Doug, I just sent an email off to see if they are in business and it hasn't bounced back! I used the following email address: vintage_performance@......
Jay, My favorite gearbox for here in the west is the OR or XC gearbox. I have rode enduro's with the cr and while it can be done it isn't as nice for me as...
My SEM is weak,tired of playing games with my ignition system. I'm about to pull the trigger on an MZ-B ignition system for my 83 WR 250. Anybody out there...
James..Any modern day Ign. will out perform an "old school" ign. even if it's in good condition. I have a PVL on my CR-400..I'm sure the MZ-B is evry bit as...
Chris want to hit the sand box on the 12th. Please e-mail me @ wcmsports@.... Becuase I no longer own and dont have any plans to buy another Maico I...
i put a mzb in my 82 250cr i use it for c.c. and it worked very well,with the fly wheel lighter than a w.r. more than the c.r.and worked well in the few mx...
Pulled the clutch apart today(instead of watching the Super Bowl, of which I have zero interest). Cannot remove every other spring--'79 390 only has 5 of...
I don't recommend running your plates metal to metal, be it disc to disc or disc to pr.plate or drum...km--- In ... orig. ... but ... do with ... impossible to...
Why? There is no movement between the non-friction driven disks. The first disk that goes into the clutch assembly is usually a friction drive disk, up...
The steel disc probley won't hurt the alum. , it just leaves no choice but to run the 2 fiber plates back to back and that won't last long and either will the...
Yes, we'll soon see how it works. The innermost alum. plate didn't appear to have much wear, just as the front cover didn't either. Apparently no clutch abuse...
I have experience with two MZB ignitions on my KTM's and love them. I've not had any ignition problems and would recommend them highly. I get mine from Rico...
Just looked up the clutch assembly for the Honda at Babbitts MC Parts, and their drawing doesn't show any separator springs. Then I looked up the clutch for a...
Yeah. MZB's rock! Easy to install, and work GREAT. Set the timing and line up the marks on the stator plate and flywheel. Straight forward stuff. I likey. ...
I've never worked on a clutch that had metal to metal...I would be suprised if there was one , but I learn something new everyday...the Honda is easy to find...
Er, yes, I think. Given the weight of an XR650L it could have a TH400 trans in there. Think I'll go out to the workshop and rub some ATF-soaked clutch plates...
Anybody interested in this bike? Here's a list of what's been done to it: 1974 Husky Mag 250 Frame (Cryo treated for increased durability) Modified by Vintage...
have found that you can tap the original hole to a standard size of 14 MM X 1.25. The new drain plugs are readily available from the auto parts store. ...
 Hi, thanks for letting me join your group!  Does anyone know what the clutch and trany gears look like on a 1980 OR 250  compared to a WR 250? The seller...
Craig called me today and apologized for the delay. We talked about Huskys for about 30 minutes. He gave me a couple of very good tips on the 8-speed tear...
Everything he has can be gotten elsewhere with more reliable service and sending a check for parts sucks...this is 2009 , I won't deal with a part-timer who...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
