Being a friend for several years I am upset by this loss. All of this stuff is precious to me as well. Remember, any of my BP stuff you need to borrow until...
In south central PA you are real close to Dixons in Kempton, near Kutztown. Take your rifle over there and let them take a look. There is the gun fair there at...
keep us posted! ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around ...
New listing: (See note below) ... 1/4" thick blade is 4 3/8" long. A2 tool steel blade. (Holds an edge better than 440c!) Full tang construction. Dark curly...
Hi folks: I am restoring a mid 19th century English 12 ga. double percussion gun for my boy, and have decided to replace the existing barrels. I haven't found...
John, Try Track of the Wolf. Here is their gun parts link: http://www.trackofthewolf.com/categories/catList.aspx?catID=14 I know that there are other places...
Try Buckeye barrels--it's run by Barbie Chambers. Go to www.flintlocks.com for info. Muzzleloaders@yahoogroups.com wrote:There is 1 message in this issue. ...
Hey, I just bought a new muzzleloader this past week and was looking for anyone in North Carolina that new of any good hunting grounds or just places to shoot....
Dixon's Gun Fair is this weekend in Kempton, PA near Allentown and Kutztown. This is a great event with muzzleloading gunmakers from all over showing and...
I am considering peddling the GPR to finance a rifle kit in .45. Since Cabelas sells them now for $530, I thought $350 would be appropriate. It is no longer as...
If I hadn't just BOUGHT one...............lol. Sounds very nice. ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo!...
Hey there, and welcome to NC! I'm up in the Winston-Salem area, and looking for the same thing. I hunted a good bit growing up, but work, family, etc., led me...
I bought a new inline today. I was hoping for some opinions. It's a New Frontier Bear Tooth Magnum, in 50 cal. The price was right and I was really looking for...
I recently acquired a Traditions Trapper pistol in .50 cal. with flintlock ignition. Unfortunately, the manual is just a parts diagram, with no suggested...
Hi Thomas- First of all you need a little faster powder for the shorter barrel, FFFg. I use 40gns in my Lyman pistols and that works very well, a mild and...
Try this website www.investarm.com/eng ... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam...
This year I purchased a used flintlock Hawken style 50 caliber rifle (1 in 48 twist) that was originally marketed by Cabela's. It was manufactured by ...
I tried several loads at the range, including patched ball and 320 grain Lee R.E.A.L. maxi- ball conicals. The conicals sat plenty tightly when loaded, so...
I recently purchased a traditions rifle that was put together the same way.. it helps if you take out the breech plug and drill it out a little bit, while it...
... Al, The breech is coned, narrowing as it reaches the flash channel; same setup as the Lyman guns. When cleaning the bore, I reach this area by using a .32...
... Investarms is in either Italy or Spain, can't remember which offfhand. They are the manufacturers of the Lyman GPR & trade gun along with Cabellas similar...
When I finally realized what was going on, I was fortunate in that when I did get a patch all the way down the barrel (not with the ramrod), it came out pretty...
I have a TC Hawken (from the late 80's) and was thinking about installing a peep sight. Was wondering if anyone had installed the TC hunting style tang peep...
I have a Great Plains and use a Lymann 90 reciever sight that works well for long rang shooting. It takes a second to get the target ligned up before the shot....
I have a rifle with one of these installed. They are an accurate sight once you have them set up. If you are looking for a sight that you can easily change...
... TC Hawken stock, green mountain 54 with stock front bead and lyman 57 sml (mounted on tang which was pre-drilled and threaded). This set up works great. I...
My .45 T/C Hawken was recently stolen...however, it did have the aforementioned peep site on it. I wasn't all that happy with the sight. The peep hole is too...
Do you really need a scope if you are shooting 4 inch groups with open sights? Also, in some states, mounting a scope on a muzzleloader makes it illegal to ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
