I've got Kunhausen's book, but, as I recall, he used some sort of front sight stabilizing block that I can't find anywhere and his instructions on setting up ...
We are thinking of getting a Ransom Rest for our club. The problem seems to be a good solid mount that can be taken down when the Ransom Rest is not used. Has...
If I knew of a local gunsmith who could mill a front sight dovetail I might go that route, but I don't have the equipment and real gunsmiths are in short...
I changed from TiteGroup to Alliant American Select last year. (I like TiteGroup but had a little trouble with consistency - still use it for my IDPA revolver...
I load both 185 and 200 gr LSWC bullets over 3.5 - 3.7 gr of Bullseye. These are plenty good and accurate out to 25 yards, I would not use them on the 50 yard...
We modified a couple of the solid rifle benches at our club with holes to fit the rest's mount and use carriage bolts, nuts and washers to secure; remove when...
USMC's pistol team uses 4.3gr of WST behind a 200gr SWC as their practice load. I find it to be an outstanding load, very clean, consistant and accurate. Ten...
... Speaking from experience, I've shot off several staked front sights! Once during a night tactical class. That was very interesting. If you need to have a...
... We have ours bolted on a 1 1/2 inch laminated plywood. Then C clamps are used to mount it on a shooting stand/bench or something of that sort. The rest is...
Ours is kept bolted to a sturdy base then a lid with combination lock to hold it down and keep it dry. It looks like it might be some sort of ammo can mounted...
Thanks for the advice! I located and purchased a Ransom Rest, it is mounted on a small board. Will try the "C" clamp method. Problem is our clubs benches are...
Last queston, what pound recoil spring do you reccomend, Thanks, Jim ... _________________________________________________________________ Getting married?...
For 50 yard line loads I would try 4.0 - 4.3 gr Bullseye with a 185- 200 gr bullet. You need to get close to 800 fps in order to maintain bullet stability out...
1800 Match June 26, 2004 at Volunteer Rifle and Pistol Club. Details are below. Please contact me with any questions. Thanks for your time and attention. Jay...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the BULLSEYESHOOTERS group. File : / FOR...
BULLSEYESHOOTERS@yaho...
Jul 7, 2004 6:04 am
1044
For a newcomer to this sport is the new Ruger Mark III rimfire a decent choice? The list price ($382.00) seems reasonable and it appears a red dot scope can...
Probably too new to have a track record, but given the longevity of the Mark II there should be no reason why not? There are plenty of Mark IIs used and new...
There is nothing wrong with a MKII as a mater of fact a little trigger work or a MKII Accurizing Performance Kit from Volguartsen and It is a real good ...
"Shooting Sports USA" lists a few that may be of interest: New Castle, DE: August 7-8 (this might be a State Championship) Contact T.A. Perry: tap45357@......
Hello "tfurey7": Go to our 'Links' area and select... MATCH SCHEDULES. Also try going to 'Files' and select... Locate Shooting Ranges by State. Enter NJ and a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
