"kkluckhohn"

You might want to check with a guy called 'Trikebldr' over on the
Catrike Forum ( http://catrike.yuku.com/ ) as those pictures are of
his trike. It is very difficult to get rid of all the chain tubes
with out putting some kind of protection on your frame, other (more)
idlers have been used but that tends to get expensive and noisy.
It's been proven that the easiest and most efficient way to handle
the situation is correct chain tube managment. If you go to the
Catrike Forum and search 'chain tubes' you will probably get more
information than you need. Or just ask the group, most are pretty
friendly.

David Von Stein


--- In TeamCatrike@yahoogroups.com, "Tom" <shamansdream@...> wrote:
>
> Here are some telling images:
> http://www.flickr.com/photos/7789950@N05/sets/72157604270189159/
>
> --- In TeamCatrike@yahoogroups.com, "kkluckhohn" <kkluckhohn@>
wrote:
> >
> > I recently installed a TerraCycle Return Idler after one of my
chain
> > tubes 'wiggled' loose, and now the return chain is rubbing on the
> > frame. I have come up with a temporary solution, but I was
wondering
> > if anyone else has come into this problem, and if they have what
was
> > their solution? I am trying to stay away from chain tubes, but
if I
> > have to I will install a small piece right at the frame to keep it
> > from rubbing.
> >
> > I am considering adding an idler up towards the front, however I
am
> > unsure if it will make a large enough difference. Does anyone
have
> > any suggestions?
> >
> > --Kevin
> >
>