I've got a BikeE AT and I want to purchase a hitch mount rack to transport it on my GMC Envoy that has a 2" receiver. Given the weight of the BikeE and its...
... 1UpUSA has a superb (but expensive) rack. When you order it, tell them the 'wheelbase' length of your bike and it will arrive with the proper 'arm length'...
Thank you for the suggestion. I will check with them next week. ... From: Downey <alckytxn@...> To: BikeE@yahoogroups.com Sent: Friday, March 3, 2006...
Last summer I went to a GI Joes and found a hitch mounted cargo carrier which is about a 2'x4' platform made out of a steel mesh with tie down holes on the...
Howdy Bike E types - Just got a Bike E CT that was barely used - completely stock, no upgrades. It was sitting in a garage for about 2 years after the owner ...
Hi Denny, I hope you enjoy your CT as much as I have loved my Bike E AT over the past nine years. While we all know it's a great commuting bike, I have used...
I wouldn't be using side panniers mounted to the seat, but rather low and below the seat with the weight held by the frame and no seat structures. Unless you...
I live in the south suburbs of Chicago and I'm selling a Bike E CT for a friend. My friend's son bought it for him for exercise but he never had the time to...
Hello, I have the following for sale: Alesa 305 36-hole, single wall rim. Needs new rim tape and tube. Radial laced to Ultegra hub (with skewer) with Maxxis...
bought a bike e at a yard sale for $25.00 and rode it home. is there a way to hook a kid trailer to this kind of bike. WOW FUN TO RIDE !!!! Felt like I needed...
I have hooked a kids bike trailer to mine. I have a trailer I bought from WalMart for $89 (hauls by 2 yr old) It has a coupler that attaches to the back axle...
Got a standard rear rack that I want to adapt to mount on my CT. My CT has two threaded mounting holes near the rear wheel hub. The lower ones are being used...
Couldn't find anything on this in the archives. I am having lots of trouble getting the right side pedal off of my BikeE XT pruchased used. Is it possible that...
... I've got the funky one here: <http://www.geocities.com/dolo724/bike-e-bracket.html> -- "Preventive war was an invention of Hitler. Frankly, I would not...
WD40 is not a lubricant or penetrating oil. It is a water dispersant made for the USAF back in the 50's or 60's. Make sure you are turning it to the right to...
Dave Your right hand peddle ( crank side ) unscrews counter clockwise. You may need to place the crank arm in the freezer until it is completely frozen then...
Oops. You are wanting to get the right side off. Turn the right side to the left to get it off. Turn both to the front to get them on. Turn both to the rear to...
I've had a number of pedals on kid's bikes that were less than cooperative coming off. This procedure worked for me every time. Put the correct sized open end...
SkyPrince@...
Mar 28, 2006 11:39 pm
943
Once I bolted on to the drop-outs it was obvious that the mounts sold by easystreet are the way to go. The front mounting holes on the rack will line up...
I had to use most of the advice then still considered giving up. The 2X4 didn't allow me to get enough pressure by myself. If I could have had someone sit on...
Re: Dave: Do what I do regarding clipless pedals - clip in with you and the bike leaning against a tree and clip in and then clip out and then clip in and clip...
... Also, when you clip the first foot in and takeoff, you can 'backpedal' quite well now. learn to power with one foot a little and you can get some speed up...
... Expensive, but extremely high quality. Tell them your wheel base and it arrives with the correct length arms. I love mine. http://www.1upusa.com/ Carl 1...
Kludgy way to do it, but I bought one of those rolling tool stands for $33 from walmart. Has four wheels on the bottom and a shaft that comes up that is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
