Brian, I plan on sticking with 96V for this year. I don't see shattering your time as a possibility, but might be able to better what Lawless did with AGNuS....
I'm happy with the 96 volt record we set Still have a few tricks if any one breaks our record Hope to bring ac bike and race against you am shawn Mainfuse Sent...
Jack, If you change the gear ratio from 3.36 to 4.56, several things may happen. With the deeper gear ratio, you should launch harder, and possibly more wheel...
Darin, I have been over this gear change in my head over and over and over. I have talked to many drag racers. I don't think Anyone Really knows what will...
Jack, Going with smaller tires does the same thing as going with a deeper (numerically higher) gear ratio. So if going with smaller tires did reduce the amp...
just back from races, we turned a 11.693 @ 104 mph in the 1/4 mile, not bad for a 96 volt motorcycle. we changed our gear ratio from 4.176 to 1 , (101mph) to...
Brian, If your 60' time was poor, how was your 1/8 mile time? What MPH did you gain from the 1/8 mile to the 1/4 mile? I'm assuming that your 1/8 mile time...
Jack, congrats on the great run ! I'm amazed that your getting these times and speed at 96volts. Gives me hope for my 156 volt set up. Keep us updated. On...
HI Darin, with old gearing 17/71-------new gearing 17/60 best time was 60'---------1.745------------------1.899 330--------4.602------------------4.854 ...
Yeah !!!! now were talkin' Coming Soon!! NEDRA Smackdown Where you can Talk the Talk and Walk the Walk, but the Be The Man you gotta Beat The Man... ... From:...
Hey Mike. Right on! Just thought I would slip that last part in to help keep the trolls away. I'd like to welcome David Dymaxion to the NEDRA list. Chip...
Hi, I just joined this list. Many of you know my as Paul "neon" Gooch. I have built 2 EVs and am working (slowly :) on my 3rd, a '66 Datsun 411 Wagon. This one...
just look at the nedra records page to see who is going faster than you and get to it! mainfuse Yeah !!!! now were talkin' Coming Soon!! NEDRA Smackdown Where...
Keeping trolls away... What! Is DF here too? Ladies and Gentlemen, Let me says that I have been lurking on the EVDL for a couple of years, and as a gearhead I...
Good to hear from you Tom, I too seem to lurk a lot more than post, I am just having so much fun getting back into racing that it's all I think about ! New set...
Yeah I like that last part too. "put up or shut up", heh heh :-) Or we send our motor dog to hunt you down with his Spartan spear, doh! Yes, welcome Dave and...
I hope so Please try and catch me Sent from my iPhone On Mar 6, 2008, at 8:52 PM, Mike Willmon <electrabishi@...> wrote: Brian, sounds like you˘re painting...
I would, but I'm working the four wheeled targets right now. Trying to get some of the bikers in the office interested in an EV bike build, one of the local...
Is there anyone reading that has experience enough getting cars with roll bars through tech inspection? Do I need to drill a hole somewhere where the ...
Hi Mike, I checked the 2008 NHRA Rulebook and there doesn't appear to be anything that says there needs to be an inspection hole drilled to verify the wall...
The instructions on a micro switch kit for the SW200 say to operate the contacts manually and ensure there is at least 0.015" gap left to go when the switch...
Hi All of you living in the land of the free, well at least on this list. I wanted to personally thank those of you who have joined partly in support of John...
Thanks for your message Roderick. This is all a result of the fallout from the EVDL. As far as the name change, as one of the moderators who created the forum,...
Mike You certainly don't want any additional loose parts bouncing around in your contactor. If it doesn't meet specs, get another one. Also, on an earlier...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
