Sold, thanks.

Subject: Truckload sale of frames, wheels, bike rack, forks, etc


Frames, forks, wheelsets, bike stand, saddles, and parts are all included in
this pick-up only huge lot of items.

This pick-up only bike part bonanza includes:
*Pogliaghi frame and fork
*Bianchi frame and fork
*Set of Campagnolo Omega 19 rims on Shimano Ultegra hubs
*Set of Mavic Open Pro rims on Shimano Ultegra hubs
*Set of Mavic Reflex rims on Shimano Ultegra hubs
*3 Specialized Body Geometry Comp saddles
*Well-used Oschner steel fork
*Like-new (maybe is new) chromed fork
*NIP Promax seatpost
*GrandstanD bike rack
Details and pics below:
===========================
56cm Pogliaghi frame and fork
This beautiful Italian-made Basso-built Pogliaghi classic lugged steel frame
and fork is painted gloss black with white decals outlined in gold. The steel
fork has a 1" threaded steel steerer (includes a Stronglight headset) and a flat
fork crown with Pogliaghi engraving in the crown.

The frame measures 56cm c-c with a 56cm top tube. The head tube length is
138mm, rear drop out width is 126mm, and the bottom bracket shell measures 70mm
wide. The steel tubing is Basso Tube Concept Super Light Cr Mo 4 SX custom made
for Basso. There are two sets of water bottle bosses, a braze-on front
derailleur tab, down tube shifter bosses, and pump peg, The rear brake cable is
routed at 7 o'clock on the top tube. The rear dropouts are horizontal (adjusting
screws are not included) and are stamped Pogliaghi.

This frame is new, and was partially built up but never ridden. There are some
matching paint touch-ups to a very few paint chips on the frame and fork, but
being gloss black it is hard to see them. The frame and fork have been
completely treated inside the tubes with Boeshield T-9 rust prevention spray.
Includes a very nice installed Stronglight headset.
===================================
Bianchi Trofeo frame and fork
This Bianchi Trofeo frame with matching fork is in very good condition and
will be a beautiful looking and riding bike when built up. This frame measures
55.5cm from the center of the bottom bracket to the center of the top tube, or
56.5cm from the center of the bottom bracket to the top of the top tube, with a
55.5cm top tube and a 133mm headtube. The frame and fork are painted Ferrari
Racing Red with bright white decals outlined in black. The frame is fully lugged
using Bianchi Exclusive Dedacciai Zerotre steel tubing. The downtube is ovalized
at the bottom bracket shell for both stiffness when climbing and sprinting, and
for strength. The fork is a unicrown threaded model with 1 inch steerer. This
frame and fork were made in Italy. The rear chainstays measure a longish 42cm
for comfort and stability, with vertical dropouts that are 130mm wide. This
frame uses a clamp-on front derailleur, has two sets of water bottle bosses, and
the rear brake cable is routed through split stops on the top of the top tube.
There are some touched-up paint chips, and of course a mark where the clamp-on
derailleur was installed, but there are no rust or dents as this frame and fork
are in very good condition. All of the tubes and fork have been treated on the
inside with Boeshield T9 rust prevention spray. There is a headset installed,
but it is a no-name model and is too rough to use unless you want to try and
overhaul it.
===============================
Clincher wheelset built with Shimano Ultegra hubs, Campagnolo Omega 19 dark
anodized rims, what look to be DT spokes, Velox rim strips, no skewers. They are
28 spoke front and back in very good condition with less than 200 miles on them.
=================================
Clincher wheelset built with Shimano Ultegra hubs, Mavic Open Pro SUP blue
anodized rims, blue nipples on what look to be double butted spokes, Velox rim
strips, and no skewers. They are 32 spoke front and back in good condition with
less than 500 miles on them. Rear wheel has one dinged place on it from hitting
a pothole.
==========================
Clincher wheelset built with Shimano Ultegra hubs, Mavic Reflex SUP blue
anodized rims, what look to be double butted spokes, red IRC tires, and no
skewers. Believe these were built by Wheelsmith. They are 32 spoke front and
back in good condition with less than 1000 miles on them.
===========================
Three Specialized Body Geometry Comp saddles, Manganese rails with adjusting
marks for accurate set-up, older models: 1 new, 1 test ridden, 1 used.
==============================
New in package Promax black seatpost, alloy CNC cut, 30.0 x 350, micro adjust
seat clamp.
==============================
GrandstanD bike rack. This rack is made of lightweight and strong ABS plastic
which ensures portability and durability. It keeps your bike in place while
storing, doing repairs or while washing. It can be used by kids as well as by
adults. It holds all types of bikes from BMX to road bikes to mountain bikes. It
also has a wide footprint grip for extra stability. Was put together and may
have been used, but looks to be in very good condition.
================================
Oschner steel fork, used and in not very good aesthetic condition but looks to
be fine mechanically, 180mm steerer.
==============================
Chromed steel fork, looks to be new or new take off, 170mm steerer.
===============================

Only $500 for all of these items picked up in McAlester.

Thanks,

Frank

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]