Top 15 most expensive cars sold in 2007
http://ferrarifever.ning.com/profiles/blog/show?id=2005807%3ABlogPost%
3A544

--- In AntiqueTractorPulling@yahoogroups.com, "wd45man" <wd45man@...>
wrote:
>
>   We pull all over Northern Indiana, Just wondering if they pull
> deadweight any where else.
>
where do you pull deadwieght in n. indiana

WELL I AM HAPPY TO ANNOUNCE THAT I HAVE CONFIRMATION ON THE JUNE
  RACE.

  THE RACE IS GOING TO BE JUNE 2nd AND JUNE 3rd AT THE WILSON COUNTY
  FAIR GROUNDS 2331 Hwy 301 South Wilson Nc 27893-8556

  JUNE 2nd REG 12:00
  TECH 1:00
  Race 4:00

  JUNE 3rd REG 11:00
  TECH 12:00
  RACE 2:00

  CAMPING WILL BE ALLOWED ON SITE IF YOU DECIDE TO BRING AN RV THEY
  WILL HAVE WATER AND ELECTRICITY HOOK UPS BUT THERE WILL BE A CHARGE
  OF 20.00 A DAY. THERE IS ALSO HOTLES DOWN THE ROAD. DAVE ALLGOOD
  THE
  FAIR GROUND EVENTS DIRECTOR SAID THAT THE DELUXE INN AND THE
  MATTHEWS MOTEL ARE ALWAYS FILLED FIRST DURING OTHER EVENTS SO I
  WILL
  SEE WHAT I CAN DO FOR SOME RATES AT THOSE TWO AND MAYBE TAKE A RIDE
  AND SEE WHAT THEY ARE??? THERE ARE PLENTY OF RESTAURANTS REAL
  CLOSE.
  THE FACILITYS ARE AWSOME AND I MEAN AWSOME PLENTY OF ROOM TO RUN
  THE
  KIDS CAN RUN WIDE OPEN. THIS EVENT WILL BE RAN RAIN OR SHINE WITH
  IN
  RESON OF COURSE. IF AND WHEN WE PULL THIS OFF HE IS ALREADY TALKING
  SOMETHING IN SEPTEMBER JUST BEFORE THE FAIR..I COULD RUN ON FOREVER
  SO ANY QUESTIONS PLEASE GIVE ME OR AMY A CALL OUR NUMBERS ARE 919-
  702-0065 FOR ME AND FOR AMY 919-702-0131.

  Dave Lande
  PRESIDENT CLMRA
______________________________________________________________________
____________________
Could Everyone Respond to my email (Yardzilla82@...)that
is planning on attending this event and what class they will
be racing in or if they are just coming to watch.

Thank You

David Wright
______________________________________________________________________
____________________
Carolina Lawn Mower Racing Association and Contentnea VFD
Proudly present for the first time ever Lawn Mower Race at the Wilson
Co. Fairgrounds.
Two days of action packed racing.
Date: June 2ND @ 4 pm and June 3RD @ 2 pm
Come early and meet the drivers.
All proceeds go to the Victory Junction Gang Camp and Contentnea VFD.

Five Dollars a person 12 and under Free.
Food and drinks will be available.
Kids rides and more
DJ playing music after races.
______________________________________________________________________
____________________
If you are coming from GA here are the directions
I-20 E via the ramp on the LEFT toward AUGUSTA (Crossing into SOUTH
CAROLINA)
Merge onto I-95 N via EXIT 141A on the LEFT toward FAYETTEVILLE
(Crossing into NORTH CAROLINA).
Merge onto US-264 E via EXIT 119.
Merge onto US-301 N via EXIT 43A.
End at 2331 Us Highway 301 S Wilson, NC 27893-8556, US

If you are coming from Boston MA here are the directions
I-90 W / MASS PIKE / MASSACHUSETTS TURNPIKE (Portions toll).
Merge onto I-84 W via EXIT 9 toward US-20 / STURBRIDGE / HARTFORD
(Portions toll) (Crossing into CONNECTICUT).
Merge onto CT-15 S via EXIT 57 on the LEFT toward I-91 S / CHARTER
OAK BR / N.Y. CITY.
Merge onto I-91 S via EXIT 86 toward NEW HAVEN / N.Y. CITY.
Merge onto I-95 S via the exit on the LEFT (Portions toll) (Crossing
into NEW YORK).
Keep RIGHT to take I-95 S toward G W BRIDGE / LOWER LEVEL / LAST NY
EXIT (Crossing into NEW JERSEY).
Keep LEFT to take I-95 EXPRESS LN S / NEW JERSEY TURNPIKE S toward I-
80 / GARDEN STATE PARKWAY / PATERSON.
Take I-95 S / NEW JERSEY TURNPIKE S toward US-46 / NEWARK (Portions
toll).
Keep RIGHT to take NEW JERSEY TURNPIKE S toward CARS-TRUCKS-BUSES
(Portions toll).
NEW JERSEY TURNPIKE S becomes I-295 S (Portions toll) (Crossing into
DELAWARE).
Merge onto I-95 S via the exit on the LEFT (Portions toll) (Crossing
into MARYLAND).
Merge onto I-495 W / CAPITAL BELTWAY via EXIT 27 toward SILVER SPRING
(Crossing into VIRGINIA).
Merge onto I-95 S via EXIT 57A toward RICHMOND
Merge onto I-295 S via EXIT 84A on the LEFT toward ROCKY MT NC.
Take the I-295 S exit on the LEFT toward I-95 SOUTH / EMPORIA / ROCKY
MOUNT NC.
Merge onto I-95 S (Crossing into NORTH CAROLINA).
Merge onto US-264 E via EXIT 119.
Merge onto US-301 N via EXIT 43A.
End at 2331 Us Highway 301 S
Wilson, NC 27893-8556

Local Places To Stay: There are many more that I did not list.
Econo Lodge
1815 Us Highway 301 S
Wilson, NC 27893
(252) 243-1900
Deluxe Inn of Wilson
2617 Us Highway 301 S
Wilson, NC 27893
(252) 237-1178
Relax Inn
2650 Us Highway 301 S
Wilson, NC 27893
(252) 243-8437
Beefmastor Inn
2656 Us Highway 301 S
Wilson, NC 27893
(252) 237-7343
Quality Inn South
2901 US Highway 301 S
Wilson, NC 27893
(252) 243-5165
Travelodge
2901 Us Highway 301 S
Wilson, NC 27893
(252) 243-5165
Best Western Lasammana
817A Ward Blvd
Wilson, NC 27893
(252) 237-8700
Holiday Inn
2308 Montgomery Dr W
Wilson, NC 27893
(252) 246-1588
Microtel
5013 Hayes Pl W
Wilson, NC 27896
(252) 234-0444
Hampton Inn
5606 Lamm Rd
Wilson, NC 27896
(252) 291-0330

Places To Dine: There are many more that I did not list.
McDonalds No 2
4816 Ward Blvd
Wilson, NC 27893
(252) 291-3344
Western Sizzlin Steak House
101 Bruton St NE
Wilson, NC 27893
(252) 291-6100
K & W Cafeteria
116 Raleigh Road Pkwy N
Wilson, NC 27893
(252) 291-8828
Gators Sport Pub
2330 Nc Highway 42 E
Wilson, NC 27893
(252) 237-1625
Applebee's
2300 Forest Hills Rd W
Wilson, NC 27893
(252) 399-0504
Chili's Grill & Bar
2823 Raleigh Road Pkwy W
Wilson, NC 27896
(252) 246-0069


Parts Locations:
Kens Small Engine Repair
6028 Nc Highway 58 S
Stantonsburg, NC 27883
(252) 238-3163
Bethel Small Engine Repair
458 House Rd
Bethel, NC 27812
(252) 531-5243
Advance Auto Parts
415 Ward Blvd
Wilson, NC 27893
(252) 243-2169
Wilson Lawn & Garden Equipment Company
3042 Forest Hills Rd SW
Wilson, NC 27893
(252) 237-5542
Autozone
1201 Tarboro St SW
Wilson, NC 27893
(252) 243-7292

We pull all over Northern Indiana, Just wondering if they pull
deadweight any where else.

With more and more people turning to holistic medicine how are you
going be able to afford to ever build the ultimate "PIG"? There's an
old man here in Indiana with a G, you could put the 70 in the barn
with it and build them both before he even gets his crank turned.

                          YOU DON'T THINK!!!

Does anybody pull with a c?What kind of mods?Thanks for info,JM

For Sale: Minn. Moline ZA Pulling Tractor: $4000

140+ Horsepower!
Aluminum Overhead Cam!
Individually Ported Intakes!
Airplane Updraft Car!
With 16.9-38 V Cut Tires!

Please visit: http://www.taintermachine.com for Contact Info,
Pictures and Video. Click on the "Pulling Tractors" link.

i think i may have one.if i dont a buddy should,he has enough green
around,pulling or stock is the next question?

sorry cant help but ineed an exhaust manifold for a 530 jd


pvillepumper <pvillepumper@...> wrote:
can anyone help me locate a 101? I have a chrystler motor built but
need a place to put it.no need to have all the chrome.a good hood would
be nice.need trans, frame,steering hood.thanks.




---------------------------------
Yahoo! Groups Links

    To visit your group on the web, go to:
http://groups.yahoo.com/group/AntiqueTractorPulling/

    To unsubscribe from this group, send an email to:
AntiqueTractorPulling-unsubscribe@yahoogroups.com

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



---------------------------------
Discover Yahoo!
  Have fun online with music videos, cool games, IM & more. Check it out!

[Non-text portions of this message have been removed]

can anyone help me locate a 101? I have a chrystler motor built but
need a place to put it.no need to have all the chrome.a good hood would
be nice.need trans, frame,steering hood.thanks.

For Sale: Minn. Moline ZA Pulling Tractor: $5000

140+ Horsepower, Aluminum Overhead Cam,
Individually Ported Intakes and an Airplane Updraft Carb
With or Without 16.9-38 V Cut Tires and Many Other Toys

For Contact Info, Pictures and a Video:
Please visit: http://www.taintermachine.com and click on the
"Pulling Tractors" link.

You've got the right idea Ernie.  Get rid of that
exhaust lift manifold and set it aside.  Before you
put that new or used manifold on, take a die grinder
to it and smooth up the insides.  It'll flow a lot
better without those rough castings.

--- "Ernie H." <xxxernie@...> wrote:

>
>   In regard to the Exhaust assisted lift attachment
> I've decided to
> remove ,for the time being the complete Manifold
> with the diverter
> valve still attached, I think the best plan is to
> get another blank
> manifold to use while I'm pulling this Tractor and
> set up the other
> manifold/lift for the time I decide just to show
> this A  Any
> comments on this gratefully excepted,.
>    Hey does any body get on our chat section to talk
> about pulling?
> restoration? I'd love to chat ,if so get a message
> to me at my e-
> mail about setting up a time and and we'll go for it
> ,,Ernie
>
>
>
>
>




__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail

In regard to the Exhaust assisted lift attachment I've decided to
remove ,for the time being the complete Manifold with the diverter
valve still attached, I think the best plan is to get another blank
manifold to use while I'm pulling this Tractor and set up the other
manifold/lift for the time I decide just to show this A  Any
comments on this gratefully excepted,.
    Hey does any body get on our chat section to talk about pulling?
restoration? I'd love to chat ,if so get a message to me at my e-
mail about setting up a time and and we'll go for it ,,Ernie

Anyone have a U Moline junked out? I need 2 rods for either a 283A or
a KEF motor. Spun two bearings pulling last weekend and am having
trouble finding rods. Tim

Just picked up a 1946 Farmall A that I am going to set-up for
2,500 lb Class. This tractor had the exhaust powered lift on it ,The
chamber on the exhaust pipe is pretty rough,{ was run with no
gaskets for quiet a while,
     Question is do I try to save this chamber for collectors value
or should I just wack it off with Die grinder?

I am to the point i have to sell my B farmall.  If anyone is
interested in the dfw area email me directly and we can talk about
the condition of it.

Beau

New Antique pulling and restoring magazine. If you have up-coming
pulls to be listed let us know. To learn more about Old Power Pride
Magazine visit us here: http://myoldparts.com/OPP2.htm  Thnaks
Jonathan.

Howdy all
Well the time has come and I must sell my 1977 CJ-5, Getting married
in a year or so and need to part with some of my toys. Anyway It has
a 258 straight six, single barrel carb, new brakes, fuel lines, and
electrical components summer of 2001. color dark blue with  Brand New
*Bestop* black rag top. Asking $1800 or best offer. Jeep is at my
farm above Uniontown PA. I'm currently in school in Morgantown WV. If
interested please email me at crankshaft20@... or call 724-984-
2631. Thanks Dan

I am kinda new here, i was wondering if anyone has a B Farmall that
they are either parting out or want to get rid of the complete
tractor at a decent price.  i am rebuilding my first tractor.  and
money is the main issue in it.  so if anyone has or knows anyone who
wants to get rid of parts or a complete tractor let me know.

thanks
Beau

140+ Horsepower
With or Without 16.9-38 V Cut Tires
Many Toys
$5000
715-962-3710

Go to:
http://www.geocities.com/randycarl67/index.html
for a video and photo gallery of this tractor.

does alliswdbk still have d-`17 engine for sale tried email but does
not work. if he or any one else has one email me at
jdtransport03@...

Note: forwarded message attached.


---------------------------------
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing

[Non-text portions of this message have been removed]

I am running a little late, but I did want to thank all the pullers
that came out on the first day of deer season and help open the NATPA
pulling year in Columbia,MO.  After we finally rest and recoop, we
know we really need to thank all that helped, pulled, played and had
a good time!!  Folks, this is truly what pulling is all about,
anytime you are at a pull, if you have time or desire to offer to
help no matter what job you did, you were part of the reason for
SUCCESS!!  Have a great holiday, hope santa brings all the spare
parts your old tractor might need for yet another pull!!  Thanks
again, JR, Vicki, & Donnie

hows the best way to turn up the feul on one

Selling the last remaining JD G and 70 high performance cams at 1/2
price>>>$200.00 per cam plus shipping. These are the .465 inch lift
at the cam lobe cams that have been run all over the United States
since the mid 1980s.   The ones that have the intake lobes advanced
to correct the late intake valve timing.  E-mail Robert Smith at
bigpig41@...  or call any night after 9pm Eastern time at
cell# (863) 604-5159.  One JD A/60 cam left also (.420 inch lift at
the lobe).

1946 Ford 9N Tractor serial #9N210855 located in west central WV.
Good running condition, was used a few days ago to bush hog. Good
body condition, no dents at all, blue paint on hood and fenders faded
with small areas of very light surface rust. Red paint on rest of
tractor has a few small areas of flaking, otherwise in good
condition.  Transmission seems to be good/no problems. Pto works
good. Was barn kept by original owner until 2 years ago.  Good tires
with no leaks.  Has original hood, fenders, front grill & bumper
(brush guard), headlight assemblies, tool box, seat, steering wheel,
pto cap, radiator cap, etc, etc. Has light on fender pointing towards
the rear, has wiring but not hooked up. Comes with manual. 2 years
ago it had new brakes, new exhaust, new plugs, wires, distributor cap
and rotor button, radiator removed and flushed, gas tank removed and
cleaned.  This year it's had a new battery, carb rebuilt, in-line
fuel filter installed and new coil.  Faults: could use a new belt
though the one on it is working fine. The steering wheel could be
recovered but useable as is. Float sometimes sticks.  We have hardly
used it in the past 2 years so we decided to sell.  Selling as is due
to age but have described to the best of our abilities. Will sell for
$2200.00 or possibly trade for 12' stock type trailer. Please feel
free to email with any questions. See pictures at
http://community.webshots.com/album/66950294jSuHmc

1954 MM UB - NATPA legal, very competetive tractor has been top five
in NATPA points 2001-2002, didn't attend enough pulls to make it in
points this year,  very nice paint job, electronic ignition, pulls
well in DIV III, holds its ground in DIV IV, comes with 1000+# worth
of suitcase weights, 3 sets of rear wheel weights, front-belly-rear
weight brackets.
Trailer goes with it or separate, 2000 PJ, double axle-heavy duty,
gooseneck, wooden deck, whole trailor in great shape, original tires
never been patched (the spare does have a plug in it), great trailer
only been used to haul MM to pulls, 95% of miles are highway miles.
Excellent brakes (much better than tractor's!), comes with two heavy
chains and two chain binders.
Can be delivered ASAP anywhere in United States.
$7500 for the whole package, must go as soon as possible.
Call (402)765-7257 only if seriously interested, ask for Jennifer or
email me at jenifer_54@... or reply on this site. Can send
photo's and give any other information required.
Thanks

I have a restored 47 John Deere Model H - Serial # 61021 for sale.
It is currently running on eBay for this week ONLY at the following
location: http://cgi.ebay.com/ws/eBayISAPI.dll?
ViewItem&item=2548229843&category=45012  You can also see a
pictorial and info on the tractor at the following location:
http://www.kimmermodular.com/johndeere.html

* 140+ Horsepower
* Aluminum Overhead Cam
* Individually Ported Intakes
* Airplane Updraft Carb
* With or Without 16.9-38 V Cut Tires
* Many Toys
* $5000 OBO (Reduced from $6500)
* 715-962-3710

Go to:
http://www.geocities.com/randycarl67/index.html
for a video of this tractor pulling.

Send your information to:
Justin Dodge
P.O. Box #784
Waukee, Iowa 50263

The Make/Model/Year, and what classes you wish to pull in.
Can pull up to three times.
$25.00 a Hook.
Make your check out to the (Iowa State Fair Tractor Pull)
We will then send you back the information you need about the pull.
Held at the Iowa State Fair Grounds in Des Moines Iowa.
Starts at 08:00 A.M.

Thanks,
The Iowa State Fair Board