Steve,

All are sound but quite well used.  I replace my sails before they
get too stretched but I like to get a few seasons use from them.  
Ages range from 10+ years to about 4.  Sheeting angle of course
depends on position of tracks and blocks.  On the Micro18 the
sheeting angle is typically to make a lot of tension down the leech.

Dave

--- In MicroClass@yahoogroups.com <mailto:MicroClass%40yahoogroups.com> , Steve Culpitt <sculpitt@...> wrote:
>
> Dave
>
> What condition are they in and how old?
>
> Kind regards
>
> Steve
>
> Oh and what sheeting angle?
>
>
>
> On 29/8/07 15:24, "David" <dave.waters@...> wrote:
>
> >  
> >  
> >  
> >
> > Hullo Jimmy,
> >
> > I have a number of redundant Micro 18 sails, including jibs.  If
you
> > still need a jib (or any other sail) please let me know.  I live
in
> > Colchester, Essex and I sail my boat on the Stour at Manningtree.
> >
> > I'm not familiar with the Microdsail, but if you can give me the
> > measurements I could check them against the Micro 18 sail(s).
> >
> > Regards,
> >
> > Dave
> >
> > --- In MicroClass@yahoogroups.com <mailto:MicroClass%40yahoogroups.com>  <mailto:MicroClass%
40yahoogroups.com> ,
> > "jimmyfuller0" <jimmyfuller0@>
> > wrote:
> >> >
> >> > --- In MicroClass@yahoogroups.com <mailto:MicroClass%40yahoogroups.com>  <mailto:MicroClass%
40yahoogroups.com> ,
> >> "jimmyfuller0" <jimmyfuller0@>
> >> > wrote:
> >>> > >
> >>> > > Good afternoon everyone.
> >>> > >
> >>> > > I am in need of a standard blade jib for a Microsail as i
only
> > have
> >> > the
> >>> > > genoa with a poor sheeting angle. It will be for cruising
use
> >> > perhaps
> >>> > > some racing dacron will do must be in good condition and be
> >> > suitable
> >> > to
> >>> > > sheet to the standard cabin roof fittings with barber
haulers.
> >>> > >
> >>> > > Thanks in advance
> >>> > >
> >>> > > Jimmy.
> >>> > >
> >> >
> >> > Hello anyone out there, if there is anyone out there?
> >> >
> >> > Just to create some life on the UK forum you are all abviously
out
> >> > there
> >> > having too much fun!! I am writing to tell you i have managed
to
> > get
> >> > a
> >> > Narwhal blade jib off a Proto in Austria which works superbly
and
> > I
> >> > was
> >> > pleasantly surprised at how quick it was to arrive on my
doorstep.
> >> >
> >> > If anyone else is in need of a new jib or suit of sails the
same
> > chap
> >> > has a full suit of Doyle racing sails cut for a carbon mast
(500
> >> > Euros
> >> > +postage) and a superb radial cut Narwhal headsail (200 euros
> >> > +postage)! Email me and i will forward your details to the
seller
> > for
> >> > the details, alternatively go to www.microclass.org on the
forum
> >> > under
> >> > sales and contact Christian yourself. There is a possibility
they
> >> > might
> >> > be sold allready but its worth a go.
> >> >
> >> > Jimmy
> >> >
> >
> >  
> >
>