Competitive Mode is a must

Gary R. Bowler
G.R.Bowler,Inc.
2261 Lake Road
Ontario, NY 14519
315-524-8750 NY Office
800-524-9570 24/7 Service
585-233-9891 Cell/Blackberry
www.grbowler.com
-----Original Message-----
From: RCCTrackers@yahoogroups.com [mailto:RCCTrackers@yahoogroups.com] On
Behalf Of smackler@...
Sent: Thursday, September 03, 2009 9:01 AM
To: RCCTrackers@yahoogroups.com
Cc: Mitch Evans
Subject: RE: [RCCTrackers] More Open Trackers

Get that computer sorted out so tyou can run in "competitive mode"...

---- Mitch Evans <mitch-evans@...> wrote:
> Gary,
>
> Thanks for the offer but I'm going to keep it simple this Monday and not
do anymore tweaking for a while...alignment and reacquaintance with these
new bars will keep me busy.  I'll keep an eye on the tires this time and see
what there doing thanks for the tip.
>
> --- On Thu, 9/3/09, Gary Bowler <gary@...> wrote:
>
> From: Gary Bowler <gary@...>
> Subject: RE: [RCCTrackers] More Open Trackers
> To: RCCTrackers@yahoogroups.com
> Date: Thursday, September 3, 2009, 7:10 AM
>
>
>
>
>
>
>  
>
>
>
>
>
>
>
>
>
>
>
>
>
> I got a tire temp pyrometer at the track that
> stores 10 sets of 12 readings to check tire pressure and camber settings
at the
> track. I had LG Motorsports do a check for me when Lou was out on the
track.
> They used my pyrometer to check both of our cars one after the other. I
felt
> like a racer pulling into the pits hot and having a race team check my
tires
> and burn out back on the track. I found I was running too high a pressure
in
> the left rear. High speed right turns were increasing the left rear higher
then
> the other three tires. So I lowered the left rear before the next session.
Much
> better results in turn 1 & 2. Was able to pass Craig on that outing. Craig
> said that I had a fast car. You talk about a compliment, was very happy
with
> the results of my coilover project. You can use it for Monday if you like.

>
>  
>
>
>
> Gary R. Bowler
>
> G.R.Bowler,Inc.
>
> 2261 Lake Road
>
> Ontario, NY 14519
>
> 315-524-8750 NY Office
>
> 800-524-9570 24/7 Service
>
> 585-233-9891 Cell/Blackberry
>
> www.grbowler. com
>
> Siemens Energy & Automation Solution
> Partner
>
> Allen Bradley Systems
>
> Wonderware HMI Software
>
> Emerson Marine Systems
>
>
>
>
>
>
>
>
>
>
>
> From: RCCTrackers@ yahoogroups. com [mailto: RCCTrackers@ yahoogroups. com
] On Behalf Of Mitch Evans
>
> Sent: Wednesday, September 02,
> 2009 11:16 PM
>
> To: RCCTrackers@ yahoogroups. com
>
> Subject: RE: [RCCTrackers] More
> Open Trackers
>
>
>
>  
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Looks like a good bar but I don't like the splined
> ends and front adj is not necessary..rear is the one to adj..GMs T1 one
piece
> matched set for our cars
>
>
>
> I'll let you know how the T1 bars work out Monday..Friday I'm getting
> alignment so everything should be close to best can be.
>
>
>
> --- On Wed, 9/2/09, Scott Mackler <smackler@rochester. rr.com>
> wrote:
>
>
> From: Scott Mackler <smackler@rochester. rr.com>
>
> Subject: RE: [RCCTrackers] More Open Trackers [1 Attachment]
>
> To: RCCTrackers@ yahoogroups. com
>
> Date: Wednesday, September 2, 2009, 10:34 PM
>
>  
>
>
> see attachment!
>  
>
>
> From: RCCTrackers@ yahoogroups. com
> [mailto:RCCTrackers @yahoogroups. com] On
> Behalf Of Scott Mackler
>
> Sent: Wednesday, September 02,
> 2009 6:38 AM
>
> To: RCCTrackers@ yahoogroups.
> com
>
> Subject: RE: [RCCTrackers] More
> Open Trackers
>
>
>  
>  
>
>
>
>
> Most guys who have the TI bars love them. Seem to start out
> with them on "middle settings".  Go out and see how it
> handles, adjust if necessary.
>  
>
>
> From: RCCTrackers@ yahoogroups. com
> [mailto:RCCTrackers @yahoogroups. com] On
> Behalf Of Mitch Evans
>
> Sent: Tuesday, September 01,
> 2009 10:52 PM
>
> To: RCCTrackers@ yahoogroups.
> com
>
> Subject: Re: [RCCTrackers] More
> Open Trackers
>
>
>  
>  
>
>
>
>
>
>
> Scott,
>
>
>
> Congrats!  
>
> Lou on your covers, that's cool!
>
> Glad things went well, I like good news!
>
>
>
> What happened to brakes?
>
>
>
> You mean Oct 7,8 right?
>
> Chin is there this coming Monday 7th I'm doing that one just
Monday...they
> soloed certified me last year..need no instructor at all..my favorite
> way..My new bars are a love hate relationship, almost took them
> out..loosened up the bushings, they were too tight, and getting track
> alignment Fri.
>
> Chin gives 3 hrs/day so I'll have plenty of time to get used to car
> setup..or really total it out!
>
>
>
> --- On Tue, 9/1/09, semackler <smackler@rochester. rr.com>
> wrote:
>
>
> From: semackler <smackler@rochester. rr.com>
>
> Subject: [RCCTrackers] More Open Trackers
>
> To: RCCTrackers@ yahoogroups. com
>
> Date: Tuesday, September 1, 2009, 8:46 PM
>
>  
>
>
> Just
> back from the Glen. Gary B. & I passed the
>
> Open Track" certification with Trackmasters. In honor of the event, I
> lost my brakes, just like I did when I graduated from Novice to
> Intermediate. Only difference is this time I knew what to do!
>
>
>
> FInal event of teh year is Sept 7th & 8th. If I can sort my brakes out
> in time, I'm there!
>
>
>
> Got my valve covers signed by Lou Gigliotti ;-)
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>



------------------------------------

Yahoo! Groups Links