Thanks for the pointer. However, my bike shop didn't know of anywhere to
get these super long. The standard long are about 19" overall (475mm), I
measured the ones on the bike now and got the following: lower run 17"
housing, 24" cable, which means the overall total housing length from the
brake is about 24". To boot, I thought the cable runs from the mfg were too
short, and caused kinks. So, can anyone point me to the source for these
super-long dual cables?

Walt


On 6/8/07 9:10 PM, "mtnbikeriders" <rl@...> wrote:

> Walt,
>
> Any bike shop can sell you that part. I believe this is what you're
> talking about.
>
> http://www.bikepartsusa.com/product_info.asp?f_c=cable&cp=7&p=01-90737
>
> RL
> --- In KMXKartsowners@yahoogroups.com, Walter Roscello <wroscello@...>
> wrote:
>>
>> Dave or whoever else has parts:
>>
>> I have a K class (one of the first in the US) for my son. The right
> brake
>> lever goes through a splitter to produce two cables, one for each
> front band
>> brake. One of the brake cables frayed and broke.
>>
>> On disassembly, it appears that all three cables (one incoming, two
>> outgoing) are molded into a single ingot (like the cable end ingots on
>> normal cables). I thought it would be more of a holder for standard
> cables.
>> Anyway, it appears that to replace this cable I need to get the whole
>> assembly. Is this part available from anyone here?
>>
>> I can send a picture if needed for clarity.
>>
>> Walt Roscello
>> 2003 Catrike (for sale)
>> 2004 KMX
>> 2005 Burley Rumba tandem
>>
>
>