Zach; Thanks for the information and the tip on the tap.
----- Original Message -----
From: "Zach Kaplan" <zakaplan@...>
To: <Bacchetta_Bikes@yahoogroups.com>
Sent: Sunday, February 16, 2003 10:59 AM
Subject: Re: [Bacchetta_Bikes] Rack mount hardware


> on 2003/2/16 7:54, Denny Voorhees at dvoorhees@... wrote:
>
> > Anyone know what size the mounting bolts are for the rear dropouts? Will
the
> > water bottle bolts be the same size?
> > I tried a couple sizes I had around, but they seemed to turn in quite
hard so
> > I stopped. Its probably the paint in the holes, but I don't want to
force it
> > Denny
>
> Same size as bottle cage bolts, M5 x .8. If the screw won't turn easily
due
> to paint on the threads a M5 x .8 tap should be run through the threads.
>
> --------------------------------------------
> Zach Kaplan Cycles
> Alameda, Northern California, North America
> 510-522-BENT (2368)
> zakaplan@...
>
>
>
> To unsubscribe from this group, send an email to:
> Bacchetta_Bikes-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>