Hi from Australia, I would like to buy a Benelli mp90s pistol in .22 for ISSF shooting here, can anybody give me their experiences with this pistol ?...
A great pistol. You do not have to buy anything for it to compete. The grips are top of the line and they have about the best trigger going--better than my...
I am having ejection problems with my GT 45. It seems that the extractor is pulling the case out only half way. I load with 3.8gr of BE with a 185gr SWC. The...
I don't know what the weight of the recoil springs are that you are using, but my guess is that the loads are too soft for the recoil spring. Is your .45 set...
I will increase the load and also experiment with the other spring. I might call Larry's Guns and ask about the weight of each spring. Thanks for the reply....
... of ... that ... chamber ... "The recoil spring is the shorter of the two that was included with the gun" identifies half of the problem. If you want to...
Basically your loads are to light. On a technical note, the extractor does not pull the case out of the chamber. With no extractor in the pistol the gun...
I have used my GSP .32 for several matches and shot it well. My problem has been erratic grouping off sandbags - for some reason I cannot seem to predictably...
What's the distance you are shooting at? Also you might want to search the bullseye-l list there have benn numerous posts with regard to gsp 32 call accuracy....
I'm just getting into 45 bullseye competition. Would you recommend the Ultradot or their new Matchdot sight? As best I can tell, the Matchdot differs primarily...
Hello "walter3082000", Go to the BULLSEYESHOOTERS Site "SEARCH" box and type in "LOAD" ... "LOADS" ... or "LOADS 45"... Hit Search and get ready for a bunch of...
Hello "walter3082000", The ability to select various 'DOT' sizes may prove prove helpful to you if you plan on shooting indoors, 25 yard and 50 yard...
Best advise is to sign up for the Bullseye-L forum. http://www.lava.net/~perrone/bullseye/ Roddy -- "walter3082000" <walter3082000@...> wrote: Hi, I'm...
Last night I got some good groups. I used a rubber molded forend rest [Millett] and rested just the tip of the muzzle end bbl weight on it, let my strong hand...
In a message dated 8/16/2007 6:19:38 P.M. Pacific Daylight Time, walter3082000@... writes: Hi, I'm new to Bullseye shooting. I'd like to have some...
NDBBM4@...
Aug 17, 2007 2:17 pm
2039
... Hi, I am Jerry Vidal and have been shooting Bullseye for 4 years. I use aquila 22 40 gr standard velosity for my 22 and I load 4.0 grs of bullseye with a...
... Asking a question like this of target shooters is a little like asking someone their favorite church, car, or TV show. I assume you're referring to .45ACP...
I'm in the same position. Over the next few years I'll be doing informal shooting indoors at various distances from 25 to 50 feet and outdoors up to 25 yards...
I too am looking for dot sight recommendations. I think I do want multi dot size capability. I'll be shooting at 25 to 50 feet indoors and up to 25 yards...
The MatchDot is more suited for bullseye in the size of dots. However the 1" regular is more than perfect for bullseye. Especially so on 22s and short...
Hi, on the basis of advice here and from others, I went with the MatchDot, mostly so I could also shoot the indoor range with it. Just received it from larry's...
I'm in the same position. Over the next few years I'll be doing informal shooting indoors at various distances from 25 to 50 feet and outdoors up to 25 yards...
New to the group. My wife and I shoot in a Bullseye league. She shoots a High Standard 107 which dose not fit her small hand at all I let her shoot my Browning...
I would go with the Mark II Ruger. You can get the trigger worked on and it makes a good bullseye gun. They are not to expensive and are built like a tank. ...
If you can find one, buy a used MarkII MK-512. They are quickly disappearing as the MKIII's are piece of junk. I used to buy all I could from Gunbroker for...