I have a CT and never had the Pannier Racks. I used to use a back pack on the back of my seat but the back part of the seat fame broke and (very fortunately) I...
The seats don't break because of a pack but because they were designed wrong. If the replacement seat is the better design then you will have no trouble....
When my seat broke, I took it to a welder who fixed it for $15. Racks come up on eBay from time to time. That's where I found mine. ... From: Michael Ross...
On Jun 12, 2009, at 7:40 AM, Aaron Jamieson wrote: When my seat broke, I took it to a welder who fixed it for $15. Racks come up on eBay from time to time....
The 11th Annual Recumbent Retreat at Fort Stevens State Park in Warrenton, Oregon is scheduled for August 14, 15 & 16, 2009. Visit www.recumbentretreat.org for...
I do not want the entire group seeing these photos.Because some may recognize me. Here's the link: http://chopsocky.zoomshare.com/files/photos.htm Enjoy babe...
My shock absorber has gotten so it will not hold pressure, so I ordered a gasket set from Cane Creek. It looked simple enough, but I was unable to unscrew the...
... Replacing those gaskets is not trivial work, IMO. One is likely wasting time and risking damage to the seals be doing the work oneself. I'm sure we'll...
Easy Street
service@...
Jul 11, 2009 1:41 pm
1566
I just bought a kit for my shock and replaced it with no problems. I have been taking my shock off every now and then to lube and clean it. So when the kit...
I had the same problem, got the replacement kit but chickened out and sent the AD5 to Cane Creek for overhaul. Very glad I did - rapid turnaround and works...
The fix is very simple and anyone can do it with a little bit of time and patience. It took me about half an hour to do. The time consumption is making sure...
I have a BikeE with the Hayes brakes. Nobody told me when I bought this that I would need to bleed the brakes every year. Â Anybody else having the same...
I have a BikeE Tandem Recumbent and ceiling pulley system for storage from the ceiling in a garage. I bought it in 2000 and it may have 500 miles on it. BikeE...
Tom, Thanks for the suggestion. I am located in The Villages, FL which is near the Florida turnpike and I75 interchange at Wildwood, FL John Fleming ...
Does anybody out there know if there is somebody (Bike Shop) in the Los Angeles, Ca. area that works on Bike-e?, I need to replace the plastic tube that runs...
Many people do not use the tube. I have not for 10,000 + miles. I do have chain ring guards which helps keep the chain from jumping on jarring bumps. ... -- ...
I've been trying to recover my seat, stretching new fabric around top and sides, and attempting to staple the new cover to the bottom, but my attempts are in...
Maybe heating the plastic with a hair dryer or heat gun would soften it enough for the staples to go in. I'll be doing this over the winter, so I'd like to...
I just pull a piece of fabric down over the old cover and tie it off with cord. I suppose it looks a little tacky if you crawl under to look at it, but it...
Any bike shop should be able to work on a BikeE. Major components are similar to any other bike. The chain tube on the side of your BikeE was either...
I use Richard's Bicycles, 11943 Valley View St., Garden Grove, 92845, 714-379-2717. They do quite a bit of business in recumbents and understand our needs. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
