Hondas were pricy $85 for the set and the bottom ring is 3 rings now. Wouldn't you know it the bottom ring of the 3 bent on the one side as I was putting the...
I have listed a set of NOS Racing CB175 Valve Springs, self serving I know But someone out there may appreciate having them. Ebay #140202604174 Thanks guys...
Ben, what size do you need. I have quite a few NOS sets kicking around. I'd part with them for WAY less than $85/set. JohnnyB ... now. ... as I ... my ... I...
Standard size Johnny (no overbore). I actually found a set of flebay right after the post by searching the honda part number. Shipped at $22. Hopefully I...
Good deal. I think most of mine are overbore anyway...could have some standard rings and pistons...I need to inventory the stuff :) And that's cheaper than I...
I added 3 pictures of my "Looper' in th ethe photo section "Ernie's Looper" album. Unfortunately they're not in order, but it is the same bike in three...
Ernie, What seat/tail combination is that? Terry Sanderson ... From: Gene T To: CB175RaceTech@yahoogroups.com Sent: Thursday, February 07, 2008 10:29 PM ...
It's home-made Terry. I laid it up to a mold I made . The back half , near the taillight ,is from the back half of the original cb gas tank . From where the...
Thanks Gene. I'll have to go look and get back to you. I know they are oversized and I had to relocate the brake stay in the rear so they'd fit. E ... From:...
Gene the tires are: Cheng Shein CS-Hi Max. 100/90 front , 110/90 rear. I'd really like to put something sticky on it but have never found the time. Most of...
Ernie, I have worked with fiberglass some, but I would like to hear a little more about what you did. I'm always willing to learn more. BTW didn't you post...
I don't recall posting on the Loop list about the tail,Terry. Here's how I did it: First , I needed a mold so I covered the original gas tank with plastic wrap...
Just joined the group as I just picked up a 71 CB175 and starting the conversion to a racer. Looking for more info on race tires for the stock rims. I know...
Dunlop KR825 (front and rear) are my favorite. Very very good in the dry.... not so good in the wet. Avon makes the appropriate size too, better in the wet. ...
Thank you for the information. The listings have been changed and the one bidder notified of a bid retraction. ... From: "John Branson" <jbranson@...>...
I finally got my engine assembled this afternoon. Now its time for finding a chain. I needed a new front sprocket and couldn't find a 16t so went with a 14t....
I know I'm not ready for race rubber this year at the least esp. with my recent back issues so I need to order some new tires for my cb175. JC Whitney has some...
Hopefully someone will chime in with more useful information. I don't have much info in my notes about stock bikes. As for the tube....I always end up using...
Thanks. I don't care if I go with the stock sizing. Just want something that'll fit, be cheap enough for the pair to sort the bike and not be entirely...
Here's a link to a page that shows some inch metric tire size conversions. http://www.webbikeworld.com/Motorcycle-tires/tire-data.htm I had the same problem...
I use only Chin Shin tires from whitney on my street 160's, mostly because they are hard sizes to find..I just replaced a set a few weeks ago on my cl160 that...
Just FYI : I'm running Chin Shin 110/90 rears and 100/90 front , uni directional on my '72 cb175. If you use the 110 /90 rear you'll have to reloctate the...
Hey, any of you Honda 175 racers have a complete CB175 front wheel you can sell to Marcus Poison? He's building a 175 racers for someone and says the bike has...
