Richard Crawford's bullseye match is on in Blountstown Florida this Sunday, Dec. 8th. Directions: Exit 142 from I-10 onto 71 South. Left onto highway 20 in...
Sorry for my first post, but the Blountstown, Florida match is Sunday, December 9th. Directions: Exit 142 from I-10 onto 71 South. Left onto highway 20 in...
Many, many moons have passed since I shot in competition while in the Marine Corps. I want to start again but funding for that one handgun is a handicap. I...
Dear All, Hi. I'm a newbie with a Problem with my 30mm MatchDot UltraDot sight. It's mounted on a Rock River .45 with the Ultradot factory rings. I'm using a...
Larry's Guns is a factory authorized service center and may have the answer to you question. http://www.larrysguns.com/default.aspx One can only imagine that...
There is an order to the tightening. First tighten the screw between the base and the scope. Second, the top screw. Or ditch the goofy ultradot rings and get...
Two things to try; First loosen the top screws and while the top screws are loose, tighten the bottom screws. Then tighten the top screws. There should be some...
I have found the UltraDot rings to be a bit--shall we say--flimsy. If you are having problems with ring-to-scope contact, I highly recommend Burris Zee rings,...
Bill gives some good advice. If you have a 1911 the Marvel 22 Conversion Unit 1 is an outstanding target pistol. I had mag problems also - the "Colt" marked...
The Ruger Government Competition is a fine shooter and very accurate and the best value in your price range. The trigger can be tweaked reasonable easy to...
Rugers are not bad until you have to disassemble and clean it. They are not easy to reassamble. I had one for a short period. ( not for me ) SW 41 ( older...
The Ruger is not all that bad once you get some practice putting it back together. I do not own one but I have put several back together for other shooters at...
The Rugers are not that bad to disassemble/reassemble once you get the hang of it. Just follow the instructions to the tee. I doubt that you will find a...
Rugers reassambly are no problem at all if you just learn what the hammer and strut are supposed to do and look inside to make it so. And they are accurate...
Due to my affinity for revolvers and somewhat limited budget I think I'd like to concentrate on the DR program. I do not currently have any Bullseye guns. Is...
The traditional advice is to start with a .22 because it's cheaper & has less recoil. If you're already familiar with recoil and do some reloading, the .38 is...
Richard Crawford's bullseye match is on in Blountstown Florida this Sunday, January 13 Directions: Exit 142 from I-10 onto 71 South. Left onto highway 20 in...
Am I correct that a 900 can be shot with any caliber gun? For example I have seen an announcement of a revolver competition that will include a 900 and also a...
Hi Ned, Yes, you can shoot a DR gun in a 900 if there aren't other restrictions mentioned in a specific program; i.e. some ranges only allow .22 rim fire to...
Depends on the match. It may be .22 only, like a sectional. Or it may be any CF or 45 only. We have an upcoming 900 match in NJ that's DR revolver only. ...
We have in stock Moon Unit indexers for Star reloading presses for immediate shipment. $175 + S&H Go to: http://www.bullybarrel.ray-vin.com/index.htm/ See it...
Norm: The match you mentioned may be the one I was referring to: is that the one scheduled for May 10? The bulletin I read indicated there would be an outdoor...
Same one, and yes the same gun can be used. BECAUSE ... the 900 is a NJ state DR championship match. I believe it may be the first one ever. Here's a link...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the BULLSEYESHOOTERS group. File : /List...
BULLSEYESHOOTERS@yaho...
Feb 3, 2008 5:26 am
2183
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the BULLSEYESHOOTERS group. File : /List...
BULLSEYESHOOTERS@yaho...
Feb 3, 2008 5:37 am
2184
I am putting the word out for Richard Crawford who is directing a bullseye match at Blountstown, FL on Sunday February 10th. First shot at 9:00AM central....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
