I exhausted all sources and ideas on this problem. Finally, at the suggestion of a Redding technician I blackened one case with magic marker and tried to...
Dies can change the shoulder angle through a partial collapse of the shoulder. They can also stretch the case, by pulling the expander ball back through an...
Yep. And I have remeasured it and they are a couple thou under spec. It's the same die I have used previously. That's why this is such a puzzlement. Frank Have...
I don't tip-toe around anybody. I watch these anti-gunners come at us full strength with full media backing. The anti-gunners don't care what words or deeds...
<<it appears the shoulder of the case is the problem -->> That is a logical area to suspect. Visual inspection with OK cases indicates there is no difference. ...
I blackened with magic marker, that his how I discovered the shoulder angle problem. The first time I sized I did use the expander button. Then again without....
I will be reposting this a couple more times between now and the match. I just want to keep those of you who are competing up to date on the match, and I want...
Don't worry -- Michael Moore assures us that Kerry won't take away our hunting guns (unless they're semi-autos, pumps, or shoot a cartridge that can penetrate...
If the sizing die is down too far it will shove the neck back enough to cause a problem, ran into this With the 7.62X25 my first try. Hank ... From: Vernon...
How can you put the sizing die too far down? My reloading manuals reccomdend the die come down to within a couple thou of the holder. The Sierria bulletsmith...
How can you put the sizing die too far down? My reloading manuals reccomdend the die come down to within a couple thou of the holder. The Sierria bulletsmith...
Most of my dies are RCBS and they say bring it down to touch and then go down another ½ turn. This other half a turn made my 7.62X25 shove the shoulder bach a...
Frank, That works great on straight cases but on a case with a sholder the shellholder thickness may vary enough to cause the sholder to be pushed back or...
To : Hank [mailto:Hank@...] Sent: Thursday, November 04, 2004 10:43 AM Most of my dies are RCBS and they say bring it down to touch and then go down...
I need a recipe for .303 Brit that uses 123gr bullets over IMR4895. The aim is to approximate the trajectory of His Majesty's ball load with reduced recoil. ...
To: montemanm1 [mailto:montemanm1@...] I need a recipe for .303 Brit that uses 123gr bullets over IMR4895. The aim is to approximate the trajectory of...
I do the same with the hornet for my Ruger #3 but my Win model 43 Seems to like more. The 7.62 I shoot is a CZ52 auto pistol and Geoff may have hit the Issue,...
No need to worry about THEM! His followers are all moving to Canada (even Jim Carey became a US citizen!) OR in therapy! BUT they are NOT going to go...
My first hornet was a Sedgley converted 1st gen Colt single action. One of the most beautiful pistols I've ever seen. Non fluted cylinder With a one piece...
I will be reposting this a couple more times between now and the match. I just want to keep those of you who are competing up to date on the match, and I want...
Of course, whatever works is correct. But I have resized other brass with these dies in the past and no problems. The dies were set to barely touch the holder....
To: Hank [mailto:Hank@...] My first hornet was a Sedgley converted 1st gen Colt single action. Stop -- you're making me jealous. :-) Never owned any...
Hi list, I just picked up a CZ-52 in excellent condition. Where can I purchase safe factory loaded ammo for it?? I have 1 box box of Sellier & Bellot...
For info, you can't beat Google: http://www.google.com/search?hl=en&q=cz52+pistol&btnG=Google+Search For ammo, it looks like S&B is your only option. Here is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
