I don't have either but I made this program based on some dyno runs I did so I know exactly what jet to use everytime. I'm not sure if it will translate...
Basically, the a different way of looking at the same thing. The one I use actually gives me the jet number so I don't have to have a chart. I change a lot of...
It is a must for me and road racing. Once you establish a baseline for your set-up, you will be spot on with jet sizes in any condition. I have a Computech...
looks like we don't need a $100 air density gauge, but rather a $275 density altitude gauge to really make it worthwhile. Thanks for the input! Will see what...
Wow that is impressive. Mark _____ From: F125@yahoogroups.com [mailto:F125@yahoogroups.com] On Behalf Of huronmountain Sent: Friday, March 10, 2006 1:33 PM To:...
but how much lead do you have to bolt on to make minimum weight? huronmountain <huronmountain@...> wrote: Check this out... http://216.92.70.185/sm/kart/...
It would sure as hell be a lot more than the 85lbs each I had to add to both Lisa's AND Julian's. Quite frankly, I wish they made the chassis' 25lbs heavier......
... I don't really have any other information, I had seen the link on another site and thought that others on this list would get a kick out of it. Bob Monday...
I'm gonna go out on a limb and guess that the total package weighs 70lbs (40lbs of motor). Brian ... From: F125@yahoogroups.com [mailto:F125@yahoogroups.com]On...
Heavier than that. I'd think. Consider the weight of steel components like the brake discs (4 of those), plus rear axle, spindles, bearings, steering column...
... Look at <http://216.92.70.185/sm/kart/pages/002_jpg.htm> it appears to be under the front of the seat, also made of carbon fiber. According to the other...
Hey Guys, My brother in-law/chief mechanic/motor genius/co-driver/etc. noticed that there is a shock on the back of that thing too, off of the rear axle. Hmm,...
... I saw that too, it looks like it is for the diffuser. I have a hard time picturing what it is doing though because there are seat struts mounted to the...
Or maybe it might not pass tech? ;-) And.... No front brakes! Yikes! _eBay Motors: Custom built 100 HP go kart (EXCELLENT CONDITION) (item 462141194_ ...
... Who needs front brakes when you have a roll cage (thank goodness he added that!)... Current top bid is by someone with the ebay login "auto_x_er". What ...
Anyone else who can make the Pro in Arkansas? How about you guys in Tennessee? C'mon, we have 12 now, how about making it 15? (This is going to be good...) ...
Anybody have a wiring schematic for a '93 CR125? Specifically the ignition circuit. My kart died in the rain at the Fontana Pro and it appears to be the...
Rick, I have a 92-93 CR125 shop manual. I'll bring it to the meeting tomorrow. Eric _____ From: F125@yahoogroups.com [mailto:F125@yahoogroups.com] On Behalf Of...
I thought I was getting a great deal on a spare set of wheels, until they arrived. It turns out that OEM Tony Kart wheels are 120mm for the fronts, and 212mm...
Less than 6 months ago I completely rebuilt the brake system on my birel. Last weekend I bled the brakes for this weekends event. all looked good clean fluid...
I've had the same thing happen on my Birel 32. It turned out that the piston inside teh cylinder either swelled up or was machined incorrectly and would jamb...
How much F125 participation is there in the SanFran area? Particularly close to Walnut Creek? Where are the Solo events held? A year ago I thought anything...
Hi Vic, San Francisco Region has three chapters: SanFrancisco, Sacramento and Fresno. Vernon Head and I are the only consistant f125ers in the SanFran chapter...
got my cylinder back and am rebuilding the motor now. The studs were removed for the honing/plating. Do I use antiseize for the reinstall or just dry? What...
I'm not sure about anti-seize. But I would clean the entire cylinder really well, including the holes for the studs. Lots of people use soap and hot water on...
Like many I'm sure, I've thought about this as well, but I never even knew the contingency DIDN'T apply. I've had a great relationship with Jeff Speer in the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
