My koupled P58 is now in the hands a new owner. It was a fine bike, but never my perfect fit. A 60cm P would be all the better. Thought I'd put it out there...
I had that headbadge on the hood of my 1982 Plymouth reliant K station wagon. On Sat, Nov 7, 2009 at 5:27 PM, Kogswell Cycles ... -- Tarik Saleh tas at...
took a while to upload shots photos of Wald basket mounted to fork crown and mid fork mounts http://www.flickr.com/photos/vandenbergs/sets/72157622755055742/ ...
From: jim.gourgoutis [jimg@yojimg. net] ... Jim, It's time for a trip to Paganos in Alameda: (1100 Lincoln Ave., Alameda CA 94501 • 510.522.1345) This is a...
This past August I crashed on my G2 P/R when a car suddenly cut around me right at the corner of a block to make a right hand turn. It was one of those...
... Further, getting that weigh positioned where it needs to be in an emergency stop involves the ability to quickly shift your weight behind the saddle as the...
Also, is there a plan for a konversion kit still? (Fork & rack kombo?) Read about it a while ago and would be interested in upgrading the ol' Schwinn Super...
Hi Bernie, Sorry to hear about your endo. I'm with the others that the difference in trail is going to make little to no difference. There is a MTB descending...
http://tinyurl.com/yeu6kgt This is link to photo of my SECOND 559 Kogswell. My first 559 Kogswell is set up as a city bike with Albatross bars and Nexus Red...
Stainless bolts are expensive and needlessly heavy. I use nylon screws instead. Much cheaper and much lighter. You can get them at any decent hardware store...
... Pretty nice! That front Minoura rack is pretty interesting -- never seen that before. Question: what's the fattest tire the 559 P/R will accept?...
Jim - I find that the Pasella 26x1.75 is about the widest tire I can comfortably run with fenders with the P/R G2 559 frames. Note - I really like this...
... I don't know but I wouldn't try it. I use them for plugging all the braze-on holes that **don't** have things attached to them such as the holes on the top...
... Hi, Justin. I have some 700C forks with the following specs: 1" threadless spaced for 59mm brakes w/ canti posts unpainted they would take a 32mm tire and...
Check out this 2-position fork end! http://img08.shop-pro.jp/PA01034/855/product/12219519_o2.JPG from http://tinyurl.com/yfeacs4 Zero or 38mm of offset. Hmmm....
... I think I do, but a waterjet-cut dropout (e.g. James Black's design) is likely to be both simpler and lighter, I reckon. That fork I linked to is a...
Jim, I can't get to the tinyurtl link right now, but I did see a photo ( on a friend of a friends facebook page) of what I think was that exact fork on a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
