safety rules<br>1)each tractor will be inspected
by tech. committee.tech makes final decision for
which class tractor will run in.<br>2)helmets(half or
whole)must be worn by drivers during pull.helmets to be
d.o.t. rated,strapped and fit properly<br>3)no driver
shall bounce on seat or standfor any reason while
pulling<br>4)nothing to protrude more than 20" from front of tractor
frame on stock and no more than 20" from center line of
the front axle on modified tractors.nothing shall
extend more than 6" beyond the outside of rear
tires.<br>5)modifications of controls required to fit driver<br>6)all
modifieds MUST be equiped with an effective muffler
system.<br>7)all tractors must have sufficient sheilding of
belts,chains etc to deflect flying parts to the ground.all
vehicles functional brakes and steering.stock tractors
must have reverse,and all exhaust pipes(if other than
stock)must point up+/- 10 degrees.<br>8)all tractors that
dont have 4000rpm rule must have deadman
throttle.<br>9)all tractors other than A&B stock are requiredto have
a switch with a 1" ring that will kill engine and
fuel pump on back of tractor within 6" of center