I wanted to publicly thank Marco and the mafia for setting up the cyclocross
clinic in DSM last Tuesday. Total sweetness to see 30-some people out taking a
stab at the second greatest sport ever (the greatest of course being competitive
Strip-Scrabble)!

I thought I’d put together a cheat-sheet collection of articles I found on-line
that may be of some help for any of you looking to make the jump into cyclocross
or for any of the already converted looking for a bit of an edge!

Enjoy,
Donny Quixote
DSM, IA
www.quixotecoaching.com



The following articles are in this e-mail:
RUNNING BARRIERS AND CARRYING THE BIKE by Patrick O’Grady
BULDING PORTABLE BARRIERS from www.bostoncross.com
CONVERTING YOUR ROAD OR MOUNTAIN BIKE FOR CROSS by Patrick O’Grady
HOW TO IMPROVE YOUR STARTS FOR CYCLOCROSS by Adam Hodges Myerson
RUNNING ECONOMY By Joe Friel
DQ’s CYCLOCROSS DRILLS by DQ (duh)

Now, I’ve “borrowed” most of these articles so it is only right to tell you
where I got them from:

www.bostoncross.com www.cycle-smart.com www.maddogmedia.com
www.ultrafit.com

Marco announced this earlier on the list… but if you’re planning on doing any
cyclocross at all and haven’t watched Adam Hodges Myerson’s Solutions for
Cyclocross DVD then you need to get on the ball. Marco plans on selling the DVD
at the Cross Mafia races as a fundraiser but if he runs out you can always get
them here:
http://www.cycle-smart.com/coaching/cyclocross.html

_______________________________________________

RUNNING BARRIERS AND CARRYING THE BIKE
by Patrick O’Grady

Getting off
Dismounts come in three flavors -- run-ups, roll-ups and full-tilt gut checks:

-- Run-ups. Shift into the gear you'll need at the top as you approach the hill,
hands on brake hoods or bar tops. Swing your right leg over the saddle; move
your right hand to the top tube, just in front of the seat post; then unclip
your left foot -- putting your weight through your right arm onto the top tube
-- and hit the ground on your right foot.

Once you're afoot and running, flip the bike onto your shoulder by the top tube
or the down tube, depending upon your size and style. More on this later.

-- Roll-ups. On an almost-rideable hill, stay on the bike until you start to
lose the momentum you'll need to hoist it on the fly. Swing your right leg over
the saddle, pushing down on the left pedal, then unclip at the bottom of the
stroke and jump off. Run a few steps with your hands on the brake levers or bar
tops, then shoulder the bike and beat feet.

-- Full-tilt gut checks. Many promoters use barricades to handicap mountain
bikes on fast or technical descents; they also add difficulty to flat courses.
Technique is at a premium during these high-speed dismounts; you can either gain
ground, or lose skin.

Start off slowly, with your hands on the brake levers, then add speed. This is
why 'cross racers reverse their brake levers -- rear on the left, front on the
right . It's soothing to be able to modulate your speed as you charge toward a
16-inch-high wooden barricade in a half-dismount, with your left hand on a brake
hood and your right on the top tube.

As you approach, swing your right leg over the saddle, between the bike and your
left leg, and slightly forward. Place your right hand on the top tube and lean
back, with your weight through your right arm. Wait until the last possible
second, then unclip your left foot and land on your right.

Lift the bike with your right hand; your left remains on the bars or brake hood
to keep your wheels straight. Hurdle the barricade, set the bike gently on the
ground, return your right hand to the bars and leap into the saddle.

If conditions are particularly heinous, or if you're nervous, you can unclip
your left foot and approach a dismount with it simply resting on top of the
pedal. But premature unclipulation risks sliding off the pedal on bumpy ground,
or worse, clipping back in by accident -- leaving you locked into one pedal as
you barrel into a barrier at 20 mph. A well-drilled, last-minute release is far
preferable.

Keep your cleats and pedals well maintained, spraying them with cooking spray or
aerosol lubricant on filthy days, and practice, practice, practice.

Running with the bike
Shoulder the bike for extended runs, particularly when the going gets muddy.
Pushing it through the goo will gum up the works faster than a peace creep in
the Pentagon. Some 'crossers like to set the bike down between hurdles erected
in series, running with hands on bars and top tube. But the repeated lifting can
wear you out.

There are two ways to pick up the bike, and two ways to carry it (mountain
bikers whose bikes' main triangles are cramped by sloping top tubes may have to
try a third).

-- Picking it up, boss. If you're tall, try grabbing the top tube and palming
the bike, shot-put style, onto your shoulder. Snake your right arm around the
head tube to grab the left brake hood. Vertically challenged? Try using the down
tube to hoist the bike, then reach under it to the left drop. Mountain bikers
may have to reach over the top tube to grasp the down tube, then carry the bike
like a portfolio (try resting the saddle tip on your shoulder).

Keep your shoulder closer to the head tube than the seat tube for a comfortable,
upright carrying position (a shoulder pad liberated from a woman's sweater or
blazer helps, too). Lean forward into run-ups, taking short, quick steps; if you
must run down a tricky slope, lean back a bit. You can open your stride somewhat
for a flat run.

-- Putting it down, boss. Hold the bars with your left hand, then take the bike
off your shoulder with your right hand on either the top tube or the down tube.
The latter lets you sort of shrug the bike off and into your hand, and may feel
more natural. But set it down gently; a bouncing bike is nothing you want to
leap onto if you hope to reproduce.

Getting back on
Put both hands on the bars (tops for the flats, drops for descents, levers for
everything else). Leap off your left foot, throwing your right leg over the
saddle; land on your right thigh, then slide atop the saddle. You'll probably
stutter-step for a while, but strive for the clean, one-step leap from left foot
onto thigh -- it's faster and safer.

Stab your right foot down for its pedal (a proper dismount should leave it near
12 o'clock). Clip in and stomp on it, then clip your right foot in as its pedal
comes around. Haul ass.

_______________________________________________

BULDING PORTABLE BARRIERS
Here are the plans to build your own portable barriers to train on (just like
the ones Marco uses). Perfect for learning to dismount, run, remount, repeat.
Terrible for learning to bunny hop.
http://www.bostoncross.com/portahurdle2.pdf

_______________________________________________

CONVERTING YOUR ROAD OR MOUNTAIN BIKE FOR CROSS
by Patrick O’Grady

Converting a road bike
Get rid of the bottle cages — you're going to be shoving your shoulder through
that main triangle for run-ups — and lose the frame pump and saddle bag, too.
Remove the pedals and replace them with whatever you're using on your mountain
bike. Don't forget your off-road shoes.

If you can, raise your stem a centimeter, or consider swapping your road stem
for one with a little more rise to it (while you're at it, you may want to add a
slightly wider set of bars). Lower your saddle by 1cm, and move your shift/brake
levers a tad farther up the bars for a more upright riding position. If your bar
tape is one of those slippery brands, consider something with a little more grip
to it.

At the other end of the bike, swap your corncob for a 12-27 or 11-28 and your
slicks for knobbies. Sew-ups are best, but clinchers will do, if you don't mind
the occasional pinch flat (a spare wheelset for the pit is an excellent idea for
such occasions). Vittoria Mastercross and Normal Cross are excellent
all-conditions fronts, with a file tread pattern; Wolber 28 Cross Extra or
Clement Grifo Neve are all-purpose rears, with an arrow-and-block tread.
Everyone I've seen on tubies lately is using Tufos, either the real deal or
their tubular-clincher, which is said to blend the best of both worlds. If
you're going with clinchers, the Vredestein Campo, Michelin Jet and Sprint, and
Ritchey SpeedMax are great. I like Continental's Twister Pro, too, but it's a
bit heavier than the others.

Your 53/39 crankset will do as is; snug your front derailleur up to the big ring
to keep your chain from bouncing off. If you've got $25 to spend on a 48-tooth
outer ring, and time to rearrange your front derailleur, replace that 53.

STI and Ergopower are the standard in 'cross, so you're good to go here, unless
you're still shifting from the down tube. Cheapskates, Luddites and gram
counters can go for bar-end shifters, which are nearly indestructible and
feature a friction option when conditions get iffy, and and aero' brake levers.

Consider rearranging your brake cables so that your rear brake is on the left;
it's nice to be able to modulate your speed when you're rumbling up to a barrier
in a half-dismount, with your left hand on the bars and your right on the top
tube. You may also want to add a set of the top-mounted brake levers from
Empella, Salsa, Radius or Tektro, which let you brake from the bar tops. Your
road pads will probably suffice for dry conditions. And when the going gets
gooey, the minimal tire clearance of a road frame is going to set you afoot in
short order anyway.

Radically converting a road bike
If you've got a beater bike to experiment with, ask a frame-builder to add
cantilever braze-ons front and rear. You'll appreciate the extra braking power
cantis provide in foul weather. Don't forget cable hangers and barrel adjusters
for your headset and seatpost binder bolt.

While the torch is hot, have your frame-builder move your old brake bridge up a
touch for more rubber clearance. Think about clipping the chainstay bridge out
while you're at it. Finally, you might add a "brake booster" to minimize any
extra flex resulting from your frame surgery.

Converting a mountain bike
Mountain bikes are legal in American 'cross, and this may be the best way to get
your feet muddy. Pull off your bottle cages, saddle bag and pump. Do the same
with the bar ends, which are illegal pretty much everywhere, no matter whose
racing license you carry. Swap the fat rubber for something a little skinnier
(26x1.5"-1.7"), which will lower your rolling resistance while increasing your
tire clearance.

DQ SIDENOTE: Hutchinson tires makes a 26x1.3 tire called the Cross Comp. If
you’re using a mountain bike, in my opinion, there is NO BETTER TIRE for
cyclocross racing! Practically every shop can order this tire!

If you want more of the feel of 'cross, you can reverse your brakes, and trade
your straight bar for drops. But you're talking a new stem, bar, shifters and
brake levers — big bucks and a ton of work. And that's not why you're reading
this, is it?

Keep it simple. Save your energy for racing and your money for entry fees, the
car wash, and the coin laundry. Anything left over, you can stuff in a jar
labeled, "Cyclo-cross Frame 2000." See you in the slime.

_______________________________________________

HOW TO IMPROVE YOUR STARTS FOR CYCLOCROSS
by Adam Hodges Myerson

I have to tell you this up front: my associate coaches and some of my clients
are mad at me for this one. All week long, when the mention of this article
comes up, one my clients says over and over, "There goes my top 5 in every start
this season. You're going to give all the secrets away!" He's got a point--this
is the stuff he pays for. But lucky for you, Bike.com pays me, too.

Cyclo-cross is unique from all other disciplines in that the field sprint comes
at the start of the race, rather than at the finish; you get your desert before
dinner, as it were. Your position on the start line, the speed at which you get
into the pedals, the gear you choose, and in what spot you make it to the first
hurdle or difficult corner can impact your entire race. You may find yourself in
the lead group with no extra effort, or you may spend the day stuck behind
traffic or crashes, battling to get up to the group you in which you belong. A
good start might even back fire and put you with riders you're not strong enough
to stay with, causing you to blow and go back even further than you would have
been had you been more conservative.

With all this to consider, one can see that starts are everything in 'cross. At
the same time, it's an aspect that riders rarely focus on or incorporate into
their training, even though it's easy to do so. There are two parts to consider:
training and technique. I'll outline how to improve both.

When you think about the effort you make for a start, you can boil the crucial
part down to the amount of time it takes you to go from a complete standstill
with one foot on the ground, up to your top speed. Essentially, a 15-second
sprint. There's obviously a lot more that goes on; you could almost view the
entire first lap of a race as part of the start. What we want to focus on here
is what you're doing initially to get yourself into position for that first lap.
That effort translates essentially to a sprint.

I've written before here about how to structure a sprint workout on the road,
and how to incorporate running workouts into your sprint training. In order to
work on your 'cross start, you can take the basic road-style sprint workout one
step further by trying to reproduce the start of a race. On your 'cross bike,
come to a complete stop with one foot on the ground, then practice doing your
15-second sprints from that position. When you sprint, shift down through all
the gears as you accelerate to simulate the start, until you reach your top
speed.

Here is where you can really work on all those little details that make the
difference between being in the lead group or not on the first lap. Start with
your strong side foot up every time (the foot you'd kick a soccer ball with),
and at the 2 o'clock position. Make sure your other pedal is turned to a
position that's parallel to the crank, so that when you put your foot on it
you'll clip right in. Sit on your saddle, with one foot on the ground, on your
tiptoes, right next to the pedal and ready to step in quickly. You can start on
the hoods or the drops; whichever allows you to shift most quickly. With
integrated shift/brake levers that might be the hoods, with bar-ends it's
normally the drops. You should have the starting gear already chosen. If you use
2 chainrings, the big ring and one down from the easiest gear in back is good,
perhaps a 46 x 23. With a single ring, I'm usually 3 gears down, which for me is
a 42 x 21. Training is the time to experiment with all these
variables so that you know what will work best for you in the race.

In a racing situation, there's even more you can do to ensure you get a good
start. One is to be sure to win "the first race of the day," which is the one to
the start line. If you're not being called to the line in any order and it's
first come, first serve, be aggressive. Get there early, and always watch the
crowd lining up to make sure you don't get taken advantage of. If you don't
protect your starting spot now, there's no point in fighting for it later. Just
as importantly, know who the official starter is, and watch that person like a
hawk as it gets close to time to go. If there's a countdown, anticipate the
start. Once it's in the final 5 seconds, someone's going to jump the gun. Be
prepared to go early, and don't be shy about it. If it's an unannounced start as
is popular in New England and at the SuperCups, never take your eyes off the
official. You have to see them getting ready to blow the whistle before they
blow it, and be in motion when it finally goes. If they walk
behind the field, concentrate! Listen hard for the sound, and again, be ready
to go with any early starters.

Again, it's these little details that add up to make all the difference in the
world. Even a notoriously bad starter can find themselves with the leaders after
the first turn or hurdle if they add these techniques to their regular routine.
The problem is, now that we all know, who's got the advantage?



_______________________________________________





RUNNING ECONOMY
By Joe Friel

Introduction
Practically all cyclocross riders come from a cycling background. Most do not
have much experience running, and they don't know how to train for running.
Worse still, they cling to the bike in races, attempting to ride every tricky
section even when running might be faster.


So, bikies, here's a tip: Train for the run. A lot. And don't just flail your
way through it, either. Just as you strive to be efficient on the bike, also
strive to be efficient in the run. The article below, from Joe Friel's E-Tips
column, describes how to become a more efficient runner. --Dave Carr

Running Economy
by Joe Friel

In the Triathlete's Training Bible I describe the "Pose" technique for running
and propose that it might improve your running economy. An economical runner is
one who runs with little wasted energy. Economy is at least as important as
having a great aerobic capacity (VO2max) and a high lactate threshold. Yet very
few triathletes ever work on their running form, but they'll do drills every
time they're in the pool to boost it for swimming.


The slower you are the greater the likelihood that working on economy will
increase your speed. Just the math alone supports this notion. For a 40-minute,
10k runner, a three-percent improvement in running economy means getting to the
finish line 72 seconds faster. But a three-percent shift for a 50-minute runner
means a saving of 90 seconds in a 10k. Going beyond just the math issue, we can
say with some assurance that slow runners are probably less economical than the
quickest. In fact, slower runners can make great increases in performance by
simply focusing one weekly running session on economy enhancement.



What should you do in these sessions? See my book for all of the details, but
here are a few form DO's and DON'T's from Dr. Nicholas Romanov, the developer of
the Pose technique, as adapted from his web site
(http://www.romanovacademy.com/).

DO raise your ankle straight up under the hip.
DON'T try to reach or push-off forcefully.
DO let your legs land themselves without any muscle activity.
DON'T point your toes; don't land on the toes.
DO make your ground-support time short.
DON'T move your weight to the toes-get off your feet as quickly as you can.
DO retain your support easily and effortlessly.
DON'T move your ankle back and forth, keep it always fixed at the same angle.
DO have your support on the balls of the feet.
DON'T touch the ground with your heels-keep them a bit above the ground.
DO keep your feet behind the vertical line going through the knees.
DON'T exaggerate your stride length or range of motion-keep your strides short.
DO raise your ankle vertically toward your butt.
DON'T try to lift your knees or move the knees and thighs far apart.
DO keep your knees and thighs down and relaxed.
DON'T try to increase the angle between your thighs.
DO keep the knee bent at all times.
DON'T straighten your knee even when the foot is on the ground.
DO keep your shoulders, hips, and ankles along one vertical line.
DON'T reach with the feet to try to cover more ground.
DO let the arms relax to balance leg movement.
DON'T force arm action to increase stride length.

The following are workouts I have runners do throughout the year. One of these
is done weekly, sometimes as a part of the warm-up. During a portion of each of
these they focus their attention only on one or two aspects of running
biomechanics as described above.


Downhill strides. After a warm-up run down a very slight grade for 20 seconds at
about the pace you would run a 400-meter race. In other words, the pace is well
short of a sprint but is fairly quick. Run 6 to 8 of these strides relaxing
during each. Walk back after each stride taking about 90 seconds to do so.
Walking is important for the success of this workout-don't run the recoveries.
Do this barefoot on grass to increase "feel." Check the area first to make sure
it is free of glass, thorns, or anything else that may cut. Don't run barefoot
if there are breaks in the skin.


Count strides. These are done the same as downhill strides except instead of
running for 20 seconds, count 30 right-foot strikes striving for a time of 19-20
seconds without attempting to run with a faster velocity to achieve it-use a
quicker leg turnover instead.


Uphill strides. On a 4% to 6% grade run 6 to 8 strides as before. Walk down the
hill after each. Short, powerful hill running has been shown to dramatically
improve economy.


Plyometrics. In a weekly session spend 10 to 20 minutes working on power with
plyometric exercises. Just as with uphill running, this has been shown to
improve economy in runners. This form of training is best done during the base
training period. Be careful with plyometrics-the risk of injury with certain
types of exercises is great. In a future article I will explain this form of
training.


With economy training it's best to do short workouts frequent rather than long
ones infrequently. Once the nervous system begins to fatigue or you experience
difficulty maintaining focus on technique, no further improvements will take
place. For the same reason, these workouts are best early in a session. Don't do
them when fatigued.

_______________________________________________



DQ’s CYCLOCROSS DRILLS
by DQ


When training for cyclocross I push my athletes to work on everything from
handling, running, transitions, etc. But with the addition of these three
workouts into your current training plan you’ll improve your cross prowess
tenfold. I would recommend that you do these workouts sparingly and always know
your limits. The first sign of fatigue will mean that you can’t perform the
drill with efficiency and you will have to choose wisely if you should continue.


Drill #1: On-Offs
Since a huge portion of your fluidity on the barrier transition is in how you
dismount and remount the bike I like to have my athletes perform just that.
Rolling your bike down a “smooth” dirt path dismount your bike as if you were
approaching a barrier. Take only one step with the right, one step with the left
and remount the bike.

Start this drill VERY SLOWLY and work up to speed. When remounting the bike
focus on getting your right foot from the ground, over the rear wheel on onto
the pedal as smoothly and quickly as possible. Remember that primary goal in
mounting the bike is to continue forward momentum as soon as possible.


Drill #2: Standing Starts
As Adam Hodges Myerson addressed in an earlier article the start of the race can
determine the outcome. So be sure that your start is as smooth as they come!

On an open road or clearing, come to a complete stop. Get your gearing set-up to
sprint from a standing start. This can vary depending on your strength, the
terrain, or if it is an uphill or downhill start so try different gearing
combinations to find what works best for you. With one foot clipped in (usually
your weaker leg) and your hands in the drops, lift your butt onto the saddle and
balance on the tip-toe of your unclipped foot. (If you can keep your balance
well, try placing the heel of your unclipped foot on the pedal. This will help
you find the pedal once the sprint starts).


From this position imagine the official firing the starting gun and sprint all
out for 20 seconds. Remember that the first sprint will really influence where
you sit in the pack for the remainder of the race! After this sprint recover for
2-3 minutes and do the effort again. Try this workout for about 30 minutes, once
a week for the first couple of weeks. After that try upping the effort to 40-45
minutes.


Drill #3: No-Bike Barrier Running
I see it all the time! Once you put a bike on someone’s shoulders or in their
hands their smooth-as-ever-running-form turns into a drunken-bunny-bounce over
the barriers. Before any of your barrier workouts take 8-10 short sprints
through the barrier sections WITHOUT your bike. Focus on how smooth you can run
through the barriers and not “hop” over each obstacle.


Do this with every intention on repeating it once you have your bike in tow.
Then try 5-6 runs through the barriers WITH your bike. Don’t worry about
dis/remounting, just run through the barriers. Trust me, this little effort will
help out big time!


DQ



---------------------------------
Click here to donate to the Hurricane Katrina relief effort.

[Non-text portions of this message have been removed]