Guys, I'm struggling respoking a rear wheel on a 1975 WR460. I ask a question some months ago and managed to get an article on the repoking plan. Problem I ...
... I got a 72 250WR i'm getting ready to part out. I think I even got an exrta set of wheels. I'll go check it out this weekend and see what I got....
I had a disc with some pics, cannot find it now. I will take some new and get them out to you. --- "Roger Allen Homes" <ernz@...> wrote: From: "Roger Allen...
... From: "Steve Clark" <steven_d_clark@...> I wish the paint was good enough for scanning, but this bike has been doing hare and hounds in the Mojave...
... I'm just wonderin', a lot of old 6 volt automotive-type coils probably won't spark much above 6000 rpm, will they? Harley had a 6-v system too but they...
Hi, Have added a photo to the spoking instructions (Spoking.zip) in the files section. The photo shows better just how the spokes must be laced to miss the...
Thanks for your help Colin _____ From: HuskyOwners@yahoogroups.com [mailto:HuskyOwners@yahoogroups.com] On Behalf Of Peter Worrall Sent: 02 March 2006 10:57 ...
-I bought a set of used ones from John LeFevre. I haven't been able to find any NOS or repros yet, but if I do, I'll post the name of the supplier. Brian- In...
Hi gang, Took the CR400 out for a ride and it won't shift up very well at all. I get a lot of false neutrals and jump back out of gears. Once you get into...
Hi, A couple of ideas; It could be a problem with one (or both) of the small spring loaded plungers (called 'ratchet sleeves' in the parts listing). One holds...
Hi Peter, I checked the shift shaft end play, like you said, and is has a little play. I can feel the spring pressure too and it pops back out again. I checked...
Hi, If the step feeder is incorrectly engaged with the shift drum (one tooth or so out) the bike will go into top gear and not come out again (or first,...
Yes, you can run excel rims on just about any bike, especially in Sportsman. And most everybody does. Craig AHRMA #474 w/stock, cracked, wobbly Akronts on the...
can a 1981 250 engine fit a 1973 frame Craig Parkinson <bf138@...> wrote: Yes, you can run excel rims on just about any bike, especially in Sportsman....
Hi Gang, Here's an instance where the power of a VMX group can help an honest guy out(see below). Here is a compressed link to a MapQuest map that shows where...
Dang Dr. McCook - you are fast! if anyone is in or has contacts in Michigan, lets help this vmx brother retreive his motor and get it to his rightgul owner We...
I will be replacing the fork seals on my 1985 WR 400 in the next couple of weeks and wanted to know how many cc's of fork oil are required? I'd also like to...
Hey Craig, you old wobbler, Wondering how you're doing on that AJS. Can't wait to see pictures. Robert ... __________________________________________________...
I'm working on a friends bike and I have run into what looks like an electric power valve that is unhooked. I do not know how it is powered, can any of you...
Hey fellow husky owners,is there anybody out there that has a smaller starter dirt bike that they would like to donate? I'm trying to get my 11 yr old out and...
