I have a k301 block that is bored for what I presume is a 10-hp piston and it has counterweights. I don't have the crank. Am I correct in thinking that this...
Ok, but what will a 12hp block take??? its already bored .030 over I found out(someone rebuilt it and blew the rod fairly quick!!)anyways,what will this thing...
... Marty, you just may have the K301 block that has the 10hp bore. You CAN bore theat block out to a 12hp piston size & use the 12hp rotating assembly then....
... Jon, you'll be happier (more power)if you go with a longer rod & a piston with a higher pin height if you're using stock stroke. A done well valve & seat...
If the block has K301 embossed on the PTO end, then it can safely be bored for a 12hp piston assembly. In a message dated 5/1/2009 11:40:44 AM Central Daylight...
It already is a 12 horse block. ... From: Marty Cline To: gardentractorpulling@yahoogroups.com Sent: Fri, 1 May 2009 16:16:08 +0000 (UTC) Subject: RE: [Garden...
I believe it's a thick-wall 10hp block. He wants to know if it can be safely bored to a 12hp. In a message dated 5/1/2009 9:58:13 PM Central Daylight Time, ......
MCLEAN CO POWER PULLERS 2009 SCHEDULE MYERS CREEK PARK CALHOUN, KY PRESIDENT : DALE MATTINGLY 270-302-4872 VICE PRESIDENT: SCOTT YECKERING 270-315-6356 PULLS...
Ok, thanks thats the info I was looking for!!! figured used cam was a money saver, and buy recast super cub carb, and the buy the rod/piston/crank from super...
The thick-wall 10hp K301 blocks works best for the 30 c.i. small bore/stroker engines. In a message dated 5/3/2009 11:21:42 AM Central Daylight Time, ...
Oh, ok...I figured you could cheat it and move the piston up or down .030 with a shorter/longer rod/piston combo and it would actually make it move up or down...
I'm using a 30-mm Kohler carb on a stock stroke, barely oversized piston K301 that's been ported and polished with oversized valves installed. I've bored out...
It's doing that because Brian Miller's straight-through design doesn't generate very much pressure drop at the main jet because there's no venturi effect,...
Jon, here's a couple of articles that explain the effects of long vs. short rods, also note that your cam should work with the other components as a package,...
Hi. I just joined and was wondering if anyone has a listing of pulls in Florida espedially north Florida. I recently bought a 16 horse Hydrostat MTD Farm King...
If your engine stock size valves, the angle on the main nozzle will need to face the throttle plate. But if it has oversize valves, the angle will need to face...
Because stock size valves (especially intake valve) won't allow the engine to create much vacuum through the carburetor. Therefore, with stock size valves,...
I am looking for a weight box for the front.Someone was suppose to make me one but not looking like its going to happen.I was thinking something like 8x8x6...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
