My 01 V2 XL is for sale. IMHO, the best long wheel base ever, well maybe the Tour Easy is on par. Listed on BROL. Many Upgrades.$750, can ship. Andre`...
Aloha Phil, I was looking at your album and used your reference to the Dimension BMX head stem. I was able to get two of them for a reasonable price but I was...
You must have enough spacers to put the steering tube top about 1/8in below the top of the spacers. If the cap is resting on the steering tube it doesn't...
Since there are 25.4 mm / inch it seems that Joel and I have about the same spacing. My spacers may be 10mm. The spacers are availabe of the same internet...
It is possible to eliminate any spacers, if you measure the stack up and cut the head tubes. This is what I did (see "Cliff's Pix), not hard, but it requires a...
If the steering tube is cut the top cut must be very straight and and at 90 degrees to the tube. If not the bearings will never seat the same all the way...
Thanks all for the good information. I got a big surprise this morning, the UPS tracking site, which had said Christmas was going to be next Tuesday, revised...
... Thanks Phil. I am doing so. It's been a good assembly so far, At least nothing untoward. A few screws and nuts missing, easily replaced, otherwise, it has...
I used a standard tubing cutter bought from a home improvement store (actually, I have a few around for copper plumbing). Just make sure you get one that can...
... (actually, I have a few around for copper plumbing). Just make sure you get one that can expand to cut tubing that large. They are not really meant to cut...
I recently mounted a motor in the chainline of my Jetstream I. I reduced the usable gears to 8, but it works. (I wasn't sure I could make any of it work.) I...
Hi, I was checking out this system: http://www.bikeengines.com/index.htm It does no use the chain side, but the opposite side and mounts on the rear rack. Not...
most steering tubes are removable from the fork! ... store (actually, I have a few around for copper plumbing). Just make sure you get one that can expand to...
I just bought an old Hurricane (a.k.a. Jet Stream) and the top of the seat pokes me in the back. Is there a mesh seat out there that I can replace it with,...
Good for you actually taking it on and making it work! There is an exploding (figuratively, of course) technology development going on in the Radio Control...
I'm confused. The seat is rounded at the top. There have been weld failures that could cause the issue you are having. Is it possible the top mounting plate...
I'd guess he meant that the crossbar in the back is poking him, not the actual top of the seat. We've had some reports of that in the past, especially after...
Being a Hurricane, I'd bet this is a solid, no slot, seat. There were very few bikes sold under that name. A new seat might be in order anyway. Andre`...
Didn't the old padding-over-aluminum seat have a rather sharp hook at the top? I've thought about replacing my FRP with a wooden seat like the one from Atom...
... spend another 40 and buy something that you can use in the future with out reservations. The EL 530 gives some clarity, yet if you are riding around at...
I've been following some of the Cree light options. They make a model for bicycles but it would not be difficult to adapt a flashlight yourself. The nice...
Dear friend, Hope you everything goes well. I find a good company to buy electronic products recently.Now it is under sales promotion.They provide the...
Yesterday afternoon I was on my way home from work when a driver ahead of me suddenly moved to the right side of the lane and stopped, apparently to parrallel...
Well, that sucks!? I didn't think it would be possible to make a trike flip/somersault...how fast were you going and do you you have the stock brakes that...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
