An old friend recently gave me a BikeE that had been sitting in storage for the last 8 or so years. I'm interested in knowing what model it is. It is blue, has...
My guess would be that it's a "CT". ISO tire sizes (diameter) should be 305 and 406. It probably says on the sidewalls (i.e. 40-305). The other tire sizes...
Getting ready to electrify with mid-drive motor my RX commuter with trailer....I have reviewed BIONX, crystalite, etc. for awhile now and see that the Ecospeed...
-Hi I have had an ecospeed motor on my bike for about 4 years. It's great. Right now I have some trouble with the switch - doesn't want to come on or off...
Someone must have found a better way to inflate that rear suspension than using the little pump which was included with a new Bike E. I found an electrical...
I bought an original Bike E cyclometer a few years ago but never installed it on my Bike E. I tried to install it tonight and the wire was too short....
Sue, I own a Bike E also and recently bought a new cycle computer with too short of wires same as you, i found a computer/light mount at Rasmussen Bike...
I bought a used BikeE last year and I had the local bike shop install a cycle computer. But they installed it way too low on the handlebar since that was as...
Just splice in some wire. If you can solder that will make the most dependable connections. I almost always splice in a splice of heavier wire when I get a...
The wire is coaxial (small wire inside a conductive outer shield) and is so fine that I found it impossible to work with. I can solder, and have built numerous...
There is no commonality between cabling for these things. What you see on one computer will not be seen on another. After splicing at least 8 different...
Interesting. As I recall, the computer with the coax cable was the Performance Axiom (3C?) - anyway, they have changed models twice since then before changing...
Who knows what else they did then. You could use a pickup made from a two wire hall effect sensor and maybe that requires shielding? Doesn't make sense to me...
I have had to splice wires in the past. I find that the wire from an old cell phone charger works just fine. I use shrink tubing to cover the splices....
Does anyone have a BikeE chain guard they would be willing to part with, or perhaps know of a source for these chain guards? (It's just a black tube, but I...
I replaced one with some Teflon tubing from Home Depot. The only trick was anchoring the tubing - Teflon is slippery! This was a few years ago, so the exact...
http://www.hostelshoppe.com/cgi-bin/search.pl?category=202700 Buy A Gallon Of Gas...ARM A TERRORIST Walk, Pedal or drive a Electric Vehicle Whenever,...
Can you post a picture? Thanks Ernie Patterson From: BikeE@yahoogroups.com [mailto:BikeE@yahoogroups.com] On Behalf Of Douglas Holstein Sent: Tuesday, July...
Just purchased a loaded RX, sitting in someones garage for 6 years, and was wondering about the versatility of the BikeE Air Shock Pump. Obviously you can use...
Just purchased a loaded RX, sitting in someones garage for 6 years, and was wondering about the versatility of the BikeE Air Shock Pump. Obviously you can use...
Wish I could find another BikeE. My daughter who lives in Fl.is riding mine. The suspension pump was never designed to pump up tires. Buy a floor pump with a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
