuel pump for alcoho and a low pressure regulator
Thanks
John

Need a pair of Fine Spline axles and HD carrier.

We just started this site and it isn't finnished yet , but will be in
a week or so.There is a small photo's section and soon we will have
our Club's Pulling rules as a printable version in the files section.
http://groups.yahoo.com/group/Dakotalawnmowermotorsports/
Enjoy!
Mike in N.D.

just thought i would let anyone interested know that AMPI will be
having a pull in anamosa iowa on oct 5th it starts at 11am and is
on dirt.this pull is always a good one so don't miss out
http://www.geocities.com/americanminipuller/index.html

just thought i would let anyone interested know that AMPI will be
having a pull in anamosa iowa on oct 5th  it starts at 11am and is
on dirt.this pull is always a good one so don't miss out
http://www.geocities.com/americanminipuller/index.html

If anyone is interested in LAWNTEC tires call me now for intoductory
pricing. 920-533-5340 Don Vogt

I'll be placing my first order soon and a down paymant now on a pair
of LAWNTEC's you will get a special introductory price.
http://www.geocities.com/dvogtvpe/VPE.html

in Wisconsin you can save shipping costs also , or if you pick up at
a NQS pull

There will be a NQS Pull @ Tiffin, Ohio Saturday, August 30. Rain or
Shine, Two 250' tracks in covered building, $2300 in added monies.
The classes will be: Pro-STock, Supers, 30CID, 16 S/A on Alcohol, and
a 16 S/A Gas or Alcohol class, Tri-County Rules Classes; 20hp S/A
Twins, 12hp S/A, 8hp S/A, 14hp Stock, 16hp S/A. For more information:
http://www.nqspulling.com/tiffin_flyer.htm
http://www.geocities.com/tricountypullers
Mike

In a message dated 6/10/03 12:50:46 PM Central Daylight Time,
jdg_rit@... writes: > I have a 12 hp stocker which runs at 4000. I have
single cut
> Firestones and a 13" hitch. I run in 1st gear all the time, but lately I
> have seen some guys run in second gear. I tried that once and ran out or
power.
> What size gears should I replace the 2nd gear with? Thanks for the help.
> Jarodd
>
Try the 16 tooth second gear. They came in the early Cub Cadets.


[Non-text portions of this message have been removed]