what are my options? stock replacements or the aftermarket ones I see on ebay are a bit more than I want to spend at this time. Anyone have a usable left side...
I have a '69 CL175, and the splines on the kick start shaft are worn out. I've found a kick start shaft from a CB160, and I'm wondering whether or not it will...
They're different. I've probably got one though. M Sent via BlackBerry from T-Mobile ... From: Martin Schricker <schrickm@...> Date: Wed, 1 Jul 2009...
Guys- I have a CL175K0 sloper rolling chassis in Tennessee if anyone wants to make me an offer (frame, swingarm, forks, triple trees and handlebar mount, no ...
Guys- I have a CL175 sloper rolling chassis in Tennessee if anyone wants to make me an offer. Rims are bent (left them on to roll the thing around). I also...
Would you be able to pick up in middle Tennessee?? I am not really interested if I have to ship these things...If so, I will think about a price and send...
I recently had my motor completely rebuilt, After assembling the bike I got it running near tip top, the only change from stock is filter pods and upping the...
... Well I have the head off now, the head looks great the honing marks are still on the cylinder walls. Pistons look great as well as the rings, So...
... I just pulled the entire head as a unit... Thanks I'll look into this, Frustrating as I just payed over a K to have the entire motor ran through....
Posted by: "silentcrabhands" vince@....... ... running near tip top, the only change from stock is filter pods and upping the main jet to 105. I was getting a...
Vince, Steve is pointing you in the right direction; we spoke on the phone two weeks back about the same exact problem with my rebuild -- you don't have any...
If someone can isolate causes of no oil getting to the left side valves/cam; I would surely like to know - since it seems to be a recurrent problem. My stock...
Huh. I've never had any issues at all getting oil to the top end on any of my racers, nor have I heard any of the other guys up here (around 20+ racers, some...
Can you post pictures of the oil filter cap and spring loaded joint in the oil filter access cover? Is this a 160 or 175, and how much oil was in the motor?...
No changes except for the Kibblwhite valves/retainers that you installed for me last year. Verified that oil pump is working and chugging out "volumes" of oil...
Could be a source I suppose. The oil is picked up by the pump, then pushed out the back to the engine case, up around the stud and through the right cover to...
What kind of motor is this? 160/s175/v175? The oil gallery that feeds the rear studs is sealed by sidecovers and sidecover gaskets on both sides. Take a...
Unfortunately I cannot, the motor is already at my mechanics being ran through. It is a 1970 vertical 175. I am unsure about the gasket sealer used. Sorry I...
CL175 Vertical Upon inspecting the oil pump and the pump check balls, I found the lower one was stuck and then verified that both were operational before ...
Vince, Sorry for hijacking your original thread, but since we were all in the same boat so to speak, I thought the more ppl we could get talking about this,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
