Doug, It has probably rounded off the drive dogs on the end of the main gearbox shaft where the engaging gear is. You may have to weld up the dogs and dress...
Kerry, i think they use a cr 390 gearbox and cut the centre out of the 400 clutch basket, so that all you have is the outer gear ring left and weld the 390...
I think I'm understanding that you attatch the newer & smaller clutch basket to the existing 400 basket by rivets ( I guess the excess 400 basket could be...
this thing must have sat for a few years and I would guess close to a year outside........took it for a ride today, it was unbeleivable when the power band...
Dave, I couldn't agree more, this Husky owner group is without a doubt the best. There's more info here & you get no quicker answer than anywhere on the net. ...
A person has to make the newer smaller clutch fit inside the 400 clutch basket and then secure it. Rivets can do this. One key is to mount it exactly so the...
I assume that the Black twin rib forks are AHRMA legal as long as they fit the 7" rule? DAve ... From: Roger Allen Homes Inc. <rogerallenhomes@...> ...
Kerry is right on the money! Suspension is really where it's at!! I ran '75 forks and Ohlin shocks, swing arm and a better set of clamps... minus the shock...
Thanks Doug! Now that I have found my camera after the move, I will go take some before pictures and document the rebuild. I did not do that with my 80 CR250...
DAve, I'm with you! This forum is great! Last year I redid a 250WR and am currently working on a 360. Without the knowledge and information provided by guys...
very much agreed !!!!! I really dont know what Id be doing without the info I have learned here ... From: DAve <jagrdog68@...> Subject: [HuskyOwners]...
Just a note of thanks to all who truly contribute here. I am learning scads (scientific term) with what you are contributing and the Husky Newsletters. Thanks...
Hey Rich,  How you doing.  Got good tooles made, in trade for servicing a machinist/ OSSA buddy's Konis.  Love the spring calculator. Don't understand...
Forgive the previous msg, that's what it looks like when I reply from my Sprint cell phone. It was supposed to say "What's involved?" ... From: jsh56@......
The frame mods really make the bike turn well. An engine modification that makes the 400 rev like crazy and wake it up is to dump the stock clutch and put in...
Sounds like you're ready for the 400 !!...it's a torque monster ,...box stock the motor is better than many motors in it's class that have been modyfied...km...
Thanks Kerry, all good advice here. I think I have been told this before, maybe I should start listening.I planned on getting Gold Valve emulators and...
No, I will take a look. Good advice thanks. DAve ... From: Mike Fitzgerald <camikegolf@...> Subject: Re: [HuskyOwners] Re: 1974 CR frames and swingarms ...
I would go with the Vin.Hus. clamp because of the tapered bearing set up.. the longer swing arm for sure ( it slows things down and gives you time to react)...
Have you looked at the pics of KM's 400? Lots of mods, from what I gather it works well. ... From: Dave Kramer <jagrdog68@...> Subject: Re: [HuskyOwners]...
Yes! DAve ... From: Mike Fitzgerald <camikegolf@...> Subject: Re: [HuskyOwners] Re: 1974 CR frames and swingarms To: HuskyOwners@yahoogroups.com Date:...
Are you planning on making it into a full blown racer? ... From: Dave Kramer <jagrdog68@...> Subject: Re: [HuskyOwners] Re: 1974 CR frames and swingarms ...
Kerry, Being that I am in the midst of rebuilding a 72, CR4700 MJ, I got excited when I saw this post. I must say that I perused the Husky newsletters twice,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
