you'll want to line it up as close as possible , the driveshaft
conectors are somewhat forgiving so it don't have to be perfect . the
1100 is a nice tractor to start with you can always upgrade it to a
driveshaft & gear drive rearend , yours should have a right angle
gear box with a belt going to a 4 speed pearless rearend . the
material you're choosing for mounts sounds good .

Hi, I just bought an older 1100 cub cadet this last weekend for my
son to pull with. It came with a blown 11 hp briggs. I want to
install a k301s kohler engine. do I install it so it lines up with
the drive shaft, OR do I install the engine differently? Also I am
installing it with 2 pcs of 2" x 1/4 flat stock,,,Am I going in the
right direction? I am going to build wheelie bars and a adjustable
hitch myself with plans found on the net. We are thinking of pulling
in the Walworth County Fair in Elkhorn WI on Sunday before Labor Day.
Then in Marengo this fall if they are going to have the pull again
this year. Right now we are just getting started and are going to be
sorting things out so ANY and ALL help will be greatly appreciated by
me AND my 13 y/o son. Thx in advance. Rory and Brandon

900# stock class @ 165' and 1000# stock class @ 140'

Also theres a new group up in the Michigan UP to pull with , they
have a few pulls on their schedule this year

Stevens Lake Lawn Tractor Pullers Inc.

Les Richer President e-mail slltractorpullers@...

June 29th Flat Rock
July 4th  Gladstone
July 20th Special event in Rock
Aug 3rd   Flat Rock
Aug 31st Rock

these pulls are around the Escanoba area

Rock County Pullers is working on a new web site , you can check it
out a www.rockcountypullers.org . looks like they are just getting
started on it .

I would consider starting with a different engine . the KT was not
very reliable in stock form & there are not any hi performance parts
available for them such as rods cranks ect. . it appears from
whatI've seen ovwer the years in twin cyl. flat heads you need more
cubes than the flat heads have . the PS/SS flat heads are at 50.5.
I'ld consider using the K582 twin if you want a flat head or check
the rules out with the club you pul with & look at one of the new OHV
twins .  Lacota makes a fair amount of parts for these engines .
theres a link for them in the "bookmarks" in the sidebar to the left.
if you want to do traveling consider building a single . rules in the
pro stock class are very consitant from state to state & club to
club .

what can i do to modify a kohler kt series1 twin cylinder engine to
run it in the modified and super stock clases? Besides bored
cylinders and carb mods.?-thanks-

if anyones intersted in attending or pulling with WGTPA they can
check the schedule at www.wgtpinc.org . rules , scedule , and contact
info is available there.

If any of the other organizations would like to have a schedule
posted feel free to post it or send it to me & I'll post it

thanks

Time to sell some parts(new crank, recast carb, vogel 1.2 super carb
to see photos go to the link listed.
http://www.wgtpinc.org/for_sale.htm

Simplicity pullers only~please e-mail me for more info. on the
challenge-a7117puller@...

--- In gtpullinginwisconsin@y..., "barneveld_menace" <djenks@c...>
wrote:
> Unfortunately I won't be able to go to Des Moines, but my tractor
> will be there.  Michael and Christopher will be sharing the driving
> duties.


So they get to beat the you knw what out of it ? ;-)

Unfortunately I won't be able to go to Des Moines, but my tractor
will be there.  Michael and Christopher will be sharing the driving
duties.

Good Luck to all going to Des Moines this year, have a safe trip

Congratulaions on your PS win in Princeton. You made Photo Joes page
to. Good Luck in Des Moines

looks like this will take some getting used to !

The entry forms are out for Des Moines.Dates are
Friday March 22 at 6PM and Saturday Mar.23 at 10:30 AM.
Friday's classes are :<br>1050 stock<br>1050# WGTP Super
Stock<br>1150# Sportsman's mod.<br>1350# sportsman Mini
Rod<br>SATURDAY:<br>850#limited stock<br>1050# S/Alt.<br>950# S/S(30
cube)<br>1050 S/S(50 cube)<br>1050#sport stock<br>1200# super
mod<br>1450# Open shootout<br><br>For additional info or entry
forms please email:<br>Blshef@... OR
hrdcdrpulling@...<br>Phone # 608/783-0579 OR 608/526-9376 (7-9 PM only
please)

Wanted: ANY Simplicity parts and attachments for the 7100'series, AC900 series,
Massey Ferguson 2800 series. Including KT17/19 series2 engines/parts.

I am putting a 16 hp 1988 flathead briggs in a
1200 series cub. I cut the frame down 4 inches to line
the engine up with the cutch and its still doesn't
line up. What do I need to do to get this engine to
line up with the clutch? I have a midwest clutch in
the tractor. How do I get this engine mounted to the
frame????????? please help...

they will be running a stock class & a 48 cube class in Springfield IL. on
Saturday Feb. 23 as part of the NQS class's <br>for a entry form & rules go to
www.nqspulling.com

The only thing I know of is Des Moines Iowa pull
in april if they have it this year . the rumors I've
hear they will but its not a given yet . only other
pull that ran them was Bloomington and they won't have
pulls there anymore from what I've been hearing

we are from a club in east central iowa<br>wondering if any indoor pulls coming
up,that also<br>include car engines and bike engines,if so please<br>reply with
any info<br>thanks

North Dakota Winter Show March 13<br>classes include altered, sport, pro, super,
800cc 1500cc motorcycle-snowmobile, 4cylinder atomotive<br>email
glschoeruswest.net or 651-437-8291

i am looking for a proven stock class cub cadet<br>puller

congratulations to Mike Aschliman on his win in
the Super Stock class and a 4th in Pro Stock at the
Columbia , MO. NQS pull. Jim Vogt also had another strong
finish at 15th in the Super Stock class , there were
close to 100 entrys in the super stock class

Some of you probably already know this but for
those that don't Yahoo is doing away with the Yahoo
clubs . From what I've been reading they will
autmaticaly switch all Yahoo clubs to the new Yahoo groups.
I'll keep you posted if there are any changes.

congratulations to Jim Vogt on his Pro Stock Win & to Chad Gruber for his win in
the twin , overhead class . way to go guys !

Me? Plow day? I'd like to but can't get off of
work on a Saturday now...that really bites! Too bad,we
could show 'em what some 26-12x12's could pull,huh?
Wish I could go....hummmm,how many sick days(?) We'll
see. It woild be great to meet the gang down
there,especially the I-94 guys.

Thanks Jim . Feel free to post your Lakeshore
Pullers schedule when you get it & any rules changes you
make . also it would be nice to have a club cantact
person listed . <br>are you going to Plow Day Jim ?

Thanks for opening this new site Don;it's
something that all of us here in WI needed. A reminder to
other pullers that this is a good place for all WI
based pullers to keep each other up to date on all of
the events,meetings etc. Also we will be able to swap
ideas and offer parts and stuff for sale (or wanted to
buy)

Welcome to the Yahoo! Message Board for GT Pulling In Wisconsin